Yes, you can apply Talstar P Professional Insecticide in your garage as per the label instructions to cracks and crevices quarterly.
Yes, Talstar P Professional Insecticide is labeled for bedbugs and should be applied at the highest concentration of 1 fl oz per gallon of water. According to the product label: "Thorough application should be made to crack and crevices where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers and clothes closets and carpet edges, high and low wall moldings and wallpaper edges. Do not use this product on bed linens, pillows, mattresses or clothes. Remove all clothes and other articles from dressers or clothes closets before application. Allow all treated areas to thoroughly dry before use.
Important note from the manufacturer: “Not recommended for use as sole protection against bedbugs. If evidence of bedbugs is found in/on mattresses, use products approved for this use."
The most effective treatment for active bed bug infestations would be using a combination of products as we have in one of our Bed Bug Kits. These kits are based on how many bedrooms you have and contain enough product for the initial application and 2-3 follow up treatments that are required for bes results. Repeat treatments should be done every 7-10 days until you can go 30 days without seeing any signs of bed bugs or without anyone getting bit.
You may also find it helpful to read our Bedbug Treatment Guide as it contains a lot of useful information regarding where and how to treat for bedbugs.
Talstar P is our most popular product for general pest control. labeled for over 75 different insects and can be used both inside and outside the home. If any of the rental properties has an active German Roach infestation, a combination of products would be the best approach. Temprid FX Insecticide, in addtion to a roach gel bait and insect growth regulator would be the most effective treatment. Take a look at our Roach Control Kits that contain the best combination of products for 2-3 treatments.
These products are all safe to be used around kids and pets when applied per the product labels and once the application has dried. Keep kids and pets out while treating.
Talstar P Professional Insecticide is safe for pets if used as directed on the manufacturer's product label. Both people and pets should be removed from the area while the product is being applied, and once the treated area has completely dried, people and pets can re-enter the treated area.
Yes, Talstar P is labeled to be sprayed in all of the areas you mentioned.
We suggest using the products in our Outdoor Flea and Tick Kit and following the steps in our guide below.
https://www.domyown.com/how-to-get-rid-of-fleas-a-483.html
Demand CS is a micro-encapsulated product that would give you up to a 90 day residual. Please be sure to review the product label for more information and complete application instructions.
Another option would be Onslaught. You may view the full product label here.
Talstar P Professional Insecticide can be used in a backpack sprayer as well as a pump sprayer.
Yes, Talstar is labeled to be used on trees, shrubs, lawns, and indoors cracks and crevices.
Talstar P Professional Insecticide is at applied at a 0.06% dilution of 1fl oz per gallon of water.
Per the product label, For Outdoor applications: apply in late evening when insects are at rest. Aim spray at nest openings in ground, bushes and in cracks and crevices which may harbor nests, saturating nest openings and contacting as many insects as possible. Thoroughly spray nest and entrance and surrounding areas where insects alight. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity.
Talstar P Professional Insecticide is a pyrethroid class and it's a group 3 insecticide.
Talstar P should be applied at least 5 feet away from a well.
Once Talstar P Professional Insecticide has been mixed with water, it should be used within 24 hours.
Talstar P (Talstar One) cannot be sprayed as a broadcast on carpet, it is strictly a crack and crevice application along baseboards, under cabinets, behind appliances, around windows, doors, etc.
While the product will not hurt the carpet, Talstar P is not labeled to be broadcast sprayed over carpeted areas for carpet beetle control. Talstar P can only be used as a crack and crevice application indoors. For indoor carpet beetle control you may want to consider a product such as Nyguard Plus. This product contains an insecticide to kill the roaming adults and an insect growth regulator to stop the harder to kill immature beetles from reaching a reproductive state which in turn will break the cycle of infestation. As an added bonus this product also contains a deodorizer for carpet applications.
Talstar P Professional Insecticide can be applied once a month outside when used as the higher rate of 1 oz per gallon. At the lower rate of 0.5 fl oz it can be applied every 7 days as directed on the label.
Talstar Pis is the #1 recommended product for bagworm control. You will need to use 1 oz. of Talstar per gallon of water. Applications should start in April and continue monthly through June. Be sure foliage is sprayed thoroughly to the point of runoff to achieve adequate coverage. For more information on this pest, please check out this article here.
Martins Surrender Fire Ant Killer would be a great product for you, as you can treat individual mounds as well as your potted plants.
