Yes, Bifen XTS can be applied directly to turf grass.
Unfortunately, there is no easy solution when it comes to oak beetles. Infected trees should be cut down (before the newly hatched beetles fly out of the trees in the spring/summer) and the wood burned or chipped, while other still healthy trees should be sprayed annually to protect them. Because of the natural boring behavior of the beetle they are protected from topically applied insecticides and systemic insecticides (those injected into the tree or applied as a root drench) have proven ineffective for pine beetle infestations. Healthy trees can be protected before the beetles attack by topically spraying them with a synthetic pyrethroid like Bifen XTS. The tree should be sprayed from the ground to 15 ft up the trunk to prevent future infestations. You should contact your local cooperative extension office to find out the best time to start spraying in your region.
NyGuard IGR can be sprayed around lawns, on bushes and other surfaces as directed on the label for midges as an insect growth regulator and can be mixed with insecticides such as Bifen XTS.
Yes, Bifen XTS can be applied directly to turf grass. You can find complete application instructions on the product label.
Bifen XTS is an oil based insecticide that contains bifenthrin and provides water resistant, long lasting residual control. Broad-label Bifen XTS is an excellent choice for customers looking for a high performance, cost effective Bifenthrin product for outdoor perimeter pest control.
Suspend Polyzone on the other hand features a proprietary polymer layer that protects the active ingredient from weather, irrigation and mechanical abrasion. This controlled release formulation, which resists erosion, ensures your treatment will continue to control targeted pests for up to 90 days outdoors and indoors. It also stays right where you put it, so if you want to increase the effectiveness of your treatments.
Yes, Bifen XTS is labeled for armyworms. According to the product label, it is mixed at 0.07-0.15 fl oz per gallon of water per 1,000 sq ft when treating armyworms.
Bifen XTS is labeled to treat armyworms and safe to use on your bermudagrass and buffalograss. To ensure that the best control of Armyworms, Cutworms, and Sod Webworms is achieved, postpone watering or mowing for 24 hours following application.
You can apply Bifen XTS any time before or after seeding. Just keep in mind that if you are disturbing the soil by dethatching or aerating, then we recommend you do that soil alteration before spraying rather than after.
Bifen XTS is labeled to treat for Scorpions outside the perimeter of the home. Mix 1/6 fl oz -1/3 fl oz with 1 gallon of water, apply to a 10 foot wide band of soil andvegetation around and next to the structure, and treat the foundation of the structure to a height of 2 to 3 feet. Use a spray volume of 2 to 10 gallons of dilution per 1000 sq. ft. Trim back any bushes, shrubs or trees so they are touching the side of the house. This will limit the insects access to the house from ground only where they will come into contact with the active ingredient, Bifenthrin.
1 fluid oz = 2 tablespoons
Bifen XTS is a good choice for either a broadcast application or for individual mound drenching for fire ants, depending on which method is the easiest for you. Be sure to follow the application instructions on the product label.
Bifen XTS can be sold to homeowners without a license for use on their own property as long as their state is not listed as "Not for sale to" on the product page.
Bifen XTS should not be applied within 25 ft from a lake/pond containing fish. It is extremely toxic to aquatic life. Do not apply when weather conditions favor drift from treated areas. Care should be used when spraying to avoid fish and reptile pets in/around ornamental ponds.
Bifen XTS is only labeled for indoor use in basements and crawl spaces for the treatment of subterranean termites. It is only labeled for outdoor use in the lawn for flea control. Please contact the manufacturer directly for information on the best way to remove it from the surfaces where it was applied indoors. You can reach Control Solutions at 281-892-2500.
Bifen XTS should be applied once every 4 weeks.
The shelf life of Bifen XTS is 3-5 years provided it is stored at room temperature with no extreme heat or cold and no moisture gets in the bottle. Please let us know if we can be of any further assistance.
Both Bifen IT and Bifen XTS can be used in areas where there is direct sunlight. Bifen IT is a water-based solution, while Bifen XTS is an oil-based solution. Sometimes one solution is preferred, depending on the target pest, so be sure to check the product labels to make sure you are applying the product appropriately for your needs.
Bifen XTS CANNOT be applied animals. Please see our product guide that lists the products safe for application to dogs for fleas.
