Permethrin SFR 36.8% - Questions & Answers

Permethrin SFR 36.8% does state the following on the label for poultry and livestock animals and can be used for both northern fowl mites and lice:  Consult a veterinarian before using this product on medicated, debilitated, aged, pregnant or nursing animals.  It cannot be used a dip only as instructed on the product label directly on chickens and around poultry house.  

Permethrin SFR 36.8% is not labeled for bedbug control in homes. We recommend the use of a combination of products to effectively eliminate bedbugs from your home. We have put together Bedbug Kits that come with all of the products that you will need. For more information on a successful bedbug treatment program, please review our article on How to Get Rid of Bedbugs.
 

Permethrin SFR 36.8% is not labeled for chiggers and may not provide adequate results for you. Onslaught insecticide is labeled for chiggers and can be used both indoors and outdoors as a broadcast spray. Chiggers are not known to infest structures. Chiggers are most likely outdoors in your yard. Many people are lead to believe that the infestation is indoors because they do not feel the effects of the chigger bites right away and then are lead to believe they are being bitten at a later time. Treatments for chiggers should begin in May and could need to continue through the summer as new chiggers move into the area. Treating the entire lawn is of little benefit because chiggers avoid direct sunlight and normally will not infest areas that are mowed or otherwise well maintained. Focus treatment on the unkempt areas of the lawn and lawn edge. You can also use Onslaught to do a barrier treatment around the outside of your home and in your crawl space to stop pests from moving indoors. If you feel strongly that you are being bitten inside by something we would urge you to get a sample of the pest and have it professionally identified by an entomologist. You can find an entomologist in your area by contacting your local cooperative extension office.

We are not sure what type of system you have, indoor or outdoor. We can tell you that Permethrin SFR 36.8% is labeled for use in overhead fly spray systems in livestock premises "Overhead space spray system – 4 fl. oz. to 10 gallons mineral oil". Permethrin SFR is not labeled for any other type of fly spray system. We do carry other products that can be used in different fly spray systems such as Riptide, Vector Ban Plus, and Eco MC Misting.

You can use Permethrin SFR in a hose end sprayer as long as the hose end sprayer you are using can be calibrated to dispense the amount of product you require per gallon of water as directed on the Permethrin SFR product label.

Permethrin SFR can be used to help control flies in and around calf huts. Be sure to read the product label for the complete usage instructions.

Permethrin SFR can be used on livestock only to help control scabie mites. Permethrin SFR cannot be used on humans or in residential areas to control scabie mites.

Yes, combining Exponent with Permethrin will help breakdown any resistance the ticks may have to the product greatly increasing your chances of controlling the population.

Permethrin SFR is the product of choice to control Zimmerman moths. According to the manufacturer of the product you should apply: 4 to 8 Fluid Ounces Per 100 gallons -- or –
Broadcast 0.9 to 1.8 Fluid Ounces Per 10,000 sq. ft. to control this pest.

For most indoor applications of Permethrin SFR you will use 1 2/3 fl. oz per gallon of water. Please refer to the product label complete usage instructions.

We do not recommend using Permethrin SFR 36.8% in a fogger. Depending on what and how you are treating for you could use a product like Shockwave in a thermal fogger.

We usually do not recommend Permethrin SFR 36.8% for treating for bedbugs. This is because of the high chance of resistance. Permethrin SFR is not labeled for use on furniture or mattresses. Instead, we recommend you use a product called Transport Mikron. This product has dual active ingredients to avoid resistance by the bedbugs and it is labeled for use on furniture and mattresses. Transport Mikron is mixed at 1.25 fl oz per gallon of water per 1,000 sq ft. For more information on treating for bedbugs, please take a few moments to review our treatment article on How to Get Rid of Bedbugs.

The Permethrin SFR as well as most other insecticides on the market has a built in measuring reservoir on the bottle for determining how much product you need to use per gallon without needing an additional measuring device for the product. There is no other product that has to be mixed with the Permethrin SFR in the water to make it work or effective.

Both Tengard and Permethrin SFR are oil based. They both use Permethrin 36.8%, but have different manuacturers. Please let us know if you have any more questions.

The dilution rate for Permethrin SFR depends on what you are treating for. It can be anywhere from 1 fl. oz. to 3 fl. oz. per gallon of water. What insect(s) are you treating for?

Permethrin SFR 36.8% is labeled for ticks and can be used in your lawn. The product should not be used within the drip line of the garden. We normally recommend using it at least 2-3 feet away. Once the product is dry, it is safe for your children to go into the lawn. Please let us know if you have any additional questions.

Permethrin SFR 36.8% is not a restricted use product for IL. We offer fast free shipping, if you would like to order online or by phone. 

Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Permethrin SFR.  Unfortunately there is no easy solution when it comes to pine beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them.  The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.

We would recommend that you contact the manufacturer, Control Solutions for the most reliable recommendations for such a sensitive concern. Control Solutions may be reached at (800) 242-5562.

Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a product calledPermethrin SFR. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations.