Riptide 5.0% Pyrethrin ULV - Questions & Answers

Riptide 5.0% Pyrethrin ULV can be mixed at 1-2 ounces per gallon water to be applied in a mist blower. 

Riptide 5.0% Pyrethrin ULV is specifically formulated for use in foggers and misting systems. You can read more about how to properly use this product by reading the Riptide product label.

For long lasting control of mosquitoes we recommend treating with Talstar P using a hand pump sprayer. Spray the underside of leaves of trees and bushes around your property and also treat door frames, window frames, and screens to stop the insects from coming indoors. Treat early morning or in the evening when the mosquitoes are most active for the best control. Riptide would only work well for quick control of flying insects but it does not offer a long lasting residual.

Riptide 5.0% Pyrethrin ULV is pyrethrin based which is very toxic to all types of crawling and flying insects like honey bees.

Pyrethrin products only kill bedbugs if you are able to spray the bug directly, and they have no residual control. There is no one product that is appropriate for every area in your home. We have put together Bedbug Kits that feature all of the different products that are required to eliminate bedbugs. Please take a few minutes to look through our bedbug kit page to find a kit that is the right size for your needs. We also recommend using mattress and box spring encasements to help eliminate a current infestation and make future bedbug inspection easier.

Riptide can be used in almost any type of sprayer including a backpack blower sprayer like the Solo Backpack Mist/Blower sprayer.

Using Riptide with the Talstar P will give you a fast knockdown and then the 30 day residual.  Spray Talstar P and Riptide on trees, shrubs and bushes paying special attention to the underside of the leaves. You can also spray your lawn to help control the low flying gnats that tend to land there. Talstar P will give a long lasting residual while the Riptide will give you a fast knockdown. You can use both products in the same area to get both a fast knock down and a long lasting residual. It is best to treat in the early morning or the late evening when these pests are most active.

Riptide is really meant to be used in fogging applications, but it can be used in a hand pump sprayer for some uses. You did not mention what you are spraying for or where you will be spraying, so we cannot tell you the proper usage rate you will need to use. You may be able to find the information you are seeking on the Riptide Product Label or you can respond to this email with the needed information. We also carry Pyganic Pro which is a 5% pyrethrin product that is actually formulated and labeled to be used in a hand pump sprayer and may be more what you are looking for.

No. Riptide cannot be used around boat marinas. Riptide contains pyrethrins which is toxic to aquatic animals and cannot be used around the water. There is only one product on the market that can be used around bodies of water and that is Eco Exempt MC. Many boat marinas have started using this product in misting systems to keep the mosquitoes and gnats away. Please read through the Eco Exempt MC product label and supplemental label to see if this product will fit your needs.

Most folks prefer to use Riptide in these mosquito/insect outdoor misting systems. You will need to use one 1/2 gallon of Riptide per 55 gallon tank.

Riptide 5.0% Pyrethrin ULV can be mixed at 1-2 ounces per gallon water to be applied in a mist blower. Using Riptide with the Talstar P will give you a fast knockdown and then the 30 day residual.  Spray Talstar P and Riptide on trees, shrubs and bushes paying special attention to the underside of the leaves. You can also spray your lawn to help control the low flying gnats that tend to land there. Talstar P will give a long lasting residual while the Riptide will give you a fast knockdown. You can use both products in the same area to get both a fast knock down and a long lasting residual. It is best to treat in the early morning or the late evening when these pests are most active.  For more information on treating mosquitoes, please check out our article on How to Get Rid of Mosquitoes.

Riptide ULV Pyrethrin is really meant to be used in fogging applications, but it can be used in a hand pump sprayer for some uses, such as treating cattle. We would recommend using Talstar P (Talstar One) for spiders and mosquitoes. It can be used in a pump sprayer. You will mix 1 fl. oz. per gallon of water. Talstar P can be broadcast across your lawn, sprayed on shrubs, bushes, flowers, etc. It cannot be used on any type of edibles. This will last about 30 days outdoors. Talstar P can also be used indoors around the baseboards and cracks and crevices.

According to the Riptide label you can use just a pump sprayer to treat cattle "To protect beef and dairy cattle and horses from Horn Flies, House Flies, Mosquitoes and Gnats, dilute 1 part concentrate with 49 parts water, mix well and apply a light mist sufficient to wet the tips of the hair. To control Stable Flies, Horse Flies and Deer Flies on animals apply 2 fluid ounces per adult animal, sufficient to wet the hair but not to soak the hide. Repeat treatment once or twice daily or at intervals to give continued protection."

You could use Riptide 5.0% Pyrehtrin ULV with a ULV fogger to kill those out in the open at the time you do so. It is labeled for mosquitoes, ticks, midges and flies. We recommend reading over the product label for a complete list and instructions.

For residual control, Onslaught is labeled for a wide variety of small flying insects including gnats, midges and other small biting flies and should help reduce the amount of midges on your property. Be sure to spray the areas where you have noticed the midges landing or resting as Onslaught will only eliminate those insects that land on treated areas.  Please refer to the product label for mixing and application instructions.

No, Riptide 5.0% Pyrethrin ULV is not for use on furniture or for indoor residential use.  

Riptide is not very effective in treating for biting mites. It is important to be absolutely sure you are actually dealing with mites. Have the suspected mite identified by a reputable source, such as your local cooperative extension office or a reputable pest control operator. Treatments will vary for different pests. Treatment for say bedbugs is much different than the treatment for mites.  If you do indeed have mites, you must first find the source of the infestation, usually a bird nest or a dead rodent on or in the home. Removal of the infested nest or bird and a thorough cleanup is necessary. For treatment in the home, we recommend you frequently vacuum all carpet and upholstery and dispose of the bag or vacuum contents in a sealed bag outdoors. Spray Sterifab on couches, chairs and other upholstered furniture where you may spend time resting. Use Cimexa Dust in all cracks and crevices around the perimeter of the room. Apply a thin coat of MotherEarth dust to rugs and carpets. Rake (not sweep) nap back and forth, causing dust to enter rug or carpet. Let product sit overnight. Repeat application as necessary and vacuum every 3 - 4 days for effective control. MotherEarth dust does not have a fast knockdown, it can take several days for insects to die after they contact the dust. Onslaught can be used for a faster knockdown. Thoroughly apply as a fine particle broadcast spray using a hand pump sprayer to infested rugs and carpets and other cracks and crevices around the perimeter of each room. Put all clothes through the dryer on high heat to help kill mites and their eggs. We have had many customers use the above recommendations with great success. Most customers report that it can take several months to get rid of all of the mites. Finding and removing the source of the infestation is very important and is the key to getting rid of the mites for good.

Riptide 5.0% Pyrethrin ULV  is labeled for poultry mites. Prepare a dilution of 1 part concentrate to 25 parts water and spray crevices of roost poles and cracks in walls and nests where the Mites hide.Talstar P is also labeled for use in poultry houses and in yards for poultry mite control with residual control. Be sure to read over the product label for complete usage instructions.

Riptide is a contact kill only. Talstar P (Talstar One) lasts for 30 days outdoors. Mosquito Barrier can last up to a month. If you are looking for a product with the longest residual, we would recommend using Talstar P (Talstar One). Please let us know if you have any additional questions.

 Riptide is a contact kill; it does not have any type of residual effect after it is dry.  Talstar P (Talstar One) has a residual effect that would keep on killing for at least 30 days outdoors and 90 days indoors. They are both wonderful options for mosquito control but if you are looking for something that is going to last longer, we would recommend using Talstar P (Talstar One).