Yes, you can mix the two products together. We would recommend mixing a small tank mixture with Talstar P and dormant oil to make sure there is no clumping between the two products.
Be sure that you do not expect rain for at least 2 hours after Talstar P (Talstar One) application. Once dried Talstar leaves a residual for 2-3 months.
As a general prevention for indoor and outdoor control Talstar P is one of the most trusted and widely-used insecticides by pest control professionals today. Talstar P has a long residual control. so it keeps on killings pest sfor over three moneths after you have sprayed it. We recommend to use 0.33 to1 fluid ounce per gallon of water to be applied either as a crack and crevice, pinstream, spot, coarse, low pressure spray of with a paint brush. You will want to limit repeat applications to no more than once per seven days.
There are various products that are not available to the general public depending on where they live. We are unsure of exactly what you are asking. These products can be purchased by homeowners, however, the advantage that you have over a homeowner is that they can spray only their home. You can legally spray for profit.
Yes, Talstar P can be used with a garden hose end sprayer. Be sure to change the settings on the hose end sprayer to ensure you are mixing the correct amount.
Talstar P would be a good choice to use around the inside and outside of your home to eliminate centipedes. Indoors you can apply Talstar P to door frames, window frames, places where utilities enter into the structure, and any other place where the insects can gain entry. Outdoors you should apply the product to door frames, window frames, places where utilities enter into the structure, around the bottom of the foundation and out onto the ground directly around the foundation. You can also limit favorable conditions that the centipedes need to thrive.
Remove Favorabe Conditions
Talstar P is not specifically labeled for lace bugs. Sevin Concentrate is labeled for treating lace bugs on azaleas.You will mix 1.5 fl oz per gallon of water per 1,000 sq ft.
Talstar P (Talstar One) should be applied at least 100 feet away from a pond or body of water.
Yes, you can disperse Talstar P and NyGuard IGR in a backpack sprayer and/or a mist blower. You will mix 1 oz of Talstar P to 3ml of NyGuard IGR per gallon of water per 1,000 sq ft.
Talstar P is labeled for almost every insect you could have a problem with (including fleas, ticks and mosquitos) and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets. A hand pump sprayer or backpack sprayer would be the preferred, but the method of application will not determine the results of the product.
Neither the Talstar P or Demon Max are labeled to be used where animals would graze so we would not recommend applying it areas the micro pig could eat. Instead we would recommend using something like Essentria All Purpose which is an all natural product that is OMRI approved and labeled for pastures and rangeland.
Yes, Talstar P can be used outdoors for kissing bugs, as well as various other pests as well. The mixing ratio is 1 fl. oz. per gallon of water.
Termidor SC around the perimeter of the home would be better than Talstar P. Termidor will have transfer effect so can help to eliminate the entire colony whereas Talstar P will only kill the ants that contact a treated surface. It can be applied twice a year or four times a year outside depending on the rate. This link can explain.
Talstar will not harm chameleons or lizards, but it will kill the insects in the area they feed on so you may notice a decline in the number you see around as their food sources will be more scarce. Butterflies and bees are insects and will be affected by an insecticide like Talstar and any other product the same way the target pests like ants and spiders would be. The best way to reduce the chance of the Talstar affecting the bees, butterflies and beneficial insects is to spray later in the day when they are not active and are back in their homes/nests, and try to avoid blooms of flowers and plants they would be using for pollenation. Most structural insects you would be targeting are not going to be landing in the same places they would be so it helps keep you from doing as much damage.
You will need to use 1 ounce of Talstar P per gallon of water for mosquito control. Thank you for your order. We appreciate your business!
Talstar P (Talstar One) will kill bees and wasp that come incontact with the treated area. However, if you know where the nest is in the wall it would be best to use a dust. you can use a hand duster to apply a dust product such as Tempo Dust into and around the area where the bees seem to be gaining access to your home. Over a period of a couple of days to a week (timeline will depend on how many bees are contacting the treated area) this will kill off the colony that has taken up residence in your home. Any insecticide applications should be done very early in the morning or very late in the evening when the bees are less active. After the bees have been eliminated it is important to remove the bee hive from the void where the bees were nesting. Failure to remove the hive can lead to mold issues and secondary infestation from hive beetles and other insects. If the bee hive is in an area that is not easily accessible you may want to consider hiring a professional pest control operator.
Bifen XTS and Talstar P (Talstar One) are both very good general insecticides to use around the perimeter of your home. The residual on both products is approximately 30 days and once the products dry, it is rainfast so rain will not wash it away. Be sure to spray areas where there would be or you have seen activity for pests to ensure that they come in contact with the treated area.
If you are looking for a product that lasts longer outdoors, Suspend Polyzone would be a great option. It has an additional polymer in it that makes it last longer outdoors.
It is not necessary to treat the crawl space with Talstar P unless you are concerned with pests in that area.
It is recommended that Talstar P not be used within 3 feet or outside the drip zone of edibles, which ever one applies.
