VectorFog H200SF Thermal Fog Machine Help - Questions and Answers

VectorFog H200SF Thermal Fog Machine

Customer Q&A

VectorFog H200SF Thermal Fog Machine

(4)

Free Shipping

Info / Buy Now

Ask Question

Asked by Jim from Louisiana

11/04/2015

Q

Is the VectorFog H200SF Thermal Fog Machine a 2 stroke or 4 stroke engine?
Does it run on just gasoline or a gas and oil mixture?

A

Per the manufacturer, the VectorFog H200SF Thermal Fog Machine is a 4-stroke engine that runs on just regular gasoline like you would get from any local gas station. There is no need to mix it with oil.

Was this answer helpful to you? Yes No

13 of 15 people found this answer helpful.
Asked by Kara from Dacula

09/22/2017

Q

The VectorFog H200SF Thermal Fog Machine keeps catching fire every time I use it. What am I doing wrong?

A

According to Vector Fog, if the fuel mixture is too rich that is being used in the H200SF Thermal Fog Machine this can cause the fuel to burn fast and then fire comes out of the nozzle. To fix this issue, they recommend shutting down the fuel valve by following these steps below. You may also conta…
Read Full Answer »
According to Vector Fog, if the fuel mixture is too rich that is being used in the H200SF Thermal Fog Machine this can cause the fuel to burn fast and then fire comes out of the nozzle. To fix this issue, they recommend shutting down the fuel valve by following these steps below. You may also contact Vector Fog directly at 1-844-780-6711 for addtional troubleshooting and assistance. 1. Push START button and hold 2. Once fuel burns up, release the START button. 3. Then, push START button again and slowly with other hand start opening up fuel valve.(You will see fuel creeping up the fuel hose, then the machine will try to start.) 4. Choke again and once it catches the right fuel mixture it will begin working properly. This procedure needs to get done sometimes because customers will move the fuel valve as they operate the machine to give more fuel to the system as it operates, but they forget to return it back to the original position, so when it starts, there is fuel in the system and that's what causes the fire out of nozzle. This unit should not catch fire if the directions on the manual are followed. This procedure and the knocking procedure are on the manual for referencing. Sometimes when customers get comfortable using the machine, they may overlook small things that can make a big difference. This machine has a pulse jet engine and the fuel air mixture is very important for proper operation.

Was this answer helpful to you? Yes No

6 of 6 people found this answer helpful.
Asked by Matthew from Ramsey In

06/15/2015

Q

Can the VectorFog H200SF Thermal Fog Machine be used to fog inside of a warehouse?
I have 2 very large warehouses i have to fog and i am currently only using a tri-jet. Would this speed up the process as it takes several hours with the tri-jet?

A

The Vectorfog H200SF Thermal Fog Machine is labeled for use in a warehouse setting.
VectorFog foggers create a mist or fog that forms an Ultra-Low Volume (ULV) droplet that is between 5-30 microns in length. Studies have revealed that these sizes of droplets are perfect to handle vector carrier
…
Read Full Answer »
The Vectorfog H200SF Thermal Fog Machine is labeled for use in a warehouse setting.
VectorFog foggers create a mist or fog that forms an Ultra-Low Volume (ULV) droplet that is between 5-30 microns in length. Studies have revealed that these sizes of droplets are perfect to handle vector carriers of diseases, pathogens, and pests. Also, solutions may be applied in concentrations of 10-90%, and with flow rates of over 13.2 gallons per hour (GPH) (50 LPH) making them more efficient foggers.

Was this answer helpful to you? Yes No

4 of 4 people found this answer helpful.
Asked by Ron

03/24/2015

Q

What do I use with the VectorFog H200SF Thermal Fog Machine?
What oil base product I can use with this thermal fogger.

A

Any of the products listed under our Thermal Fogging page can be used in the fogger depending on where and what you are trying to treat for.

Was this answer helpful to you? Yes No

3 of 4 people found this answer helpful.
Asked by Rhon from Los Angeles California

06/21/2015

Q

is this VectorFog H200SF ok to use indoor i.e houses/apartments
I have this machine but I really been looking for answers about if I can use this machine to do indoor jobs, please I really want to know because I don't have any manual how if is ok do use indoor

A

Contacting vector fog for advice on whether it can be used in homes/apartments on Monday

Was this answer helpful to you? Yes No

2 of 6 people found this answer helpful.
Asked by Michael from Memphis, Tn

06/08/2016

Q

How far does the fog travel when using a VectorFog H200SF Thermal Fog Machine?

A

When using the Vector H200SF Thermal Fog Machine, the spray distance with an oil based product is 65-82 ft. With a water based product, the spray distance is 29 ft.

