Talstar P Professional Insecticide - Questions & Answers

Talstar P will not work as a systemic insecticide and will not eliminate insects inside the tree. You will need to purchase a product that contains imidacloprid such as Merit 75 WSP, Adonis 75 WSP, Adonis 2F, Dominion 2L, Criterion 75 WSP and Fertilome Tree and Shrub Systemic. Each of these products will work systemically to help treat for Emerald Ash Borers and Asian Long Horned Beetles but the application and usage rate will vary so you should read the product label of the product you are considering and make sure you are comfortable with the application before purchasing. Systemic products can take several weeks to translocate through a plant. Trees that have not been infested with these beetles can be protected with topical bark sprays like the Talstar P. We recommend you contact your local cooperative extension office and speak to the master gardener or entomologist on staff to find out when the best time to apply a systemic and/or a bark spray would be as this varies from region to region. Heavily infested trees may need to be taken down and chipped or burned to help save the neighboring trees.

Any fruit that was sprayed should be discarded. Please call the manufacturer of Talstar, FMC, for further instructions 800-321-1362.

Once Talstar has had a chance to dry completely it will not reconstitute and it will not pose a higher risk to your pets when it rains.

Talstar, when mixed according to the product label with water is only strong enough to kill small insects, like ants or stink bugs. Your dogs would have to eat huge amounts of stinks bugs at one time to have any type of negative effect on them. In most cases your dogs would not be able to consume enough stinkbugs that have come into contact with treated areas for there to be any cause for concern.

Yes, you can use any size sprayer to apply Talstar.  You typically mix 1 ounce per gallon of water, so if you are using a 2 gallon sprayer and going to fill it all of the way, then you would mix 2 ounces with the 2 gallons of water.

Talstar P is our most popular product for control of zoysia mites. You will need to dilute 1 fl oz of Talstar P per gallon of water and apply the dilution over 1,000 sq ft.

Talstar p should not be used for indoor flea control because it is restricted to cracks and crevices indoors. Ultracide would be a much better choice for indoor flea control. It is our recommendation and industry standard that you vacuum immediately before the application of Ultracide and every day or every other day after the application for the next two weeks. Vacuums can physically remove a decent percentage of flea eggs that are in the carpet, along with much of the organic crud that the flea larvae feed on.  The vacuum will also stimulate the flea adults still in their pupa form to quickly emerge as the adult, and at this point perhaps be sucked up in the vacuum or exposed to the Ultraicde application.  After two weeks most infestations require that you do a second application of the Ultracide and continue with the vacuuming. You should use a product that is registered to use on your pets for fleas such as Frontline or Advantage. Talstar P can be used effectively outdoors for places where your pets may frequent and also moist shady areas where fleas are likely to develop. Treating outdoors will help prevent your pets from re-infesting your home.

Yes, any drastic change in temperature will definitely affect the residual and potency of Talstar P. We recommend storing in a dry cool environment with not much temperature change to get the longest life out of the product. Please read the label for storage information.

When using Talstar P, the mixing ratio is 1 fl. oz. per gallon of water. This will generally treat 1000 sq. ft. For your lawn, you will need to fill up your sprayer at least three times to complete your entire lawn. The pint size of Talstar P would make 16 gallons of solution and treat 16,000 sq ft.

Both non-repellents and repellent insecticides will eventually eradicate the pests that the products are labeled for. Non-repellents allow more time for the insects to be able to take the product back to their colony and transfer the product among each other. "Repellent" insecticides, such as Talstar P, are not detected until the insect you're treating comes in contact with the product - it will give off a "tingling" sansation or so to the insect but by then it will be too late for the insect. Eventually both types of products will work as long as the right amount of product is being used. Talstar P is a great choice to someone beginning to do their own pest control. Please see our Pest Library for more detailed information about specific pests.

Be sure that you do not expect rain for at least 2 hours after Talstar P (Talstar One) application. Once dried Talstar leaves a residual for 2-3 months.

Well, fogging works great as a knockdown when treating for flying insects. You can then apply a residual like Talstar mixed with Archer in a sprayer to keep killing. 

Our most popular general pest control product is called Talstar P. It is safe for indoor use around baseboards, cracks and crevices as well as for outdoor applications. It has minimum mild odor that dissipates by the time it's dry which can take up to two hours. Once the area treated is completely dry it is safe for everyone to go back including children and pets. It is a liquid concentrate and you can mix it at a rate of 1 oz per gallon of water for your first application and follow up at a rate of 0.5 oz per gallon of water. Indoors it can last up to 90 days and 30 days outdoors.

Talstar can be sprayed along baseboards in carpeted rooms. It is not meant to be applied as a broadcast over carpets, more crack and crevices. Baseboards are fine, as it will dry clear. 

Talstar P is a great general use insecticide that can be used both inside and outside for over 75 different pests.  It only kills the insects that contact a treated surface. Dominion 2L is a non repellent termiticide that can also be used a systemic insecticide for the listed pests.  Dominion will help to eliminate more than just want contacts a treated surface or treated soil, social insects will crawl over the product without detecting it, and spread it to each other by touch and food sharing, eventually eliminating the entire infestation.

How long it takes the insects to die after they come into contact with a treated area will depend on a number of factors. It will depend on the maturity of the insect and type of insect as well as how long they stayed on the treated area, how long it has been since the area was treated and the concentration that was used to treat the area. Typically it can take anywhere from a couple of hours to a day or so for them to die

The standar shelf life if stored properly is 3-5 years so it should certainly still be good for you to use. 

Yes, Talstar P will eradicate all spiders including brown recluse, brown widow and black widow species.

Talstar is highly toxic to all aquatic life and should not be used near any bodies of water including rivers, ponds or lakes. We do carry several products like Essentria IC3 that works similar to the Talstar but is a natural product that is completely safe for aquatic life. Please see the product label for full usage insructions depending on what pest you are treating for. On average, the manufacturer recommends using 1-2 oz of Essentria IC3 to every gallon of water. 

Talstar P (Talstar One) is not an instant kill for roaches so it will take time to eliminate them with the product and an IGR. The roaches also have to come in contact with the area that is treated with Talstar P. If you are not seeing success with this product and have been using it for a while, we would recommend using a product with a different active ingredient, such as Demand CS. We would also recommend adding a roach bait gel to your treatment program, if you are not already using one. Please see our Roach Treatment Guide for more information and tips.

Talstar P is the #1 recommended product for bagworm control.  You will need to use 1 oz. of Talstar per gallon of water.  Applications should start in April and continue monthly through June. Be sure foliage is sprayed thoroughly to the point of runoff to achieve adequate coverage.  Talstar can be applied with a hose end sprayer, but it is best to use a hand pump sprayer if possible to ensure the most even coverage.