Ask A Pro: 762-380-0762 Mon-Fri 9am-5pm ET Contact Us
Fast Free Shipping On Your Entire Order*
DoMyOwn - Do It Yourself Pest Control
  • Use "Spacebar" or "Enter" to expand the My Account navigation menu.
  • Use Down or Tab key to select next menu item.
  • Use Up or Shift+Tab keys to select the previous item.
  • Use Enter/Space key to visit the menu item.
  • Use Esc key to leave the submenu.
  • Use Left/Right arrow keys to allow users to navigate within the navigation links.
  • Use Down arrow key to expand the submenu and up/down arrow keys to navigate within the submenu.
  • Use Enter/Space key to select the menu/submenu items.
  • Use Esc key to leave the submenu.

Keep Your Lawn Free From Disease - 10% Off Select Fungicides - SHOP NOW >>

Bora-Care - Questions & Answers

Learn more about Bora-Care

Ask a Question
Bora-Care
$91.27

Free Shipping

Info / Buy Now

Displaying 321 to 340 (of 788 questions)
Sort:
  • Asked by Cate from Abiquiu, Nm
    06/27/2019
    Q
    How to clean Bora-care that dripped down painted side walls?
    A

    If Boracare overspray got onto any finished surfaces, then you should be able to clean those areas with warm, soapy water to remove any residue. I

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Bryan from Palm Bay
    07/10/2019
    Q
    Can I use a pressure washer to apply Boracare?
    A

    Bora-Care must be painted or sprayed with a sprayer directly on the wood you need to treat.  It cannot be applied with a pressure washer.  

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Brandon from Daytona Beach, Fl
    08/20/2019
    Q
    I am treating a newly constructed residential home with Bora-Care. My question is: If there are 2 x 8 studs throughout the home how much more Boracare would I use? I am using a 1 to 1 ratio.
    A

    For prevention Bora-Care would be applied at the 5:1 ratio.  There is a chart here that can help determine how much is needed.  For 2x8 a 1:1 ratio will cover 308 lineal feet so at the 5:1 it would be 5 times that.  For new homes you typically only apply 2 feet up from ground.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Jonathan from Corte Madera, Ca
    08/31/2019
    Q
    Can Thompsons Water Seal be applied over Bora-Care?
    A

    Yes.  Once Boracare is applied, it is recommended that you wait at least three days for the product to dry and soak through the entire piece of wood and then seal.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Denise from Henrico
    09/07/2019
    Q
    My new installation stained oak floor is showing signs of wood boring beetles. Will Bora Care work?
    A

    You cannot apply Boracare to wood floors that are stained, sealed, or painted. The floor would have to be raw wood for you to apply Boracare. You can carefully spot treat existing holes using Jecta, which is a ready-to-use version of Boracare.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Lamar from Athens Ga
    01/07/2020
    Q
    I treated approximately 400 salvaged old growth pine boards, some infested some not. Sprayed all four sides.
    I treated approximately 400-500 salvaged old growth pine 2x6 boards, some infested some not.Using 7 gallons mixed 1/1, sprayed all four sides. now it is all covered with white crystals. I have wiped some of the boards down with water but the crystals return after week or so. These boards were to be used as interior walls. How do I keep this crystallization from reoccurring?
    A

    There are a few things that could cause Boracare to leave residue once the application has dried. One possibility is that the solution was not mixed completely before it was applied. Boracare is best mixed in a separate container such as a 5 gallon bucket and using an impeller-type mixer such as one you would use to mix paint. If Boracare is applied very heavily (to the point of runoff), then there can be excess product which the wood cannot absorb, and that could dry in a whitish finish on the surface of the wood. Next, when you have very old wood there could be little to no moisture left in the wood, and that moisture is how the Boracare penetrates through the wood. So this really would go back to just using more Boracare than the wood can absorb. Finally, if there were any kind of finish on the wood such as paint, stain, etc., then this would have to be removed completely before you could apply Boracare or other borate products.

    You can use warm soapy water and a scrub brush to remove any excess product that may leave residue on the wood.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Julia from Boston, Ma.
    01/23/2020
    Q
    Can Bora-care be used on the soil around the house?
    A

    Bora-Care cannot be applied to the soil, only to raw wood. If you are trying to treat for subterranean termites around the perimeter of your home you can use Taurus SC in the soil. Please take a few moments to view our Subterranean Termite Treatment Guide for more information on the treatment method. 

