The VectorFog C150 Plus ULV Cold Fogger is a cold fogger that can fog large areas when the proper insecticide is used inside of it. This machine has a 8-16 GPH flow rate and can easily treat an area of 328 sq ft in less than 1 minute - making it one of the most powerful ULV fogger on the market. It also features 2 speed output controls, allowing you to adjust the droplet size between 5-50 microns. The tank size is 5 liters, which is also 1.32 gallons.
Riptide would be a great fogging concentrate to use inside of this fogger. It is labeled for various insects, including but not limited to mosquitoes, crawling and flying insects, etc.
The VectorFog C150 Plus ULV Cold Fogger can be used to fog attics and wall voids, but fogging is not a recommended treatment method for termites. The reason for this is because the fogger cannot penetrate into the areas where the termites would actually be active within the interior of the wood. Please see out termite treatment guide here for the best treatment options.
The VectorFog C150 Plus ULV Cold Fogger has a spray distance of 33 feet, so it is possible but it is also powered through an electircal cord which must be plugged in, so it is more for indorr use than outdoor use. We would recommend the VectorFog H100 model, which has a spray distance of 50 - 65 ft, and it is gas powered.
VectorFog C150 Plus ULV Cold Fogger is a fogger and Talstar P cannot be used in it. You would need to use a pump/backpack sprayer or the Solo 451 to apply it or other products that leave a residual. Fogging is only meant to be used to kill those insects that are out in the open. There is not one labeled for use for outside fogging with residual.
The particle size for the VectorFog C150 Plus ULV Cold Fogger is a fogger/mister and can be changed so that the droplets are not so large. Also, it is recommended that you put any type of important papers inside of waterproof containers so that they are not ruined.
VectorFog C150 ULV Cold Fogger is a large fogger that is essential for quick and effective application of fungicides, pesticides, biocides, and disinfectants. This flagship model is equipped with solenoid valve that is constructed out of Teflon, along with an exclusive 1250-watt Samsung motor. It uses Ultra Low Volume (ULV) technology, which produces a powerful 8-16 GPH flow rate and can easily treat an area of 328 sq ft in less than 1 minute - making it one of the most powerful ULV fogger on the market. It also features 2 speed output controls, allowing you to adjust the droplet size between 5-50 microns. This fogger will help make eradication of pests and other vector carriers much easier. It is ideal to use for indoor and outdoor applications. The C150 weighs 10.80 lbs with a 1.32 gallon solution capacity to allow you to cover a large area without refilling.The new and improved C150 Plus has a different port hole location in the machine to help with cooling.
Yes,the VectorFog C150 Plus ULV Cold Fogger is a large fogger that is essential for quick and effective application of fungicides, pesticides, biocides, and disinfectants.
