As with most herbicides the exact volume of water is not very important, you just need to be sure you are getting the correct amount of product on a specific area. Celsius WG Herbicide may be applied at three different rates depending on the weeds to be controlled. For the appropriate rate and species consult USE RATES FOR WEED CONTROL section on the Celsius product label. For spot applications, add the specified product rate of 0.057-0.113 oz (1.6-3.2g) to enough water to create approximately 1 gallon spray solution. One gallon of spray solution will treat up to 1,000 sq ft. For maximum weed control with broadcast applications, add non-ionic surfactant.
Yes, Celsius WG Herbicide can be used now if the dollarweed is actively growing. This is safe for use in centipedegrass and will not harm it.
Celsius WG Herbicide can be tank mixed with other herbicides. You will want to check the label of the MSM product that you plan to use to see if it allows for tank mixing as well. It is also recommended to do a tank mix test before applying to be sure that there is no clumping.
Celsius WG Herbicide and Dismiss Herbicide can be mixed together following the instructions on each product label. Both do recommend a compatibility test if you have not done so previously.
Celsius WG Herbicide is mixed with water and applied in a hand pump or backpack sprayer. The exact rate will depend on what type(s) of weeds you are treating for. We recommend that you add 1/2 gallon of water and the amount of product and agitate first then add remaining 1/2 gallon prior to application.
To see if you can mix Celsius WG and Atrazine together you need to test prior to mixing in the tank. Please follow these instructions on the label of the Celsius WG. Compatibility If this product is to be tank-mixed with other products, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop (precipitation, settling, changes in color), do not use this mixture for spraying. Indications of incompatibility may occur within 5-15 minutes after mixing. Read and follow the label of each tank mix product used for precautionary statements, directions for use, geographic and other restrictions.
You should wait a minimum of 24 hrs after Celsius WG Herbicide application to irrigate the area.
As long as the insecticide mixes well with the Celsius WG Herbicide in the tank, you can apply at the same time.
Celsius WG Herbicide is labeled to control carpetgrass when mixed at 0.085 oz (2.4 g) of product per 1,000 sq ft . Please reveiew the product label for complete application instructions.
Celsius WG Herbicide is labeled to treat field sandbur.
Celsius WG Herbicide is safe for established turf including Bermuda and is labeled for eradicating field sandbur. It will be applied at 0.085 oz (2.4 g) of product per 1,000 sq ft per 1-2 gallons of water.
Celsius WG is a water-soluble granule. You will need to agitate the tank while diluting to be sure the solution is uniform, per the product label.
Celsius WG Herbicide is for use on warm season turf like zoysia only, but it cannot be used on fescue.
Pets can return to an area that has been treated with Celsius WG as soon as everything is dry (usually a couple of hours).