Talstar P Professional Insecticide - Questions & Answers

Our suggestion would be Talstar P.  It is our number one selling insecticide and our best selling product for mosquitoes.  It will also kill spiders as well as about 100 other different insects listed on the product label.

Talstar P CANNOT be applied to anything that you will come into prolonged skin contact with, so you cannot apply it to furniture.  It should be applied to cracks and crevices and perimeter of the rooms only.  For treating sensitive areas like your furniture, you should use Steri-Fab which is labeled for ticks and fleas as well as many other pests and can be applied to furniture, mattresses, pet beds, and all other sensitive areas. Below is a great article on treating indoors and the products that we would recommend for treatment inside the home for fleas and/or ticks.

http://www.domyownpestcontrol.com/fleas-and-ticks-t-10.html

http://www.domyownpestcontrol.com/outdoorindoor-flea-kit-p-1349.html

http://www.domyownpestcontrol.com/tick-control-kit-p-2924.html

Talstar P is very safe to use around children and pets once it is dry.  You are correct that you should remove the bird and any other animals and children from the room while you are performing the treatment.  Once the treatment is dry, which usually takes about 45 minutes, it is perfectly safe to place the bird and other pets back into the room.

You should avoid getting Talstar P into swimming pools though small amounts that accidentally get in a pool will be so diluted that there shouldn't be any concern. Talstar P is labeled to be used in food handling establishments and food handling areas but all of the food prep surfaces and food products and utensils must be covered and the application must be kept to cracks and crevices only. Talstar P is only labeled for use in cracks and crevices when using indoors which is why we would have said no to spraying on the surface of a seat (Talstar P is not labeled to spray on any furniture in general). If you choose to spray around or on your A/C unit you should shut it off prior to the application and resume operation after the application is dry. You should not spray the surface of your lawn furniture with Talstar P (or any other insecticide). If the surface has already been sprayed you should thoroughly wash it with soap and copious amounts of water. When used as directed on the Talstar P product label this product  and the dry residual it leaves behind is safe for people and pets.

We are not sure of the answer to your question. We recommend you contact the Talstar manufacturer directly for more information. You can reach FMC at 800-321-1362

Talstar typically is mixed at 1 ounce per gallon of water.  A 3/4 gallon jug is 96 ounces, so you could get 96 gallons of finished solution from one 3/4 gallon jug if you mixed at the normal rate of 1 ounce per gallon of water.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

Unfortunately there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Talstar. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.

You can absolutely use Talstar P in a large 30 gallon sprayer. Just be sure you follow the correct usage rate for that much water. Talstar granules should be applied using a hand spreader or cart spreader and can be used in conjunction with the Talstar P.

Talstar does not offer an instant knockdown but it does offer a long term residual. Talstar can take several hours to kill insects when used as directed on the product label.

Talstar P would be a great product for the mosquitoes, ants, roaches and gnats. It is a liquid concentrate that you mix with water and apply using a sprayer.  You will need about 1 fl oz of product diluted into 1 gallon of water for every 1,000 sq ft of space you need to treat. The key is to apply it to all shrubs, trees, and other foliage around the house or patio where you are trying to provide relief.  It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out. Talstar P can also be applied to your lawn, exterior of your home for barrier insect control and indoors to control current infestations. Talstar should be applied every 30 days for optimum control. If you don't find a way to alleviate the moisture in the sink hole and in the gutters you will have a constant influx of new mosquitoes and gnats. While Talstar P may help limit their numbers you will keep seeing these pests.

You should use up the bottle of Talstar P within 3 years of the date of purchase for best results.

Talstar P is safe for use on most plants. Having said that we still recommend you test the product on just one or two plants before using it on all of the plants to test for damage as some plants can be more sensitive than others.

You can expect Talstar p to remain effective for 2-4 weeks outdoors for flea and tick control when used as recommended on the product label.

We have never heard of this being an issue. We recommend you contact the Talstar p manufacturer for more information. You can reach FMC by calling 800-321-1362.

ULV, Thermal or Propane Foggers produce micro droplets that are much smaller in size than the size droplets of a mist blower or handpump sprayer.  Fogging tends to move and drift further than a mist due to the droplets being smaller in size. A lot of fogging solutions require the use of kerosene or oil in the mixture which can potentially damage surfaces and often have a strong smell. Fogging Solutions only provide immediate kill and may last anywhere from a few hours to 1-2 days.  
 
Handpump sprayers, backpack sprayers, and mist blowers allow applicators to use microencapsulated insecticides for longer residual outdoors. Using freshwater for mixed solutions allows for applications to be virtually odorless and will not stain or leave an unpleasant scent. Sprayers and mist blowers offer the option of tank mixing other class insecticides for longer and better control. 
 
For example, if treating heavy mosquito populations, we would recommend using 3 products. Talstar P (residual insecticide) with ExciteR (pyrethrin/synergist/knockdown) and Insect Growth Regulator (stops the growth cycle of juvenile insects). These 3 products can be tank mixed in the same tank and applied all at the same time. 

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

We have a great article here on doing your own quarterly pest control.

Talstar P is labeled for over 75 types of insects and our most popular insecticide for general pest control. Talstar P has a residual of 30 days outside (perimeter or broadcast spray) and 90 days inside the home(crack and crevice) Talstar One is odorless, dries clear, leaves no stains, is non-irritating to the skin, and won't break down easily with rainfall.

For Mice control, depending on the level of infestation we recommend the Protecta RTU Mouse Bait Stations Case(12 Stations) with Fastrac Blox. These stations hold 1 bait blox and can be placed in corners where mice travel. Fastrac is a quick knockdown rodenticide with a Stop feed action after consuming lethal dose, usually within 12-48 hours.

If you are needing a larger bait station, we recommend the Protecta Mouse Bait Station that can hold up to 4 standard size blox. These would work better for you under the home.

While Talstar will kill roaches that come in contact with it, it will not stop the problem. Make sure you are not baiting where you have sprayed. Also, be sure that you are only applying little green pea size dabs of bait and re baiting once a week. We would also recommend to include Gentol IGR Point Source. Gentrol Point Source is a special Roach control device that contains the Gentrol Insect Growth Regulator (IGR) hydroprene for 90-day control of roaches and other stored product pests. Activating Gentrol Point Source is as simple as squeezing the raised end of the plastic, adhesive-back device. This releases Gentrol IGR onto a filter paper. From there, it moves up to 75 square feet, damaging adult roaches and preventing them from reproducing.