The VectorFog C150 Plus, previously known as the VectorFog C150 ULV Cold Fogger is a large fogger that is essential for quick and effective application of fungicides, pesticides, biocides, and disinfectants. This flagship model is equipped with solenoid valve that is constructed out of Teflon, along with an exclusive 1170-watt Samsung motor. It uses Ultra Low Volume (ULV) technology, which produces a powerful 8-16 GPH flow rate and can easily treat an area of 328 sq ft in less than 1 minute - making it one of the most powerful ULV fogger on the market. It also features 2 speed output controls, allowing you to adjust the droplet size between 5-50 microns.
This fogger will help make eradication of pests and other vector carriers much easier. It is ideal to use for indoor and outdoor applications. The C150 weighs 10.40 lbs with a 1.60 gallon tank capacity to allow you to cover a large area without refilling.
The new and improved C150 Plus has a different port hole location in the machine to help with cooling. The holes are now on the front instead of on the side.
C150 Plus now comes with a 6 liter (1.60 gallon) tank, previous C150 version came with a 5 liter (1.32 gallon) tank.
Can the VectorFog C150 Plus ULV Cold Fogger be used to fog for termites? If so, any recommendations on termiticide?
The VectorFog C150 Plus ULV Cold Fogger can be used to fog attics and wall voids, but fogging is not a recommended treatment method for termites. The reason for this is because the fogger cannot penetrate into the areas where the termites would actually be active within the interior of the wood. Please see out termite treatment guide here for the best treatment options.
Can you give me more details on what the VectorFog C150 Plus ULV Cold Fogger does?
The VectorFog C150 Plus ULV Cold Fogger is a cold fogger that can fog large areas when the proper insecticide is used inside of it. This machine has a 8-16 GPH flow rate and can easily treat an area of 328 sq ft in less than 1 minute - making it one of the most powerful ULV fogger on the market. It also features 2 speed output controls, allowing you to adjust the droplet size between 5-50 microns. The tank size is 5 liters, which is also 1.32 gallons.
Riptide would be a great fogging concentrate to use inside of this fogger. It is labeled for various insects, including but not limited to mosquitoes, crawling and flying insects, etc.
Is the VectorFog C150 Plus ULV Cold Fogger a true fogger or a mister? Don't think this is compatible with Talstar P.
I live in a heavily wooded area and am looking to control mosquitoes/ticks. I would like to broadcast spray Talstar P (with Tekko IGR & ExciteR), but do not want to spend $700 on the Solo 451 blower... I don't want to use Riptide due to no residual effects. Shockwave fogging concentrate has only minimal residual and is ineffective for larger outdoor spaces. Is there a different product/combo that I am overlooking? Thank you.
VectorFog C150 Plus ULV Cold Fogger is a fogger and Talstar P cannot be used in it. You would need to use a pump/backpack sprayer or the Solo 451 to apply it or other products that leave a residual. Fogging is only meant to be used to kill those insects that are out in the open. There is not one labeled for use for outside fogging with residual.
Could the VectorFog C150 Plus ULV Cold fogger be used to fog fruit and nut trees?
We have several 40 - 50 foot tall trees that need to be fogged for fungus and insect attacks. How far will this unit spray a fog?
The VectorFog C150 Plus ULV Cold Fogger has a spray distance of 33 feet, so it is possible but it is also powered through an electircal cord which must be plugged in, so it is more for indorr use than outdoor use. We would recommend the VectorFog H100 model, which has a spray distance of 50 - 65 ft, and it is gas powered.