We don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for you needs is outlined below:
If you need to use 3.6lbs of product per 1,000 sq ft you would add 3.6 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high.
As long as you keep your pets and children out of the area while you treat and until all the areas have dried and settled it will be completely safe for your pets to use the treated area and resume normal activity.
Hi-Yield Weed and Feed 15-0-10 is a post emergent herbicide.
Hi-Yield Weed and Feed 15-0-10 is meant to be used to control over 200 broad-leaf weeds and would not be used for crabgrass or other grassy weeds. Ferti-Lome A-Vert Plus Lawn Food 18-0-12 could be used instead if the NPK match what your lawn needs and your lawn type is listed on the product label. Please refer to the product label for complete instructions.
We don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for you needs is outlined below:
If you need to use 3.6lbs of product per 1,000 sq ft you would add 3.6 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high.
We would recommend consulting with your local Master Gardener at the extension office for fertilizer rotation recommendations. Hi-Yield Weed and Feed 15-0-10 states to apply only 2 times year waiting 30 days between applications. Depending on what the fertilizer you are rotating with and what nutrients your lawn is needing will depend on application rates and rotation times. You may contact your cooperative extension here.
We don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for you needs is outlined below:
If you need to use 3.6lbs of product per 1,000 sq ft you would add 3.6 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high.
No Hi-Yield Weed and Feed 15-0-10? cannot be used around any edibles or fruit bearing trees or vines. Drexel Diuron 80 Herbicide? can be applied only to established vineyards (at least 3 years old) as a band treatment. The product label advises to apply in Spring just prior ot germination of annual weeds. Do not exceed more than 2 applications per year. When using this product in a sequential treatment program, minimum retreatment interval is 90 days.
? Roundup can be used for actively growing weeds as a spot treatment in and around edibles as it does not stay in the soil. Use caution not to spray any vines directly.
After apply Hi-Yield Weed and Feed 15-0-10 it is best to wait about 60 days before overseeding. If seeding is done prior to an application, then you must wait until seedlings have good root growth, about two months or once you have mowed it twice.
Hi-Yield Weed and Feed 15-0-10 does not contain phosphorous. The application timing will depend on a number of factors, such as what type(s) of weeds you are treating and your soil conditions. It would be a good idea to contact your local cooperative extension office for advice on the best time to apply this type of product in your area.
