Talstar P Professional Insecticide - Questions & Answers

Displaying 1381 to 1400 (of 1433 questions)
Sort:
  • Asked by Justin
    07/12/2024
    Q
    Does water with iron in it affect Talstar?
    A

    Talstar P Professional Insecticide can be mixed with fertilizers so iron being in the water should not affect it. Where the water comes from should not make a difference in the efficacy of the Talstar or other chemicals, however if the water is extremely alkaline or acidic that could affect the products stability in the solution.

    Was this answer helpful to you?   Yes No
  • Asked by Chris from Tampa, Fl
    07/14/2024
    Q
    Can Talstar P be applied to artificial turf?
    Using a fogger is Talstar P safe for artificial turf?
    A

    Talstar P Professional Insecticide cannot be fogged but should not harm artificial turf. However, since manufacturers have likely not tested on artificial turf it is recommended to test on a small area first 

    Was this answer helpful to you?   Yes No
  • Asked by Sarah from Mobile, Al
    07/22/2024
    Q
    Is Talstar P compatible with Armada?
    A
    Talstar P does not specific compatibility with Armada so we recommend doing a jar test to make sure they do not have a chemical reaction.
    Most of the time you can apply all of those types of products together and apply them at the same time so long as all the products label of the items you are using allow tank mixing. 
    We would suggest using something like a fungicide by itself unless you have insect and disease damage occurring to the lawn at the same time (as in grubs, chinch bugs, etc), otherwise mix those together for applying. 
     
    Was this answer helpful to you?   Yes No
  • Asked by Wymon from Guin Alabama
    07/28/2024
    Q
    Will this work for southern pine beetles under the bark of a tree or what is better?
    Southern pine Beetles are taking over here in north Alabama I’ve been forced to cut 80 acres of large pine tree all ready and now the beetles are in the younger trees (12 year old) and moving fast,I’ve been looking for something to spray with wanted some recommendations for what to spray with i been using Permethrin 36.8% around the farm for years and it works great for all other bugs
    A

    Unfortunately, there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle, they are protected from topically applied insecticides, and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Talstar. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.
     

    Was this answer helpful to you?   Yes No
  • Asked by Korey from Rogers, Ar
    07/30/2024
    Q
    What sort of protective clothing, other than a face covering is required?
    When it comes to applying this product, what sort of protective gear should I be wearing? I'm going to be using it for brown recluse spiders, and as I read through some of the Q&As, I think it was mentioned that this is only supposed to be applied to baseboards. Is that correct? Can it be applied to the carpet underneath my bed? Will it stain the carpet it comes into contact with?
    A

    Per the Talstar P label, when applying mixed solution, the applicator needs to wear shirt, shoes, socks, pants and waterproof gloves. If applying in a non-ventilated area, applicator will need to wear a resperatory mask. You may look at our Basic Safety Kit for the necessary protective gear.
     
    You can apply as a crack and crevice treatment and to baseboards as mentioned. It is also approved for "spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas." It would not be suspected to stain carpet, however, you can always perform a spot test in an inconspicuous area if needed. 

    Was this answer helpful to you?   Yes No
  • Asked by Susan from Burlington, Nc
    08/03/2024
    Q
    Talstar on outside polywood furniture no cushions
    Can I apply this to my polywood furniture on the porch as wasps are building nests underneath the seats of my rockers and swings.
    A
    Talstar P is not labeled to be applied to furniture. There really aren't any products we can think of that are labeled for this use. We can say many folks have had success by attaching a face nest in the area where the wasps are trying to build their nest. You can search online for instructions on how to make a fake nest. 
    Was this answer helpful to you?   Yes No
  • Asked by Doug from Purcellville Virginia
    09/10/2024
    Q
    Will basal application of Talstat to host trees have residual effect?
    Will proactive application of Talstar on basal applications to host trees (primarily sumac) have a residual effect on feeding Spotted Lantern Flies? Is cut and squirt a method to introduce it to tree cells also effective?
    A
    Talstar P has a residual of 30 days for outdoor applications. For Spotted Lantern Fly, the Supplemental Label advises to apply to foliage and areas where pests are seen or known to harbor. Use application volumes of up to 10 gallons per 1000 square feet to get uniform coverage when treating dense and or long turf foliage. 
     
    Talstar P is not labeled for cut and squirt methods or tree injections. Safari 20SG would an alternative recommendation for basal bark applications. Please view the product label for more information. 
    Was this answer helpful to you?   Yes No
  • Asked by Isidro from Mcallen Texas
    09/13/2024
    Q
    If I spray Talstar on asphalt or concrete slap will it work
    A
    Talstar P only mentions applications to concrete/porous surfaces when treating specifically for ants on the product label.  For ants around concrete areas it is best to treat the ground in the surrounding areas instead.
     
