CSI 4-4 Mosquito, Fly & Gnat Control Help - Questions and Answers

CSI 4-4 Mosquito, Fly & Gnat Control

Customer Q&A

CSI 4-4 Mosquito, Fly & Gnat Control

(6)

Free Shipping

Info / Buy Now

Ask Question

Asked by Ron

07/10/2011

Q

What is the best oil based insecticide to use in a thermal fogger when treating mosquitoes?
I bought a thermal fogger to help with the mosquito problem where I live in south Florida. It's a little confusing as to what to use in it to effectively control my mosquito population. What's a carrier oil? Do you add an insecticide concentrate to it? Should I use a premixed insecticide? Help?!

A

You should use a product like our popular CSI 4-4 Mosquito, Fly & Gnat Control. It can be applied as is with no mixing of any other product. It is oil based, so you can pour it directly into your thermal fogger and apply it right away and it is labeled for mosquitoes.

Was this answer helpful to you? Yes No

28 of 36 people found this answer helpful.
Asked by Donald from Mcgehee Arkansas

07/26/2016

Q

What's the ratio mix with mineral oil for CSI 4-4 Mosquito, Fly & Gnat Control?

A

When using CSI 4-4 Mosquito, Fly & Gnat Control you mix it one part product with 2 parts mineral oil. Please let us know if we can be of any more assistance.

Was this answer helpful to you? Yes No

4 of 6 people found this answer helpful.
Asked by Billy from Colt Ar 72326

07/15/2014

Q

I have a Blackflag propane fogger. Do u have an effective mosquito fog that will work in this device.
My mosquitoes drink the blackflag product. I need something lethal!

A

Our 4-4 Mosquito, Fly & Gnat Control can be used in propane foggers and will do a good job of killing mosquitoes in the area during application.

Was this answer helpful to you? Yes No

3 of 4 people found this answer helpful.
Asked by Robert from Magnolia

10/04/2016

Q

What insecticide would you recommend to use with the BY100 Thermal Fogger to kill mosquitos?

A

CSI 4-4 Mosquito, Fly & Gnat Control is a great product that kills all of the common flying pests, including mosquitoes. To apply, just mix the concentrate with mineral oil or use it undiluted, then put it into a thermal fogger.

Was this answer helpful to you? Yes No

2 of 5 people found this answer helpful.
Asked by Amber from Harvey, Nd

11/15/2017

Q

Will CSI 4 - 4 Mosquito, Fly & Gnat Control have any effect on birds?

A

CSI 4 - 4 Mosquito, Fly & Gnat Control will not harm birds if used as directed on the product label.

Was this answer helpful to you? Yes No

2 of 3 people found this answer helpful.
Asked by Ben from Lisbon

06/09/2019

Q

Does CSI 4-4 Mosquito, Fly & Gnat Control have a residual ?
Or is it more of a contact product? Thanks

A

CSI 4-4 Mosquito, Fly & Gnat Control is a contact kill only and has no residual.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Thomas from Middleton, Wi

05/23/2016

Q

How long between applications of CSI 4-4 for effective mosquito control?

A

Per the product label for CSI 4 - 4 Mosquito, Fly & Gnat Control: Apply at a rate not to exceed 0.007 pounds of permethrin per acre in any given 24 hour period. Do not retreat a site more than once in 3 days. Do not exceed 25 applications at 0.007 pounds of permethrin per acre (not to exceed a tota…
Read Full Answer »
Per the product label for CSI 4 - 4 Mosquito, Fly & Gnat Control: Apply at a rate not to exceed 0.007 pounds of permethrin per acre in any given 24 hour period. Do not retreat a site more than once in 3 days. Do not exceed 25 applications at 0.007 pounds of permethrin per acre (not to exceed a total of 0.18 pounds of permethrin per acre) in any given season. So you should wait at least 3 days between treatments and not exceed the max rate per acre in any season.

Was this answer helpful to you? Yes No

1 of 2 people found this answer helpful.
Asked by Robert from Edisto Island

05/04/2019

Q

Does CSI 4-4 Mosquito, Fly & Gnat Control kill sand gnats?

A

CSI 4-4 Mosquito, Fly & Gnat Control is labeled for gnats in general and can kill those out in the open at the time of application.

