Talstar P Professional Insecticide - Questions & Answers

Since pine borers are a type of bark beetle you must apply a product directly to the bark to control the beetles and these products are only available in liquid form. Unfortunately there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Talstar. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.

You picked the exact products we would have recommended for your use. Demon WP will hold up very well outdoors as wettable powders are considered very stable formulations. Of course the only downside to wettable powders is that they can leave a white powdery residue behind so we usually will recommend using a product such as Talstar indoors if the powdery residue in a concern.

Talstar P is not labeled to be used on edible plants. The manufacturer does recommend that you discard any fruit from the tree for this growing season if the tree was sprayed with Talstar P.

If you wash down the areas where you have applied Talstar P you will remove the residual effect left behind by the product. Talstar P is a crack and crevice spray only so if you just want to clean up any drips that didn't actually get into the crack or crevice that would be fine and would not have any effect on the efficacy of the product.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests. Talstar is also available in a granule formula called Talstar PL if you prefer to use granules.

These products should not be mixed together. There is no valid reason to mix Cyper WP and Talstar P together.  Talstar P is a synthetic pyrethroid and Cyper WP already contains a synthetic pyrethroid, so there would be nothing to gain by mixing these products together. Making a pesticide too strong can actually backfire. Areas that are treated with this overly concentrated spray will be repellent and insects will simply avoid the treated areas prolonging the infestation.

Extinguish Plus is actually the product of choice in areas where horses may be kept or will be grazing (as long as the horses will not be used for feed or food). Extinguish Plus combines the power of hydramethylnon with an insect growth regulator (IGR) to kill fire ant workers and prevent queens from laying fertile eggs. The result is complete fire ant colony control. Extinguish Plus Fire Ant Bait is best used in the spring or early fall, or whenever fire ants are active. The ants will feed off Extinguish Plus and spread the bait throughout the entire colony, halting the infestation within weeks. You will need about 2 lbs per acre and you can purchase it in a 25 lb bag. Talstar cannot be used on areas where animlas will graze.

Yes it is. The manufacturer changed the name of the product slightly so that they could have the entire line of Talstar products titled similarly.

No. Talstar should not be applied to any seats or furniture. You should instead use a product such as Sterifab. Sterifab is safe to use on areas where you will come into skin contact such as a car seat.

Are you trying to use the Termidor as a Termite barrier?

When the larva or the moths make contact with areas that have been treated with Talstar P or Demand CS they will be killed by the dry residual. They must contact the treated area for any products to work. Typically a crack and crevice application of either product, lots of cleaning under furniture, appliances and under cabinets and lots of vacuuming will help eliminate these pests. Any wool items should be examined for damage and cleaned if needed.

Talstar is not labeled for clothing and therefore would not be safe for application to the sheets.

Since the products were used in an off label usage we will have to refer you to the manufacturers for more information. FMC (Talstar): 800-321-1362  BASF (Termidor): 800-526-1072  We apologize we could not offer more help in this situation.

Talstar P cannot be used in a fogger. Talstar P is labeled to be used in mister blowers such as the Solo Backpack 450 Mistblower.

Talstar P does not repel the termites, but kills them when they come in contact with Bifenthrin the active ingredient.

You can start spraying when the caterpillars are young for best results. We recommend using the 1 fl oz of Talstar P per gallon of water ratio for the fastest knockdown and the longest lasting residual. As for using it in the pressure washer, we really cannot give any advice on that type of application as most insecticide (if not all) are not labeled for use in pressure washer.

Talstar P is labeled to help control flies and can be applied to your lawn.

Our most popular general use product is called Talstar.  It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with and you can use it outside the home as well as inside, it is odorless and very safe for use around children and pets.  It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer.  It will last for 60 to 90 days outside in between treatments.  It is also labeled for lawn and ornamental use, and can be used on trees, plants, bushes and shrubs for all sorts of ornamental pests including Japanese beetles, mosquitoes, and other leaf eating pests.

Talstar would be a great choice. Talstar will not only treat spiders, but over 75 different insects. It dries clear and is odorless.