Xcluder Garage Door Rodent Shield helps protect residential and commercial buildings against rats, mice, and chipmunks by sealing their most common point of entry. It is made of high-quality stainless steel and it works by adhering to the inside of the weather strip without covering or painting required. It is invisible from the exterior and its durable construction will not rust. These specially designed adhesive strips provide an inexpensive solution and efficient rodent proofing for garage door side seals by preventing rodents from gnawing them. These side seals that are usually made of vinyl or rubber makes an excellent weatherstop, but can be easily chomped down by rodents, thus offering no protection. The Xcluder Garage Door Rodent Shield (GDRS) is very easy to install -- simply peel and stick without the need for tools and it installs within 5 minutes. It is available in one size that fits all so there is no need to measure or trim. It comes with two 8 in. x 1 in. strips of adhesive backed 300 series stainless steel.
Install the Xcluder Garage Door Rodent Shield at the bottom of the weather stripping on both sides of your garage door.
The Xcluder Garage Door Rodent Shield should be installed so that the shield is on the inside of the weather stripping facing the garage door.
Wipe the inside of the weather stripping with the included alcohol pad. Ensure the surface is clean, dry and free of dirt and debris before attaching the Garage Door Rodent Shield.
Peel off the protective backing off the Garage Door Rodent Shield and affix it to the inside of the weather stripping.
The Rodent Shield should be flush with the bottom and side edges of the weather stripping.
We use Xcluder Rodent Shields daily. They will adhere to most surfaces (after properly preparing the surface) and can easily be trimmed to size. Used with Xcluder stainless steel wool, rodents won't stand a chance.