ENVIRONMENTAL HAZARDS

This pesticide is extremely toxic to fish and aquatic invertebrates. To protect the environment, do not allow pesticides to enter or run off into storm drains, drainage ditches, gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help avoid runoff to water bodies or drainage systems. Care should be used when spraying to avoid fish and reptile pets in/around ornamental ponds.

This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow to drift to blooming crops if bees are visiting the treatment area.

DIRECTIONS FOR USE

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Aerial application is prohibited. Application in greenhouses and nurseries is prohibited. Application through any kind of irrigation system is prohibited. This product may not be used on sod farm turf, golf course turf, or on grass grown for seed. This product may not be applied as a broadcast application to interior surfaces of homes.

When treating adjacent to an existing structure, the applicator must check the area to be treated, and immediately adjacent areas of the structure, for visible and accessible cracks and holes to prevent any leaks or significant exposures to persons occupying the structure. People present or residing in the structure during application must be advised to remove their pets and themselves from the structure if they see any signs of leakage. After application, the applicator is required to check for leaks. All leaks resulting in the deposition of termiticide in locations other than those prescribed on this label must be cleaned up prior to leaving the application site. Do not allow people or pets to contact contaminated areas or to reoccupy contaminated areas of the structure until the clean-up is completed.

SHAKE WELL BEFORE USING.

Subterranean Termite Control

Use Directions
Important: Avoid contamination of public and private water supplies by following these precautions:

• Prevent siphonage of pesticide back into water supplies by employing anti-backflow equipment or procedures.
• Do not contaminate cisterns or wells.
• Do not treat soil that is water-saturated or frozen

For information on the recommended distances of wells from treated areas, consult state and local specifications. If such regulations do not exist, refer to Federal Housing Administration (H.U.D.) Specifications for guidance.
Note: Crawl spaces are to be considered as part of the interior of the structure.
Critical Areas: Special attention should be paid to areas where the foundation is penetrated by utility services, cracks and expansion joints, bath traps and locations where cement constructions have been poured next to the foundation (for instance, stairs, patios, and slab additions).

INDOOR USE
In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food
should be covered or removed.

• Ants, Bees, Beetles, Boxelder Bugs, Centipedes, Cockroaches, Crickets, Earwigs, Firebrats, Flies, Millipedes, Pillbugs, Scorpions, Silverfish, Sowbugs, Spiders, Ticks, Wasps
  • 0.02 – 0.06% suspension (0.33 – 1 fl. oz/gallon water)
  • For residual control of the listed pests in buildings, structures, and on modes of transport, apply as a crack and crevice, pinstream, spot, coarse, low-pressure spray (25 psi or less), or with a paintbrush. Do not use as a space spray, or as a broadcast application to interior surfaces of homes.
  • Apply to areas where pests hide, paying special attention to cracks and crevices. Apply to baseboards, corners, storage areas, closets, around water pipes, doors, and windows, in attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, under shelves, drawers and similar areas.
  • Cockroaches, Crickets, Firebrats, Scorpions, Silverfish, Spiders, and Ticks: Apply as a coarse, low-pressure spray to areas where these pests hide
  • Ants: Apply to trails, around doors and windows and other places where ants may be found.
  • Bees and Wasps: Apply to nests late in the evening when insects are at rest. Thoroughly spray nest as well as its entrance and surrounding areas where insects alight
  • Boxelder Bugs, Centipedes, Earwigs, Beetles, Millipedes, Pillbugs, and Sowbugs: Apply around doors and windows and other places where these pests may be found or where they may enter premises. Also, spray baseboards and storage areas.

Mixing Directions: See mixing directions in “Pest Control on Outside Surfaces and Around Buildings” section. Dilute Agrisel Bifenthrin Pro 7.9 Insecticide with water for spray or brush application. First, fill the sprayer with the desired volume of water and then add Agrisel Bifenthrin Pro 7.9 Insecticide. Before spraying, close and shake sprayer to ensure proper mixing. Prepare only the amount of solution needed for the application. If pest pressure is high, the area may need to be retreated to ensure and/or maintain control. Reapply only if there are signs of renewed insect activity, and do not reapply more than once a week (7 days).

*See label for the complete list of application instructions.