Talstar P (Talstar One) can last in the soil for up to 5-7 years, no edibles should be planted in an area treated with it for this reason. It would be best to remove and replace the top layer of soil if just sprayed before doing so.
Talstar P should be used when it is dry outside and there is no rain expected within a 24 hour period.
Yes, Talstar P (Talstar One) can be applied in a boom sprayer for applications.
You should caliberate your sprayer to disperse 1 fl oz per gallon of water per 1,000 sq ft.
The shelf life for Talstar P is between 3-5 years from the date of purchase if stored at room temperature.
Talstar P is for insects only and will not control diseases such as blight. Something like the Monterey Complete Disease Control or Clearys Spectro 90 WDG would be good to use instead.
Once mixed, Talstar P (Talstar One) should be used within 24 hours. 1 ounce in 1 gallon will cover approx 1k square feet. It's recommeneded to treat the interior and exterior all at the same time so that you can have uniform coverage. Please be sure to read the product label for information on the approriate places to treat both inside and outside.
You can spray Taslstar behind appliances, along baseboards, but not around the wall sockets. We suggest you use an insecticide dust such as Cimexa Dust. Cimexa Dust will last up to 10 years when applied to undisturbed areas like wall voids.
Yes, Talstar P is our most popular product for killing mosquitoes. It is recommended to apply every 30 days outdoors.
No, Talstar P (Talstar One) is not labeled to be applied to furniture and it should not apply it to children's toys. If you would like to tell us more about what pest(s) you are targeting, then we would be happy to recommend an alternative treatment.
Yes. Talstar P is one of our most popular product for mosquito control.
Talstar P can be used to help control cluster flies indoors and outdoors. If the cluster flies have already made their way indoors, they will be harder to control because they usually hide in a wall void or other inaccessible area and are only visible when the house warms up. If the cluster flies are in an attic or drop ceiling or other dark area, a fly light would do a great job controlling the population. Using small fly lights such as the Fly Web in the house would also help to catch the flies. Spray Talstar P directly on baseboards, window frames, door frames, and places where utilities (pipes, wires, cables) enter in to the building and any other crack, crevice or gap where insects can enter.
There is no valid reason to mix Suspend Polyzone and Talstar P together. Talstar P is a synthetic pyrethroid and Suspend Polyzone already contains a synthetic pyrethroid, so there would be nothing to gain by mixing these products together. Making a pesticide too strong can actually backfire. Areas that are treated with this overly concentrated spray will be repellent and insects will simply avoid the treated areas, prolonging the infestation.
We recommend to wait at least two weeks to apply Talstar P (Talstar One) where Spectracide may have been applied.
Conserve SC is a great product for treating caterpillars since it is a targeted application and is very gentle on the plants and on other non-target insects and animals. If you are going to do a follow up treatment using Talstar, then I would wait at least 1-2 weeks so that you are not wasting the Conserve application since you don’t need both products at the same time.
Talstar is not labeled for application to carpet and is not recommended for indoor flea control because it is restricted to cracks and crevices only indoors. Ultracide would be a much better choice for indoor flea control. It is our recommendation and industry standard that you vacuum immediately before the application of Ultracide and every day or every other day after the application for the next two weeks. Vacuums can physically remove a decent percentage of flea eggs that are in the carpet, along with much of the organic crud that the flea larvae feed on. The vacuum will also stimulate the flea adults still in their pupa form to quickly emerge as the adult, and at this point perhaps be sucked up in the vacuum or exposed to the Ultraicde application. After two weeks most infestations require that you do a second application of the Ultracide and continue with the vacuuming. You should use a product that is registered to use on your pets for fleas such as Frontline or Advantage. TalstarP can be used effectively outdoors for places where your pets may frequent and also moist shady areas where fleas are likely to develop. Treating outdoors will help prevent your pets from re-infesting your home.
Talstar P is effective for treating clover mites. You will need to mix one oz. to one gallon of water per 1,000 sq. ft.
Talstar is not labeled to be used around ponds, lakes or other water sources. Applications should be kept at least 25 feet away from the pond. Depending on what you are treating for, you could also use something like EcoVia EC instead, which is labeled for many of the same pests and will not harm aquatic life.
Yes, Talstar P (Talstar One) is safe to use on properties with private well systems and will control mosquitoes, wasps, ants, etc.
Talstar P is mixed at one ounce of product to one gallon of water for lawn and turf application for mosquitoes.