Was this answer helpful to you? Yes No

2 of 3 people found this answer helpful.
Asked by Larry from Negley, Oh

07/10/2017

Q

What product can I use in my VectorFog H200SF in a pasture?
I have the VectorFog H200SF. what solution would you suggest to fog outdoors in my pastures to kill and control black Flies, Midge, Deer Flies in my Livestock pasture.

A

We do not currently carry any products that are safe for use on pastures inside of a thermal fogger.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Caleb from Lagos State

06/29/2019

Q

Can we use oil based mixture and a water based solution together with the VectorFog H200SF Thermal Fog Machine?

A

Yes, the VectorFog H200SF Thermal Fog Machine has a nozzle that was specially designed for superior dispersal along with an exceptional Dual-Point inlet technology so you can use either one.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Kris from Stantonsburg, Nc

12/01/2017

Q

I just received my VectorFog H200SF Thermal Fog Machine and it will not start. What should I do?

A

We apologize for any issues you may be having with your VectorFog H200SF Thermal Fog Machine. Please call Vector Fog customer service at 844-780-6711. They will be happy to assist you with troubleshooting.

Was this answer helpful to you? Yes No

0 of 1 people found this answer helpful.
Asked by Daniel from Malta

07/03/2018

Q

How do I fix the VectorFog H200SF when it keeps turning off when opening the chemical valve?
I hold the starter then let go and slowly open the chemical valve. When it opens to create a fog the unit looks like its choking and shuts down.... when i retry 2 or 3 times over fire comes out of the front... what can we do pls?

A

According to Vector Fog, if the fuel mixture is too rich that is being used in the H200SF Thermal Fog Machine this can cause the fuel to burn fast and then fire comes out of the nozzle. To fix this issue, they recommend shutting down the fuel valve by following these steps below. You may also cont…
Read Full Answer »
According to Vector Fog, if the fuel mixture is too rich that is being used in the H200SF Thermal Fog Machine this can cause the fuel to burn fast and then fire comes out of the nozzle. To fix this issue, they recommend shutting down the fuel valve by following these steps below. You may also contact Vector Fog directly at 1-844-780-6711 for addtional troubleshooting and assistance. 1. Push START button and hold 2. Once fuel burns up, release the START button. 3. Then, push START button again and slowly with other hand start opening up fuel valve.(You will see fuel creeping up the fuel hose, then the machine will try to start.) 4. Choke again and once it catches the right fuel mixture it will begin working properly. This procedure needs to get done sometimes because customers will move the fuel valve as they operate the machine to give more fuel to the system as it operates, but they forget to return it back to the original position, so when it starts, there is fuel in the system and that's what causes the fire out of nozzle. This unit should not catch fire if the directions on the manual are followed. This procedure and the knocking procedure are on the manual for referencing. Sometimes when customers get comfortable using the machine, they may overlook small things that can make a big difference. This machine has a pulse jet engine and the fuel air mixture is very important for proper operation. If you are still having trouble, please call VectorFog directly at 844-780-6711.

Was this answer helpful to you? Yes No
Asked by Brandon from Baton Rouge Louisiana

08/14/2018

Q

Where is the VectorFog H200SF Thermal Fog Machine machine made and assembled?

A

The VectorFog H200SF Thermal Fog Machine is manufactured in South Korea.

Was this answer helpful to you? Yes No

0 of 1 people found this answer helpful.
Asked by Chad from Montz, La

09/06/2018

Q

Can I use the VectorFog H200SF to spray for spiders inside of warehouse? If so, what chemical would be the best?
buildings or 35' tall

A

VectorFog H200SF Thermal Fog Machine is labeled for use in a warehouse setting. We would recommend using a ULV concentrate such as Riptide when fogging inside buildings instead of a thermal solution. It should be directed to where spiders currently are as fogging only kills those insects out in…
Read Full Answer »
VectorFog H200SF Thermal Fog Machine is labeled for use in a warehouse setting. We would recommend using a ULV concentrate such as Riptide when fogging inside buildings instead of a thermal solution. It should be directed to where spiders currently are as fogging only kills those insects out in the open at the time you do so.

Was this answer helpful to you? Yes No
Asked by Robert from Redhead Nsw

10/26/2021

Q

Is the VectorFog H200SF Thermal Fog Machine a dual machine capable of running as ULV Fogger with cold chemical?

A

The VectorFog H200SF Thermal Fog Machine is a thermal fogger only, it can only be used as a heated application outside. It can be used with both water and oil based products and has a setting you change for either.

Was this answer helpful to you? Yes No