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Sam from San Francisco
    02/15/2020
    Q
    Best application method for termites in bottom of dresser using Bora-Care?
    We have dry wood termites in the base of an old dresser. It's an isolated area. Can I apply Bora-Care with a paint brush?
    A

    Yes, Bora-Care can be applied either by spraying or painting with a brush onto the unpainted/raw wood surface.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by John from Cookeville Tn
    06/01/2021
    Q
    If you did get Bora-Care on your skin, is soap and water 100% protective against harm to a person?
    A

    Bora-Care is safe to use when yes, used as directed on the product label.  It is a green product  Unless you physically drinking the solution or ingesting the treated wood they would be no harm, it is a borate based product so slight contact with skin would not be absorbed or harmful and washing off with soap and water when contact is made would be recommended and wearing safety gear to prevent contact.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Rj from Tampa Florida
    06/07/2021
    Q
    If I use only 1 gallon of water how much Bora-Care do I use?
    A

    If you are treating for an active infestation, you will use 1 gallon of Bora-Care to 1 gallon of water. For prevention, 1 gallon of Bora-Care to 5 gallons of water. 

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Robert
    06/11/2010
    Q
    Can I use Boracare on logs that have already been stained?
    I have a 9 year old Douglas Fir log home near Albany, NY and started noticing small flying insects boring many small round holes on all sides of the house. The logs have only been stained and not UV or water repellent treated yet so I'm hoping Boracare can be spayed now to soak in past the stain and then once dried I'll apply a special log wood sealant...
    A
    Unfortunately BoraCare will not penetrate through stain either.  You would have to sand the surface stain off of the wood, pressure wash it off, or drill holes into the infested area and inject Bora-Care into the center of the wood.  Those would be the only options. 
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Murdock
    10/08/2010
    Q
    Does Bora-Care have any effect on 3m 5200 caulk's holding power?
    A
    Bora-Care should have no effects on caulking as long as you allow plenty of time for the Bora-Care to dry thoroughly before applying the caulk which is usually 24 hours.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Sarah
    12/28/2010
    Q
    What can I do about applying Bora-Care on wood floors that have a stain and old finish on them?
    I noticed in my dining room, I seem to have some type of little bug holes and lines in the wood. I sanded this floor, and I have not put any stain or finish on it. Will these bugs get into other places, and what if the other floors are stained?
    A
    Bora-Care is the preferred choice for old house borers and powder post beetles which is probably what you have.  Bora-Care can only be used on raw, untreated, unsealed wood. If you are trying to treat wood that is already stained or sealed, you either have to sand the finish off completely like you have done on some of the other wood, or your only other option is to drill holes in the areas that you see damaged and inject the Bora-Care directly into the wood; bypassing the stained layer.
    Was this answer helpful to you?   Yes No
    2 of 3 people found this answer helpful.
  • Asked by Susan
    03/19/2011
    Q
    Can Bora-Care be used on painted furniture?
    A
    No. Bora-Care can only be used on unfinished or stripped furniture.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Ralph
    06/25/2011
    Q
    I have a tree house with an old dead log as its base. Can I use Bora-Care to treat this log?
    Also, it has been stained, but I believe that the log will still absorb the Bora-Care, as it has a lot of cracks in the log. Do you think Bora-Care will provide any protection for this type of application? The log is 4 feet deep by 8 feet wide by 7 feet tall. It sits on a raised concrete slab. Also, this is a structure for children. Do you think is is safe to use it on the tree. Also, it is outside and will be exposed to the weather, but does sit under the tree house.
    A
    You can use Bora-Care for this application and it will protect this log against any future damage.  However, it is meant only for raw wood, and although there are cracks in the log if you sanded off the stain somehow you would get much better coverage and therefore better protection.  Since it is outside, you should seal the log after applying Bora-Care.  This will allow the product to last longer outside.  If an exterior piece of wood is exposed to weather over the years, water can force the Bora-Care out if it is not properly sealed.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Bob from Huntington Beach, Ca
    10/10/2011
    Q
    I live in Southern California near the ocean. I have termites in my wood fence.
