Per the product label, Bonide Stump Out Stump & Vine Killer will kill blackberry. For vine treatments, cut the vine first and treat as you would for a stump treatment. Apply the product undiluted using the applicator top, completely cover the freshly cut surface to kill the stump/vine and prevent sprouting.
Bonide Stump Out Stump & Vine Killer is labeled for locust.
To apply as a Stump Treatment: Apply this product undiluted to kill stumps and prevent sprouting. Using the applicator top, completely cover the freshly cut surface.
To use for Vine Control: For best results when treating vines such as poison oak, poison ivy, etc. that grow on or around desirable plants, cut the vine first and treat as directed above for stump treatment. Do not let product contact desirable plants.
To apply as a Foliar Spray: In a hose-end or tank sprayer, mix 8 to 16 tablespoons (4 to 8 fl. oz.) in enough water to make one gallon of spray mixture. Apply at the rate of one gallon spray mixture per 500 sq. ft. Coverage will depend on the amount of foliage to be treated. Apply as a thorough foliage spray to wet all leaves using a coarse spray pattern with low pressure. Use the higher rate for mature or hard-to-control plants (such as ash, blackgum, choke cherry, elm, maple, oak, pine, or winged elm), or during drought conditions. Using low rates may result in resprouting of weeds in a year following treatment. Make applications when brush and weeds are actively growing with full leaf coverage. In 1 to 6 weeks, symptoms such as wilting will occur. Make applications when the air is calm. Effectiveness may be reduced if rainfall occurs with 24 hours of application.
Bonide Stump Out Stump and Vine Killer is not labeled for dewberries.
Weedmaster is labeled for dewberries.
We apologize but without knowing the name of the actual vine we cannot say for sure that Bonide Stump Out Stump & Vine Killer will be effective on it. The one sticker vines we can find information online about is smilax (deer thorn, catbrier), it has a thorny vine with waxy, heart-shaped leaves, which is not on the labe and appears to be very hard to control. We would recommend contacting a master gardener at a local nursery or local cooperative extension office for help identifying the vine and we can make a recommendation once known.
Yes, Bonide Stump Out Stump & Vine Killer should kill the stump and keep it from sprouting. The Bonide Stump Out Stump & Vine Killer works best when applied to freshly cut stumps so it would be advised to cut the stump before applying. You would still need to do your part to remove the stump but the Bonide Stump Out Stump & Vine Killer will prevent resprouting This product should be applied when rain is not predicted for at least 24 hours to prevent the rain and/or wind from disturbing the product. Please see the label for complete application instructions.
We would recommend cutting the vine and dipping or painting on the fresh cut if its close to the trees,. It is recommended to stay atleast 5-10ft from any fruit trees or desirables when using Bonide Stump Out Stump & Vine Killer
The Bonide Stump Out & Vine Killer will work on the cut stumps of blackberry bushes when used as directed on the product label. You would apply this product undiluted to kill stumps and prevent sprouting. Using the application top, completely cover the freshly cut surface. Be sure you do not apply when temperatures are over about 85 degrees to help reduce risk to nearby plants.
According to the label for Bonide Stump Out Stump & Vine Killer, "for best results when treating vines that grow on or around desirable plants, cut the vine first and treat as directed for stump treatments" which is to apply the product undiluted and to completely cover the freshly cut surface. We recommend to read over the product label instructions. Per the manufacturer, you can use 1-2 oz per Quart of water and spray the suckers directly and that will take care of them as well.
It would be more effective if you waiting to dig up all the Bonide Stump Out treated plants at the same time, unless there are some that you cannot adequately treat due to dead plants.
The Bonide Stump Out Stump & Vine Killer mix rate is 4 - 8 oz. per gallon of water per 500 sq. ft.
Bonide Stump Out Stump & Vine Killer could harm the tree. Could you tell us what you are targeting or more details on the application you are looking to do? Thank you!
Bonide Stump Out Stump & Vine Killer could be used around juniper as long as you are not making direct contact with it to prevent any possible damage.
Yes, the Bonide Stump Out Stump & Vine Killer will kill the stump and the roots when applied as directed on the product label.
Depending on when the vinegar and salt mixture was applied, this could determine if an application of Bonide Stump Out Stump & Vine Killer would be acceptable. We would suggest contacting Bonide directly for their advise on using their product and for any restrictions. Bonide can be reached at 315-736-8231.
Bonide Stump Out Stump & Vine Killer should be applied undiluted to a fresh cut.
Bonide Stump Out Stump & Vine Killer can be used as a stump treatment, for vine control or applied as a foliar spray. For Foliar Spray applications, mix 8 to 16 tablespoons (4 fl oz to 8 fl oz) in enough water to make one gallon of spray mixture. Apply at the rate of 1 gallon per 500 sq ft. Coverage will depend on the amount of foliage to be treated. Apply as a thorough foliage spray to wet all leaves and cuttings using coarse spray pattern at low pressure.
Yes, Bonide Stump Out Stump & Vine Killer will work on regular ground ivy as well as poison ivy. You will use 4 - 8 oz. per gallon of water per 500 sq. ft. Please see the product label for complete instructions.
The Bonide Stump Out Stump & Vine Killer will kill the stump and the roots. You want to cut any suckers sprouts off, and make hatchet marks deep enought to hit the cambium cell layer of the tree. This layer is the growing part of the tree, and it will absorb the chemical to kill down to the roots.
You can use something like the Bonide Stump Out Stump & Vine Killer or Crossbow to get rid of Chinese tallow trees and others. You will need to cut the trees down to the stump, and then immediately treat the stumps. You can apply this product undiluted directly to the fresh cuts.
Yes, Bonide Stump Stump Out Stump & Vine Killer should take care of yaupons as long as they are cut back first and then the product applied to the cuttings. Please let us know if we can assist you any further.
