Hi-Yield Triclopyr Ester is not labeled to control morning glory.
It is recommended that after treating with Hi-Yield Triclopyr Ester, you will need to wait until the application is completely dry, usually 2-4 hours, before letting the dog back into the treated areas. There is very little product actually being applied and the small amount that could be ingested should not be harmful to most pets.
Since Gordons Ornamec Over-The-Top Grass Herbicide does not give instructions for tank mixing with other products and would not be recommended to be mixed with Hi-Yield Triclopyr Ester but can be used around the same time in beds/landcaped areas as directed on the product labels.
Hi-Yield Triclopyr Ester is not labelled to treat for helleborine. There is an article here helps explains how to eliminate it.
Hi-Yield Triclopyr Ester can be mixed with water as directed and a dye indicator can be added.
Per the product label, it is recommended that you wait at least three weeks after applying Hi-Yield Triclopyr Ester Ultra to seed the treated area.
We do not recommend coming Q4 Plus Herbicide with other post-emergent herbicides such as Triclopyr Ester. The Q4 already contains 4 active ingredients and covers a wide variety of weeds, so adding more active ingredients could damage your desirable turfgrass.
While you can add a surfactant with Hi-Yield Triclopyr Ester, we do not recommend adding it to Q4 Plus since that can increase the risk of injury to your desirable turf.
If you would like to tell us more about what specific weed(s) you are targeting, then we are happy to offer additional recommendations. Be sure to read and follow the product label(s) of any herbicide(s) that you are using.
Hi-Yield Triclopyr Ester is labeled for Ground Ivy but not English Ivy. With English ivy, because it of the waxy leaves, we recommend using a brush killer such as Bonide Poison Ivy and Brush Killer.
Yes, you can mix Triclopyr Ester with Tenacity herbicide to achieve better control of tough weeds such as Bermudagrass and clover. We recommend that you review the Tenacity Supplemental Label here that addresses rates for these products when mixing.
Per the label, Hi-Yield Triclopyr Ester should not be applied to warm season grasses, including zoysia grass, unless you know turf injury can be tolerated.
Hi-Yield Triclopyr Ester is not labeled to control hairy bittercress. If you let us know what type of turf you have we can recommend something for you.
You can mix Hi-Yield Triclopyr Ester with Tenacity for post-emergent weed control. This combination is recommended for control of tougher weeds including clover and wild violet as well as additional control of common Bermudagrass and black medic, per the supplemental label here.
We still recommend this as a spot treatment only. This combination should be used only on tall fescue, Kentucky bluegrass, and perennial ryegrass.
Hi-Yield Triclopyr Ester is not labeled to control lesser celandine, so we are not sure if it would be effective. Lesser celandine is a very difficult plant to control, and you will probably have to use a non-selective herbicide such as RoundUp QuikPro to spot treat it carefully. Herbicides which contain the active ingredient glyphosate, such as Round Up, are effective in controlling (but not necessarily eradicating) lesser celandine. Applications should be made in late winter or early spring when leaves are visible, but prior to full flowering, and when temperatures are above 40°F. Glyphosate will impact other vegetation so try to target only the celandine. It may take 1-2 weeks before the full effects of the treatment are visible.
This article has more information about cultural control of this weed:
http://elibrary.dcnr.pa.gov/GetDocument?docId=1738711&DocName=LesserCelandine.pdf
Round Up QuickPro:
https://www.domyown.com/roundup-quikpro-15-oz-packs-p-1125.html
Thanks,
No, Hi-Yield Triclopyr Ester is not labeled to control nut sedge. Sedgehammer + would be a great alternative for sedge control, but be sure to check the product label for use instructions and areas its safe to be applied.
Hi-Yield Triclopyr Ester is not labeled for cut stump applications. ? Remedy Ultra Herbicide is a similar product that is labeled for this use. Cut Stump: 20 to 30 gallons with oil to make 100 gallons and Spray the Root Collar area, Sides of the Stump, and the Outer Portion of the Cut Surface, until fully wet. .
Hi-Yield Triclopyr Ester can be applied as a foliar spray at a rate of 3/4 oz per gallon of water. Since this product is not labeled for cut stump applications, we cannot recommend that application with this specific product.
Control of Brazilian Pepper Tree can be tricky, and which herbicide is best will depend on the time of year and method that you are using. This article from the Florida State Extension offers the most detailed recommendations for treating this invasive plant. Usually direct stump treatments offer the fastest control, however this is best done when the trees are not fruiting since seeds may be scattered and start new plants. Garlon 4 Ultra contains triclopyr ester and is labeled for control of Brazilian pepper.
The product label for Hi-Yield Triclopyr Ester states, "Do not make direct applications or allow spray mists to drift onto cotton, fruit or orchard trees, shrubs, grapes, peanuts, soybeans, tobacco, vegetable crops, flowers, citrus, or other desirable broadleaf plants." We would recommend carefully spot treating the oxalis directly while avoiding any contact with desirable plants.
Per the Product Label of Hi-Yield Turflon Ester Ultra, it cannot be applied to bahiagrass, bentgrass, bermudagrass, centipedegrass, St. Augustine grass, or zoysiagrass unless turf injury can be tolerated.
Hi-Yield Triclopyr Ester is not labeled to control wild onion. Depending on your turf type, you can look at using a product like Dismiss Turf Herbicide.
