Banner Maxx II Fungicide Help - Questions and Answers

Banner Maxx II Fungicide

Customer Q&A

Banner Maxx II Fungicide

(2)

Free Shipping

Info / Buy Now

Ask Question

Asked by Mark from Muskego, Wi

06/02/2015

Q

What is dilution ratio for a 4.5 gallon backpack sprayer?
Product label states I should apply 4 oz of this product per 1,000 sq ft. I need to treat 10,000 sq ft so I need to apply a total of 40 oz of product. How should I dilute if I am using a 4.5 gallon back pack sprayer to apply?

A

Normally 1 gallon mixed solution will treat 1000 sq. feet. With that being said you would need approx. 16oz Banner Maxx II Fungicide per 4.5 gallon of water.

Was this answer helpful to you? Yes No

14 of 15 people found this answer helpful.
Asked by Glen from Lake Jackson, Tx

10/18/2018

Q

What is the mix rate for Banner Maxx II Fungicide?

A

Banner Maxx II Fungicide can be applied at anywhere from 0.5 – 4 ounces per 1000 sq ft. Not exceeding 4 ounces per 1000 sq ft. Generally speaking, one gallon of mixed solution will treat approx. 1000 sq ft, therefore you can mix 0.5 – 4 ounces into one gallon of water.

Was this answer helpful to you? Yes No

12 of 12 people found this answer helpful.
Asked by Shelly from Toledo Ohio

07/29/2013

Q

Do you dilute Banner Maxx with water?

A

Yes, Banner MAxx is to be diluted with water. Please find the dilution chart on the product label.

Was this answer helpful to you? Yes No

6 of 9 people found this answer helpful.
Asked by Terry from Trinity Florida 34655

04/30/2014

Q

Do you water in Banner Max on paspalum putting greens right after spraying?

A

Banner Maxx II Fungicide does not need to be watered in after application. The application all depends on what you are applying to and treating for. Please be sure to review the Product Label before application. You can also, contact Syngenta 866-796-4368 for more specific information.

Was this answer helpful to you? Yes No

4 of 4 people found this answer helpful.
Asked by Byron from Katy, Tx

08/23/2016

Q

Can Banner Maxx II Fungicide be applied with a hose end sprayer?
I have a St. Augustine lawn and I am using it to prevent brown patch.

A

It is not recommended to use the Banner Maxx II Fungicide in a hose end applicator as they do not deliver an even application and most do not go down to a low enough setting for proper dilution.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by George from Medford, Or

03/17/2019

Q

Can I apply Banner Maxx II Fungicide in direct sunlight?
I use Banner Max to treat black spot on my Rhaphiolepis. I was told to not apply in sunlight. Is this so the fungicide will be absorbed before evaporation? Or is there a photosynthesis effect? I sprayed today at 7:45 AM just as the sun was coming up.

A

Banner Maxx II Fungicide should not be applied during the heat of the day when there is full sunlight as this is when plants are more stressed and will not absorb the product as readily as during less stressful times. Early morning applications are fine.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by Dan from Sterling Va

08/15/2014

Q

20 foot austrian pine needs how much Banner II Max per app
concentrated product per tree

A

Banner Maxx II Fungicide controls numerous diseases on turgrasses, ornamentals and other landscape and nursery plantings. Please provide more information on what it is that you are treating for and we will provide more specific dilution ratios and application instructions that will fit your needs.

Was this answer helpful to you? Yes No

2 of 4 people found this answer helpful.
Asked by Robert from Johannesburg

08/02/2017

Q

What is the dilution per gallon of water using Banner Maxx II Fungicide?

A

Banner Maxx II Fungicide rates vary depending on what you are treating. Please refer to the product label for complete instructions for your specific use.

Was this answer helpful to you? Yes No

2 of 4 people found this answer helpful.
Asked by Andrew from Winside Nebraska

06/07/2018

Q

Does Banner Maxx II Fungicide need a surfactant or can you add a surfactant?

A

Banner Maxx II Fungicide does not need to have a surfactant or any type of adjuvant mixed with it per the product label.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by John from Atco, Nj

03/06/2019

Q

How do I use Banner Maxx II to treat for brown patch?
In your detail block, it says do not apply more than 5.4 gallons in a a calendar year. I have 15,500 sqft of tall fescue grass and need to know how many times to apply in weeks or months on my grass before I purchase your product. Thank you!

A

Per the Banner Maxx II Fungicide product label you would apply 1-2 fl oz per 1000 sqft at 14-21 day intervals.  Begin applications in May or June before disease is present. Tank-mix with a registered contact fungicide labeled for brown patch control at the label rate. Under conditions of high te…
Read Full Answer »
Per the Banner Maxx II Fungicide product label you would apply 1-2 fl oz per 1000 sqft at 14-21 day intervals.  Begin applications in May or June before disease is present. Tank-mix with a registered contact fungicide labeled for brown patch control at the label rate. Under conditions of high temperatures and high humidity, use the higher rates of Banner MAXX II and shorter intervals.

Was this answer helpful to you?   Yes No

1 of 2 people found this answer helpful.
Asked by Jo from Rockville Md

04/13/2019

Q

What is the mix rate of Banner Maxx Fungicide to treat boxwoods?

A

Banner Maxx Fungicide has been discontinued from the manufacturer and replaced with Banner Maxx II Fungicide. The mix rate is dependent on what disease you are treating. Please refer to Rate Chart on page 9 of the product label.

Was this answer helpful to you? Yes No

1 of 2 people found this answer helpful.
Asked by Todd from Ne

08/14/2019

Q

When do you water Banner Maxx II Fungicide in? How long after applying til watering in?

A

Banner Maxx II Fungicide does not need to be watered in after application. The application all depends on what you are applying to and treating for. Please be sure to review the Product Label before application. We recommend no rain or irrigation within the first 24 hrs following the application.
Read Full Answer »
Banner Maxx II Fungicide does not need to be watered in after application. The application all depends on what you are applying to and treating for. Please be sure to review the Product Label before application. We recommend no rain or irrigation within the first 24 hrs following the application.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by T.kouche from Westland, Mi

06/24/2022

Q

Can Banner Maxx II be mixed with, Spectracide Immunox fungus & insect Control or Bioadvanced Fungus control?
e.g. Spectracide Fungus and Insect control and

A

Banner Maxx II Fungicide is also compatible with numerous herbicides and insecticides. Check compatibility before tank mixing (see below). Follow the directions under Mixing Instructions for tank mixes on the label. Observe all directions, precautions, and limitations on labeling of all products us…
Read Full Answer »
Banner Maxx II Fungicide is also compatible with numerous herbicides and insecticides. Check compatibility before tank mixing (see below). Follow the directions under Mixing Instructions for tank mixes on the label. Observe all directions, precautions, and limitations on labeling of all products used in tank mixes.
If Banner MAXX II is tank-mixed with other products, use the following sequence: 1. Always check the compatibility of the tank mix using a jar test with proportionate amounts of Banner MAXX II, other chemicals to be used, and the water, before mixing in the spray tank. 2. Provide sufficient jet or mechanical agitation during filling and application to keep the tank mix uniformly suspended. 3. Fill tank at least 1/2 full of clean water. 4. Add wettable powders to the tank first, allowing them to completely suspend in the tank before proceeding. This process can be hastened by premixing the product in water before adding to the tank. 5. Add flowables or suspensions next. 6. Add Banner MAXX II next. 7. Add emulsifiable concentrates last. 8. Do not leave tank-mix combinations in the spray tank for prolonged periods without agitation. Mix and apply them the same day.

Was this answer helpful to you? Yes No