ProStar 70 WG does not come with a measuring device. You will use 1/4 cup for 1.16 oz. of product. This is equal to four tablespoons.
The 3lb container of ProStar 70 WG will cover 10,600-32,000 sq ft, depending on the usage rate required for your needs. You will mix 1.5-4.5 oz of product in 2 to 5 gallons of water per 1,000 sq ft as a broadcast application. Please refer to the Prostar 70 WG product label for full usage instructions.
Eagle 20EW would be a good one to rotate with Prostar 70 WG.
When using ProStar 70 WG as a soil drench, you would mix 0.36 teaspoons in 1 gallon of water to treat container ornamentals.
Yes, ProStar 70 WG can be used on residential turf.
The ProStar 70 WG has a shelf life of 3-5 years when stored at room temperature, sealed, and stays dry.
ProStar 70 WG Fungicide contains the active ingredient Flutolanil, which is also the active ingredient in Pedigree Fungicide SC.
Please view the full product label for the list of target diseases and application rates.
ProStar 70 WG Fungicide treated areas can be irrigated safely after 24 hours from application. The 24 hour wait time recommneded per the product label regarding rainfall or irrigation is to ensure the application has adequate amount of time to dry to avoid any runoff, draining or puddling that may occur with additional rainfall or irrigation.
The only lawn disease where irrigation is recommended immediately following the application is Fairy Ring.
The conversion rate for dry ounces to dry tablespoons is 2 tablespoons per 1 dry ounce. For the mix rate of 1.16 oz of ProStar 70 WG Fungicide, this is equal to 2.32 tbsps or 9.6 teaspoons.
ProStar 70 WG Fungicide is a wettable granule that you mix with water following the instructions on the label and is measured in oz.
ProStar 70 WG Fungicide can be measured with a small scale or any other measuring device.
According to the ProStar 70 WG Fungicide Product Label: Large Patch- Apply preventively in the fall, alone or as part of a seasonal large patch program, when soil temperatures are at 72-75F. Repeat in the spring when disease activity begins. Repeat applications can be made 28 days apart if needed.
ProStar 70 WG is a group 7 fungicide. We apologize but we do not know why Bayer has not listed this on the product label.
ProStar 70 WG should be mixed with a surfactant prior to application. The finished solution should be applied using a hand pump sprayer or a backpack sprayer. We do not suggest applying herbicides and fungicides using a hose end applicator.
Please keep pets out of the area treated with ProStar 70 WG during the application and until it completely dries.
ProStar 70 WG can be applied in 14-21 day intervals. Please refer to the product label for complete usage instructions.
ProStar 70 WG should be mixed with a non-ionic surfactant for application. Please refer to the product label for complete mixing and application instructions.
ProStar 70 WG can be applied to Zoysia 14 to 21 days after first application. Please see page 2 of the product label.
Each 3 lb jug of ProStar 70 WG contains 48 oz of product. Please refer to the product label for complete mixing and application instructions.