    How long will BoraCare last when exposed to the elements of Southern California coastal area? If the rain washes away the treatment, can it be reapplied during our dry season?
    A
    Bora-Care is great for the termite issue in your fence, but when applied outside it is very important to seal the treatment by using a sealant material, like a Thompsons water seal.  Bora-Care can only be applied to raw wood and after it is applied to wood outdoors it must be sealed.  However, you could apply it each year if you wanted to, but it is not necessary if you seal it.
    Was this answer helpful to you?   Yes No
    2 of 3 people found this answer helpful.
  • Asked by Ryan from Pa
    11/03/2011
    Q
    Why is the BoraCare treated wood still sticky? Should I be concerned about insulating in these areas?
    I treated the wood along the sill beam, subfloor, joists, etc. in my basement 6 days ago. I have had a fan running in the area to promote drying, yet the wood still seems to be sticky/wet. I am assuming that at this point this is not really water, more likely part of the penetrating agents? I need to replace the fiberglass batt insulation, is this likely to cause mold, problems, etc.? Any other thoughts to reduce the drying time? Would simply wiping down the wood at this point with a wet rag and then allowing another few hours dry time be sufficient? I did follow the mixing directions closely, including mixing with a drill and hot water for quite some time. I applied with the 2 gal Chapin sprayer waited 30 minutes and reapplied.
    A
    Bora-Care should not be taking that long to dry.  Typically it only takes 24 hours.  Usually when this is the case, it means that too much was applied to the wood.  This may or may not be the case.  We would like you to call the manufacturer, Nisus, as they are the true experts on their own product and can better troubleshoot your situation.  You can reach them at:  Nisus: 800.264.0870
    Was this answer helpful to you?   Yes No
    2 of 5 people found this answer helpful.
  • Asked by Smith from Los Angeles, Ca
    11/16/2011
    Q
    Is Boracare compatible with linseed oil and turpentine?
    I would like to treat exterior windows and trim that have dry rot and termite damage. Can I apply Boracare to bare/stripped wood and then follow up with a linseed oil/turpentine mixture, then oil primer then aklyd paint? Will there be any compatibility issues? Can Boracare be directly mixed into the linseed/turpentine solution and applied as one solution?
    A
    We recommend that you contact Nisus, the manufacturer of Boracare, as they are the experts on their own product and they may have the specific information you are seeking. You can reach Nisus by calling 800-264-0870.
    Was this answer helpful to you?   Yes No
    2 of 5 people found this answer helpful.
  • Asked by Gerald from Dayton, Va
    08/23/2012
    Q
    What should I use to treat for powder post beetles on a lumber stack?
    I have several thousand board feet of hardwood (Oak, Hickory and Maple) on lumber stacks that have post powder beetles in them. This lumber has been air drying on strips for over two years at this point. I would like to treat with Boracare and restack not using the strips if possible. What are my best options for getting rid of the beetles and protecting the lumber at the same time? Can I simply lay out a layer of lumber and spray it a Boracare solution and immediately stack on the next layer and spray as I transfer from the strips to a dead stack? Also how much Boracare should I order per 1000 board feet? Thanks for your help.
    A
    Bora-Care would definitely be what you want to use.  You can lay the boards out, spray or paint on the Bora-Care solution, flip the board and treat the other side, and then stack it.  Should not be an issue.  How for the bora-care goes depends on the thickness of the wood.  Please see page 10 of the bora-care label.  Table A on page 10 will tell you how many lineal feet of board the bora-care will treat based on thickness. The table tells you how many lineal feet a DILUTED gallon will treat.  Since you mix Bora-Care 1 gallon to 1 gallon of water which makes 2 gallons of diluted solution, you will double the figure shown.  For instance, it says if you have 2 x 4 wood it will treat 600 lineal feet.  You will double this amount so you will be able to treat 1200 lineal feet of 2 x 4.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Vanessa from Brunswick Georgia
    04/29/2013
    Q
    What is the best termiticide to treat termites in the studs of the house?
    A
    First identify them as either Subterranean or drywood termites. If drywood termites Boracare is usually chosen if you need to protect the wood for long term control of wood infesting pests. Boracare penetrates into untreated wood and will eliminate current infestations of termites and it will prevent infestations of termites, carpenter ants, powderpost beetles and wood destroying fungus when used as directed on the Product Label. If Sub-termites you may want to use a termite foam such as Termidor Foam.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
Displaying 321 to 340 (of 788 questions)