HOW TO USE

General Use

• Apply solution to the surface to be cleaned. Add 12 oz. (1.5 cups) cleaner to 108 oz. (13.5 cups) of water. For heavily soiled areas, add 32 oz. (4 cups) cleaner to 96 oz (12 cups) of water.
• Let solution set for a few minutes. For best results, scrub as needed. Lightly rinse with water. If product dries, reactivate cleaner by scrubbing with a wet brush, or lightly spray with water. Expect foaming action to continue after rinsing. Residual foaming will naturally dissolve.

Power Washer Directions with Chemical Chamber

• Refer to your power washer manual specific for chemical use instructions.
• Fill chemical chamber with undiluted concentrate, apply cleaner until wet.
• Let solution set for a few minutes.
• Use high pressure nozzle to rinse surface.

Power Washer Directions No Chemical Chamber

• Dilute concentrate according to directions for use.
• Apply cleaner solution directly to surface.
• Let solution set for a few minutes.
• Rinse area with high pressure nozzle.

Tank Sprayer Directions

• Apply cleaner solution directly to surface to be cleaned.
• Let solution set for a few minutes. For best results, scrub as needed. Lightly rinse with water. If product dries, reactivate cleaner by scrubbing with a wet brush, or lightly spray with water. Expect foaming action to continue cleaning after rinsing.