Yes, Eraser 41% Weed Killer Herbicide can be mixed with water to treat annual and perennial weeds, shrubs and vines or use undiluted for stump treatments. Please refer to the product label for more instructions.
Eraser 41% Weed Killer Herbicide can be reapplied in 7 days as needed. Most treated weeds usually show initial symptoms in 2-4 days and complete kill in 1-2 weeks. Hard-to control weeds may require a second application if not completely dead in 4 weeks.
Eraser 41% Weed Killer Herbicide does not affect insects in the area but the animals could be finding more seeds and insects in the area as the grass/cover they had is killed off.
Please take a moment to view our Grub Inspection and Treatment Guide for more information on how to inspect for Grubs and an effective treatment.
Eraser 41% Weed Killer Herbicide will suppress or control many types of woody brush and trees such as sweetgum when applied as a stump treatment. For best resutls, immediately treat the stump after being cut down (within 5 minutes). Cut stump close to the soil surface, make 4-5 nail holes in the freshly cut stump surface and then flood the stump with undiluted product.
Refer to the Stump Treatment Section located on page 8 of the product label.
Unfortunately, privet is going to be difficult to kill and can take repeat applications to new growth for some time. Glyphosate and triclopyr are the two most effective chemicals to prevent the re-growth of privet hedges.
For young Privet, foliar applications with Eraser 41% Weed Killer Herbicide can be applied at the rate of 2.5 fl oz (5 Tbs) per gallon of water spraying the foliage to wet but not to the point of run off. Good spray coverage over the entire plant is very important as privet shrubs sprayed only on the sides will not be completely killed. The optimal timing for glyphosate treatment is late fall to early winter (November through early January) when day temperatures are mild.
For established privet, we would recommend cut stump treatments where you would cut the stump down just above the ground and then immediately apply a brush killer such as Fertilome Brush Killer with a paintbrush (or full strength) onto the stump. If the privet has an open, tree-like form, cut off the side limbs first and then cut the main truck as close as possible to the ground. If it is growing as a compact shrub, cut it at the base and then drag the whole plant away as one piece
If the privet is taller than 6 to 8 feet, consider using other methods such as brush mulching, basal bark, or cut stump treatment with a 41% Glyphosate + Surfactant or Triclopyr herbcide is suggested.
Please review this article by Alabama A&M & Auburn University Extension Office that has some great information on alternative methods for treating Privet.
Eraser 41% Weed Killer Herbicide is mixed at 1.5 fl oz to 2.5 fl oz per gallon of water per 300 sq ft.
Per the product label, you should use 1.5 fl oz per gallon for annual weeds or seedling weeds and 2.5 fl oz per gallon of water for tougher weed control, perennials, brush and lawn renovations is recommended.
Eraser 41% Weed Killer Herbicide treated areas can be reseeded 2 weeks after the last application.
Crownvetch is hard to control once it is established. Using a glyphosate such as Eraser 41% Weed Killer Herbicide or a triclopyr product is your best option to eradicate. It is recommended to apply per the product label rates on the cut stems and foliage. Follow-up treatment with herbicide is likely required to control any surviving stems or new seedlings. Be sure to avoid any contact with the desirable plants as Eraser is a non selective that will kill anything sprayed.
You want to make sure any Eraser 41% Herbicide is kept off of green foliage or roots directly as it will impact any green growing plant its sprayed on. You can use it within a few feet of desirable vegetation as long as you do not saturate the soil to reach the root zone.
Yes, if you are looking to kill your entire existing lawn as well as short term prevent new weeds from coming up, you are welcome to use the Eraser Herbicide mixed with Tenacity as a pre emergent. Keep in mind that Tenacity will not work on all weed species and some likely will still emerge after an application, as well as that it only lasts in the soil about 30 days.
After an application of Eraser 41% Weed Killer Herbicide, it is pet safe as long as it has fully dried. However, if your dog shows any signs of distress, we recommend reaching out to your vet.
There is nothing labeled for this invasive ground cover and even non-selective herbicides like Eraser 41% Weed Killer Herbicide do not seem to be very effective in getting rid of this pesky invader. You could try a combination of soil sterilants and a stronger glyphosate product RoundUp QuikPro in that area to try to control the plant but we cannot guarantee it will work. It is important to note that nothing will be able to grow in this area for at least a year after an application of a soil sterilant and that if you are treating on an incline the soil sterilant could travel through the soil and kill desirable nearby plants.
Yes, Eraser 41% Weed Killer Herbicide is a non selective herbicide that will kill anything sprayed. You should avoid any contact with desirables plants. Fertilome Over the Top II is labeled to kill grassy weeds in lirope or monkey grass as well as various other ornamentals and ground covers. The mix rate is 1 oz. and 1 oz. of oil concentrate per gallon of water per 1,800 sq. ft. Please see the label for complete application instructions.
Eraser 41% Weed Killer Herbicide is labeled to target field sandbur. You can refer to the product label for a complete list of target weeds, and for complete application instructions.
Eraser 41% Weed Killer Herbicide is applied at 1 1/3 oz per gallon of water to control most annual weeds; use 2 2/3 oz to control tougher or hard to kill perennial weeds. Please refer to the product label for complete application instructions.
Eraser 41% is not labeled for use around existing Round-Up Ready corn or other crops. Corn can be planted 3 days after an application of Eraser.
Cornerstone Plus Herbicide is labeled for use on Roundup Ready Corn and other crops. You can view the specific section for Roundup Ready Corn on pages 41-44 on the product label.
Eraser 41% Weed Killer Herbicide is safe for animals as long as they are kept out of the area during application. They are safe to re-enter the area once the product has completely dried. You may consider using RoundUp Pro Concentrate if you need a product that is safe for grazing animals.
Eraser 41% Weed Killer Herbicide should not be applied in temperatures below about 60 degrees for best results.
Eraser 41% Weed Killer Herbicide is applied at 1 1/2 oz. per gallon of water (per 300 sqft) to control most annual weeds and 2 1/2 oz. per gallon of water (per 300 sqft) to control hard to kill perennial weeds.
