Per the Nyguard IGR product label instructions you can use varying rates. You use anywhere between 4 ml - 12 ml per gal and then apply over 1000 - 1500 sqft. Talstar is mixed at 1 oz/gal and that generally covers 1000 sqft so when mixing with the NyGuard IGR you would want to use 3 ml up to 8 ml with that 1 gallon of Talstar. In general your first application should use the higher rates.
Any leftover solution of NyGuard EZ1 can be poured out outside along the foundation of the home or you can spray along the foundation to help with insects outside. The product does not reconstitute later if the carpet is shampooed so you can dispose of the dirty water as you normally would.
Once mixed, NyGuard EZ1 should be used within 24 hours. Unmixed solution should be stored in a termperature controlled environment and out of direct sunlight.
NyGuard EZ1 typically dries within 30 minutes to 1 hour.
Insect Growth Regulators like Nyguard IGR will not cause non-repellents to become repellent when used per the product label.
Per the product label: one treatment works for 6 months against hatching cockroaches. Please keep in mind that NyGuard EZ1 does not kill any roaches so it should not be used alone. It will only prevent the young from maturing into reproducing adults. We would recommend using one of our Roach Control Kits instead for the best results. Please take a moment to read over our Roach Treatment Guide for further tips and information.
NyGuard EZ1 is an IGR that is labeled and will be effective against all types of roaches. Keep in mind that NyGuard EZ1 will not kill roaches though, it only prevents them from reproducting. We would instead recommend using one of our Roach Control Kits for the best results. Please take a moment to read over our Roach Treatment Guide for further tips and information.
NyGuard EZ1 is safe for animals when applied as directed on the product label. Animals must be kept out of the area during application but can return once all surfaces are dry.
Nyguard EZ1 can be mixed with any insecticide for application, and would be used at a rate of 1-2 oz per gallon of water depending on the pest you are treating. That gallon of finished solutuon would cover 1000-1500 sq.ft. Please see the product label for further instructions.
Nyguard EZ1 is not labeled for mites. You can find all of our available mite control products here.