     
    Was this answer helpful to you?   Yes No
  • Asked by Brandon
    09/22/2024
    Q
    Will it work being sprayed in sand for fleas in my dogs chain spot ?
    A
    Yes! It is safe and effective when applied on sand as well. 
    Was this answer helpful to you?   Yes No
  • Asked by Theresa from Pikeville Nc
    10/11/2024
    Q
    Is Talstar P Professional Insecticide safe for horse and donkey pasture?
    A

    Talstar P Professional Insecticide is not labeled to be applied to pastures or where animals graze 

    Was this answer helpful to you?   Yes No
  • Asked by Larry from Highland Lake, Ny
    11/25/2024
    Q
    Can you use Talstar P and Foray 48B together?
    A
    It is not recommended to mix two insecticides like Talstar P and foray together. There is no benefit in mixing two insecticides, and it could also effect the efficacy of each product. 
    Was this answer helpful to you?   Yes No
  • Asked by Bernadette from Odessa
    12/28/2024
    Q
    Is it safe for a home with pets?
    Is it safe for a home with pets? Do we have to leave home when I spray? Can I spray at night before going to sleep? Is it better to spray at night or day?
    A

    Talstar P Professional Insecticide will not affect pets once dry. It does not matter what time of day you apply with the exception of outside. Just keep them out of the area while applying & they may return once the product has dried. Generally within a couple of hours. You do not want to apply during the hottest time of day outdoors as it could burn grass or ornamentals. 

    Was this answer helpful to you?   Yes No
  • Asked by Michael from Portal, Georgia
    01/24/2025
    Q
    How long does the product last?
    If I apply 1 oz to 1 gallon of water and apply it to my yard in April before the fire ants begin to surface. How long should I expect it to last? October? My goal is to spray in April and not have to spray before the cold weather arrives. Should I mix it a little stronger? 1 1/2 oz per gallon? Thanks for your help.
    A

    The highest rate for Talstar P Professional Insecticide is 1 oz per gallon of water and if sprayed on the grass it should be reapplied every 30 days. Fire ant treatments on the label are as follows: 
     
    For Ant and Fire Ant Mounds control is optimized by combining broadcast applications that will control foraging workers and newly mated fly-in queens with mound drenches that will control existing colonies. If the soil is not moist, then it is important to irrigate before application or use a high volume application. Apply broadcast treatments at 0.6 to 1 fluid oz. per 1,000 square feet. Use enough finished volume to penetrate thatch or sod. Treat mounds by applying 1 fl oz Talstar P Professional per mound in 1 to 2 gallons water by sprinkling the mound until it is wet and treat 3 feet out around the mound. Use the higher volume for mounds larger than 12”. Treat mounds with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels.

    Was this answer helpful to you?   Yes No
  • Asked by Nancy from Dickinson, Texas
    01/28/2025
    Q
    Will it treat mice problem?
    A

    No, Talstar P Professional Insecticide will not get rid of mice. Below is our guide on how to get rid of mice as well as product recommendations 
     
    https://www.domyown.com/how-to-get-rid-of-rats-a-525.html

    Was this answer helpful to you?   Yes No
  • Asked by Myra from Georgetown, Ky
    01/31/2025
    Q
    Is it safe to use on fruit trees?
    does the chemicals transfer to the ripen fruit
    A

    Talstar P Professional Insecticide is not labeled for use on or around edibles.

    Was this answer helpful to you?   Yes No
  • Asked by Minho from Riverside. Ca
    02/06/2025
    Q
    Do I need to go outside after applying Talstar P indoors?
    Do I need to go outside after applying Talstar P indoors?
    A

    When applying Talstar P, rooms should remain vacant until the product has had time to dry. 

    Was this answer helpful to you?   Yes No
  • Asked by Minho from Riverside, Ca
    02/07/2025
    Q
    Do I need to go outside after spraying Talstar P?
    After spraying Talstar P, you said to wait for it to dry completely before coming back into the room, how long does it usually take?
    A

    Everyone will need to be out of the area while Talstar is being applied, but it will be safe for them to return as soon as everything is dry (usually 1-2 hours). 

    Was this answer helpful to you?   Yes No
  • Asked by Grace from Pembroke Ga
    02/09/2025
    Q
    Is this product safe around plants and shrubs?
    A

    Talstar P Professional Insecticide should not harm plants or other ornamentals. Just do not apply during the hottest time of the day to ensure it does not damage them due to heat. Remember it cannot be applied to anything edible. 

    Was this answer helpful to you?   Yes No
  • Asked by Gray
    02/20/2025
    Q
    Does this kill birdmites
    A
    While Talstar P is effective against certain mites like spider and clover mites around homes, lawns, and in animal facilities, it's not a general miticide. For broader mite control indoors, Onslaught is a better choice as it's specifically labeled for mites in general. Please review our article on How To Control Bird Mites for further information.
    Was this answer helpful to you?   Yes No
  • Asked by Michael
    08/05/2009
    Q
    Does Talstar P come in an aerosol form?
    A

    Talstar did come in an aerosol can, Talstar Aerosol, but has been discontinued by the manufacturer.

    Was this answer helpful to you?   Yes No
Displaying 1381 to 1400 (of 1433 questions)