Exacticide Applicator Duster - Legacy Entry Model Kit

Exacticide Applicator Duster - Legacy Entry Model Kit
Exacticide Applicator Duster - Legacy Entry Model Kit
Exacticide Applicator Duster - Legacy Entry Model Kit

Ask A Pro

Call Us: 866-581-7378
Mon-Fri 9am-5pm ET
Email Customer Service
For help with your order
Live Chat
DIY Pros Available Now

You May Also Need

N95 Valved Respirator Mask
$15.33
Temprid FX 8 mL
$9.98

Average Rating

There are no reviews for this product yet. Be the first.

Product Overview

Exacticide Applicator Duster - Legacy Entry Model Kit is a fine granule applicator and electric power duster with a non-adjustable and fixed flow rate. This applicator is battery operated allowing the versatility required to complete various types of job if not all. It provides precise application of all fine granules while preventing over application making it a cost-efficient choice. This applicator system is proven to be a multifaceted pest eradication tool which can be used for exterior and interior applications. Cracks and crevices including hard to reach areas are now easy and uncomplicated targets with this applicator. It comes with a carrying case making storage easy. Each Exacticide Application Duster Legacy Kit comes with a carrying case, 1 rechargeable Makita battery, 1 battery charger, 2 dust canisters, and 2 12-inch wands.

This Legacy Entry Model Kit has a non-adjustable and fixed flow rate. If you are looking for an adjustable flow rate, you will want the Exacticide Applicator Duster - PFC Complete Kit.

Features and Specs

For use in: Interior & Exterior Applications: Cracks & Crevices, Voids Pathways, Eaves, Perimeters, Trees, and other hard to reach areas
Application: * See Manual for complete application instructions
Must Read Manual before Using Duster
Voltage: 110v
Sprayer Type: Dust & Granule Usage: Do Not Mix Dust, unless Authorized by Technicide
Do Not Use Drione in the Exacticide
Do Not Use Large Granules - Only use Granules with FG in Name or Label (FG is Fine Granule)
Do Not Use Liquids in the Exacticide
Wand Length (in.): 12 inches
Parts Included: 1 Carrying Case
1 Makita Battery
1 Battery Charger
2 Dust Canisters
2 Wands (12 inches)
Shipping Weight: 5.00 lbs
Manufacturer: Technicide, Inc. (Mfg. Number: Legacy)

Details

DIRECTIONS FOR USE:

  1. Charge the Makita battery that came in with the applicator. Plug the charger into an 110V outlet, or car charger. Place the battery into the charger. Make sure the red light goes on. Allow 50 minutes for the battery to fully charge or 15 minutes for a quick charge.
  2. Once the battery is charged, push the battery into the applicator until the gray tabs click into place. Squeeze the gray tabs and pull to release the battery.
  3. Attach a pre-filled chemical canister to the applicator by turning it over so the trigger is on the top and the applicator is in a horizontal position. Remove the canister cap and twist the canister into the receiver of the applicator. Tighten the canister until snug but do not over tighten. Also, take care to not to cross the threads. When secure, turn the applicator over for operation.
  4. To apply dust or fine granules, place the wand into the nozzle at the front of the unit then twist and push until snug. Turn the applicator upside down (trigger up, canister down), adjust the dial to the highest setting, and squeeze the trigger for 5 seconds in the direction of the target area. Now that the motor is warmed up, adjust the dial to your preferred setting, flip the applicator right side up, insert the tip into a crack, void or in the direction of the target area, and squeeze the trigger. Release the trigger to stop the application.
  5. Please note that you must pause for 1 second between trigger pulls at the lowest settings.

There are no reviews for this product yet. Be the first.

Questions & Answers

Have a question about this product?
  
Q
What is the difference between the Exacticide Applicator Duster Legacy Entry Model Kit and the Exacticide Applicator Duster PFC Complete Model Kit?
A

The Exacticide Applicator Duster – Complete Model unit has an adjustable flow rate, so you can adjust the output from low to medium to high.  The Exacticide Applicator Duster – Legacy Entry Model Kit has a fixed flow rate only.

Was this answer helpful to you?  YesNo