Answer:

The B&G Robco 5-in-1 Termite Treatment Kit #420 is for use with a large spray rig and will not work with hand held pump sprayers or backpack sprayers. For smaller scale termite applications and if treating across concrete where there are previously drilled holes, Taurus SC would be the recommended termiticide application to treat soil under concrete and continuing the barrier treatment for a Subterranean Termite Trench Treatment. 

Holes should be spaced 10-12 inches apart, remove cap/plug to the hole, using an 18-24 inch hammer drill bit, clean out the hole of any backed up dirt or debris. Using a hand pump sprayer, mix 0.8 fl oz per gallon of water, using the pin stream spray pattern on the sprayer, spray roughly ½ gallon of mixed solution directly into each hole. Once solution has settled into the holes, replace cap/plug to seal concrete. 

View our Subterranean Termite Treatment Guide for more information on applications across concrete. 

Answer last updated on: 07/20/2022