Per the manufacturer, the VectorFog BY100 Mini Thermal Fogger will take any standard 8 oz butane tank, but it has to be an 8 oz. No other size will fit. Please let us know if we can be of any further assistance.
Per the Manufacturer there is no adapter for using propane with the VectorFog BY100 Mini Thermal Fogger. You just need to get the correct propane or butane cartridge that would fit the opening in the unit as is. For butane they recommend the Gas One Butane Gas Catridge or the Sterno 50130-8 Butane Fuel Cartridges that you can purchase at Wal-Mart. So a propane cartridge with a similar top would also work. They do not have a recommendation for the propane cartridge. Coleman and GoGas both make one that appear to have the correct fitting on them though.
Shockwave can be diluted with mineral oil. It also can be used in a thermal or propane fogger. Please refer to the product label for full application instructions that will best fit your needs.
We cannot comment for sure if you can use a Black Flag product as we do not carry that brand of products. We can only say that if the product states it can be used in a thermal fogger such as the VectorFog BY100 Mini Thermal Fogger you can do so as directed on it's label.
Recomendamos que contacte al fabricante Vector Fog directamente para obtener un quemador de repuesto para VectorFog BY100. VectorFog se puede contactar al 888-388-1636.
Translation: We would recommend contacting Vector Fog directly for a replacement burner for the VectorFog BY100. VectorFog can be reached at 888-388-1636.
Lamentablemente, no hacemos envios fuera de los Estados Unidos. Puede intentar llamar a VectorFog directamente para ver si hay un proveedor cerca de Usted, el numero es 1-844-780-6711.
Neither Crossfire nor Eco-Raider is labeled for use in a fogger of any kind. If you are treating for bedbugs we do not recommend using a fogger because the fog cannot penetrate into the cracks and crevices where bedbugs like to hide. Please take a moment to read over our bedbug guide for more information on how to perform a successful bedbug application: https://www.domyown.com/how-to-get-rid-of-bed-bugs-a-449.html
The VectorFog BY100 Mini Thermal Fogger has a chemical tank that holds 350 mL (11.67 oz) of concentrate and a dilutant tank that holds 2.8L (0.73 Gallons) of water or oil. This machine applies solution at a rate of 2 L per hour, so how much product you need will depend on how large of an area you are treating and the labeled rates for the insecticide you are applying.
Please provide the targeted pest and area for further product recommendations suitable for the VectorFog BY100 Mini Thermal Fogger.
Shockwave Fogging Concentrate is labeled for mosquitoes and can be used in the Vector Fog BY100 Mini Thermal Fogger.
Please review the full product label for application instructions.
The VectorFog BY100 Mini Thermal Fogger is powered and fueled by a standard butane gas cartridge. The fogger ignites the gas by a piezo and then the gas heats the coiled metal tube. The oil or water solution is then heated and mixed with the fogging solution that creates a mist or fog. You can refer to the manufacturer's instructional manual for product information, which states to "Fill the tank with the dilutant of your choice. Water for water based fogging or oil for oil based fogging.", which would indicate that dilution is required for this particular unit.
However, you may contact Vector Fog directly for clarification and technical support by calling 844-780-6711, emailing [email protected] or by visiting their website's contact page.