Mineral oil could be used to dilute ExciteR in a fogger. Temprid SC cannot be used in any fogging equipment, if should only be applied using a pump sprayer.
ExciteR will offer a fast knockdown of the insects present at the time of the application but it will not leave a long lasting residual. You may want to consider mixing ExciteR with an insecticide like Talstar to have a fast knockdown of the insects present and a lasting residual to help control the new insects that come into the area.
We do not recommend to apply any liquids to a wood pile you intend to burn. You can apply granules like Niban around the exterior of the wood pile. This product will treat for ants, roachs, and many other insects.
Exciter Insecticide is labeled for grain mites.
ExciteR Insecticide is designed as a contact kill and is active when it is wet. Once the application is dry, usually about 30 min to an hour, there will very little residual effect, if any. Since this is a contact and flushing agent, you would use ExciteR as needed, and the best reapplication timing will depend on what pest you are treating.
We do not recommed mixing kerosene with bedbug products for applications indoors. Please take a few moments to review our treatment article/videos on How to Get Rid of Bedbugs for a successful eradication program. We do offer Bedbug Kits that offer products to perform a treatment along with the non-chemical methods for treatment. The applications for this insect require multiple products and multiple applications for elimination.
You can use Exciter in a ULV/thermal fogger as directed on the product label.
When using ExciteR Insecticide you can use anywhere from .25 - 4.25 oz per gallon of water depending on the pest that you are treating for. Please see the product label for specfic instructions.
You really would not need to mix ExciteR or a similar knockdown agent with Zenprox EC. Zenprox will do a great job killing listed insects on contact. Keep in mind that Zenprox EC is for indoor use. If you were using a different product outdoors, then you could potentially mix ExciteR Insecticide with it for quick knockdown.
Yes, ExciteR Insecticide can and should be mixed with water. You will use 0.25 - 4.25 ounces per gallon of water, depending on the pest you are treating. Please see the product label for specific application rates.
Yes, ExciteR Insecticide can be used with Bifen as part of a mosquito treatment and will provide quick knockdown. You would use 1 oz of ExciteR and 1 oz of Bifen per gallon of water.
ExciteR Insecticide should not leave an oily residue on your home if it is applied per the label. If the product is over applied, it may leave an oily residue. The mixing rate is 1/2-1 fl oz per gallon of water.
Keep in mind that ExciteR Insecticide is a knockdown prouct, so it is only active while it is wet. Per the product label, for carpet beetles:
To control carpet beetles (black, furniture and varied), dilute 4.25 fluid ounces of ExciteR per gallon of water and apply to the entire carpet at the rate of 1 gallon per 750 square feet. Make localized applications under the edge of carpets, floor coverings, and furniture as well as along baseboards, in closets and to infested areas of shelving.
For webbing clothes moths:
To control Clothes Moths, remove infested articles from storage, brush them thoroughly and air-dry them in sunlight for several hours. Dilute 2.125 fluid ounces of ExciteR per gallon of water and apply as a crack and crevice treatment to empty chests, bureaus and storage sites. After airing, infested articles may be lightly treated with the spray solution (keep the nozzle at least three feet from the fabric to avoid staining).