Battleship III gives you superior post-emergent control of tough broadleaf weeds on fairways, aprons, roughs, sod, lawns and landscape areas. Its 2,4-D free formulation is effective in cool and warm-season turf. The advanced "three-way" formulation contains Triclopyr, Fluroxypyr and MCPA in an easy-to-use liquid formulation. Battleship III controls annual and perennial broadleaf weeds including Dandelion, Chickweed, Black Medic, Knotweed, Plantain, Oxalis, Clover, Cocklebur, Thistle and many other species.
Note: Due to New California State restrictions, this Can Not be Sold in California.
Fluroxypyr 1-methylheptyl ester 4.45% MCPA, dimethylamine salt 37.84% Triclopyr, triethylamine salt 4.07%
Black Medic, Chickweed, Clover, Dandelion, Knotweed, Plantain, Oxalis, Spurge, Thistle, Wild garlic and many others * See label for complete list
For use in
Commercial & Residential Cool & Warm-Season Grass: Golf course Fairways, Aprons & Roughs; Sod Farms; Lawns & Landscape areas * See label for complete list
1.1 - 1.5 oz. per 0.5 - 5.5 gallons of water per 1,000 sq. ft. (3 - 4 pints per acre per 20 - 240 gallons of water) * Use a Surfactant to Increase Effectiveness * See label for complete application instructions
NOT FOR SALE TO
AK, AR, CA, HI, LA, MS CT, NY (Restricted To Licensed Applicators Only)
Add a spray adjuvant, such as DYNE-AMIC for best results
Use a water conditioning agent, such as QUEST, for high PH and water hardness
Avoid applying during excessively dry or hot periods unless irrigation is used
Turf should not be mowed 1 to 2 days before and following application
Reseed no sooner than 3 to 4 weeks after application of this product
For residential turf, golf courses, sod farm and grass grown for seed uses: Apply 3 to 4 pints of this product per acre (1.1 to 1.5 oz. per 1,000 square feet) to control above listed broadleaf weeds. Do not apply more than 4.2 pints of product (1.5 lbs. total ae) per acre per application. Do not apply more than 2 applications per year with a minimum retreatment interval of 21 days. The maximum use rate for most warm season grasses is 3 pints per acre.
On closely mowed golf course fairway bentgrass, apply this product at a maximum rate of 2 pints in 20 to 240 gallons of water per acre (0.73 fluid ounce in 0.5 to 5.5 gallons of water per 1,000 square feet). During conditions which promote turf stress use lower rates, 1 to 1.5 pints in 20 to 240 gallons of water per acre (0.36 to 0.55 fluid ounce in 0.3 to 5.5 gallons per 1,000 square feet). Slight turf yellowing will disappear after one week. To minimize grass injury, a second application should not be made for at least 4 weeks. Avoid swath overlaps. Do not use on golf course greens or tees.
I applied this with a 15 gallon sprayer towed behind my mower. It's important to first figure out how much area a full tank will cover so you know how much herbicide to put in. In my case, one tankful does about a half-acre with mower at idle speed. I saw results within a day, weeds were wilting. So far I am very pleased. No apparent damage to the turf. Be careful with this stuff, it's very concentrated. Important to get the coverage right I think.
I've used this herbicide for about 4 years and it does work on broadleaf weeds in the lawn. However, I've often made the concentrate too strong which has affected the grass, so I recommend not going over the recommended concentration.
I needed a product to spray in between my normal 3way apps with 2-4d in it. This product was more cost effective than most other options, but it did exactly what I needed, as well as putting a good knock down on some harder to control weeds.
I had battleship sprayed around my yard, approx. 30 days later I had to have my dog put to sleep, Not sure if it was poison from the weed killer or him being 13 yrs old! Just curious because I dont want to bury another pet if I cant get another because of the spray in the yard.
Battleship III Herbicide - 2.5 gallon is not harmful to animals after it has dried. We have not had one complaint of it harming pets. If you have any further questions please contact Helena Chemical at 901-761-0050.
How much Battleship III Herbicide should I use per gallon of water?
As with most herbicides the exact volume of water is not very important, you just need to be sure you are getting the correct amount of product on a specific area. In the case of Battleship the product label recommends that if you are treating larger areas that you use 3 - 4 pints of product in at least 20 gallons and at most 200 gallons of water to to treat a entire acre (1.1 oz - 1.5 oz of Battleship per 1,000 sq ft in an adequate amount of water to cover the specified area).
Mix Ratio for Battleship III Herbicide - 2.5 gallon in Backpack Sprayers?
I'd like to do spot treatment and use a backpack sprayer. What is the mix ratio for this in order to get effective control?
You want to mix 1.1 oz - 1.5 oz of Battleship per gallon water to cover 1,000 sq ft in an adequate amount of water to cover the specified area. Depending on what type of lawn you have. Please review the product label before application.
What herbicide should I use in fescue lawn to control broadleaf weeds?
I was wondering if their was a broad leaf herbicide that I could use in my fescue lawn. It is a mix of fine, tall, and red fescue
Battleship III is our most popular selective herbicide for use on fescue grasses. The advanced "three-way" formulation contains Triclopyr, Fluroxypyr and MCPA in an easy-to-use liquid formulation. Battleship III controls annual and perennial broadleaf weeds including Dandelion, Chickweed, Black Medic, Knotweed, Plantain, Oxalis, Clover, Cocklebur, Thistle and many other species.