Advan Eject 75DF Turf Herbicide

Apply Eject 75DF Turf Herbicide to actively growing weeds as a post-emergence broadcast or spot spraying. May be applied just prior to or after seeding, and over-seeding in most situations. The control symptoms exhibited by broadleaf weeds with Eject 75DF Turf Herbicide include leaf and stem curl or twisting and yellowing. Susceptible grasses demonstrate stunting, yellowing, and gradual reddening followed by the death of the weed.

Spraying Instructions

Apply with properly calibrated ground equipment in sufficient water per acre to provide uniform spray distribution (at least 20 gallons of water per acre or at least 0.5 gallon per 1,000 sq. ft.). Low pressure (e.g., 20-40 psi) sprayers are recommended.

Maintain continuous agitation during spraying with good mechanical or bypass agitation. Nozzle screens must be no finer than 50 mesh (100 mesh is finer than 50 mesh).

• DO NOT apply more than 2 pounds of EJECT 75DF herbicide per acre (or 0.73 ounces per 1,000 square feet) in one year.
• DO NOT apply to golf course collars or greens.
• DO NOT apply to fine fescue unless it is part of a seed blend.
• DO NOT apply to Bahia grass, Carpet grass, St. Augustine grass, Centipede grass, Dichondra, or lawns or turf where desirable clovers are present.
• DO NOT apply within 4 weeks after seedling emergence of Kentucky bluegrass, creeping Bent grass, fine fescue blends and perennial ryegrass.
• DO NOT apply to exposed feeder roots of trees or ornamentals. Be particularly careful within the drip line of trees and other ornamental species.
• DO NOT apply into any ornamental bed.