Was this answer helpful to you? Yes No

1 of 2 people found this answer helpful.
Asked by Dan from York, Me

04/12/2016

Q

What is the dilution rate for CSI 4-4?
I was wondering about dilution for CSI 4-4. The description says to dilute with water, but the manufacturer says to use mineral oil. Is mineral oil ok for use in a Stihl SR450? Can you use mineral oil from a hardware store? What dilution ratio would you recommend for black Flies? Thanks!

A

CSI 4-4 would be used undiluted or diluted with mineral oil per the product label. We have updated the error on the site. You can use mineral oil at local stores. We do not carry any Stihl equipment so are not familar with the model you have. Instructions and rates vary depending on if you are u…
Read Full Answer »
CSI 4-4 would be used undiluted or diluted with mineral oil per the product label. We have updated the error on the site. You can use mineral oil at local stores. We do not carry any Stihl equipment so are not familar with the model you have. Instructions and rates vary depending on if you are using a thermal fogger or non-thermal ULV, motorized, portable, backpack, handheld or truck-mounted fogging equipment/mist blower as well as the wind speed in the area. Please refer to pages 3-4 of the label for a complete breakdown.

Was this answer helpful to you? Yes No

0 of 1 people found this answer helpful.
Asked by Edward from Renova

08/07/2018

Q

Is 4-4 Mosquito, Fly & Gnat Control safe to use in a 2 gallon pump sprayer? What's the mix ratio in trying to control flies?

A

No, 4-4 Mosquito, Fly & Gnat Control cannot be applied using a hand pump sprayer, it is only labeled to be applied via ULV NonThermal Foggers (cold fog), Thermal Aerosol Fogging equipment, Aerail Applications or Mist Blower. We would suggest Vector-Ban Plus that contains 10% Permethrin and 10…
Read Full Answer »
No, 4-4 Mosquito, Fly & Gnat Control cannot be applied using a hand pump sprayer, it is only labeled to be applied via ULV NonThermal Foggers (cold fog), Thermal Aerosol Fogging equipment, Aerail Applications or Mist Blower. We would suggest Vector-Ban Plus that contains 10% Permethrin and 10% PBO as an alternative that can be used in automatic misting systems, outdoor band applications, indoor applications, crack & crevice, ULV & space spray, and on listed animals. Vector-Ban Plus controls mosquitoes that transmit the West Nile Virus, Flies, Gnats, Wasps, Fleas, Cockroaches, Bed Bugs, Spiders and many more nuisance insects. The mix rate for severe infestations is 6.4 fl oz per gallon of water & for maintenance applications, mix 3.2 fl oz per gallon of water.

Was this answer helpful to you? Yes No

0 of 1 people found this answer helpful.
Asked by Lawanda from Charleston

12/01/2018

Q

Will CSI 4-4 Mosquito, Fly & Gnat Control kill roaches?

A

CSI 4-4 Mosquito, Fly & Gnat Control is not labeled for roaches.  Foggers generally are used as a flushing treatment and do not leave a long residual. If battling roaches, we recommend using one of our Roach Control Kits. Roaches are a persistent pest and require multiple treatments using a com…
Read Full Answer »
CSI 4-4 Mosquito, Fly & Gnat Control is not labeled for roaches.  Foggers generally are used as a flushing treatment and do not leave a long residual. If battling roaches, we recommend using one of our Roach Control Kits. Roaches are a persistent pest and require multiple treatments using a combination of products in order to be completely eradicated. Please see our Roach Control Guide for step by step instructions on how to do a full treatment.

Was this answer helpful to you?   Yes No

0 of 1 people found this answer helpful.
Asked by S from Il

06/24/2019

Q

How much CSI 4-4 Mosquito, Fly & Gnat Control do I dilute in a backpack sprayer and what will be the coverage?

A

CSI 4-4 Mosquito, Fly & Gnat Control cannot be applied using a hand pump sprayer/backpack sprayer, it is only labeled to be applied via ULV NonThermal Foggers (cold fog), Thermal Aerosol Fogging equipment, Aerail Applications or Mist Blower.

Was this answer helpful to you? Yes No
Asked by Richard from Miami Fl.

07/07/2019

Q

Where do I get mineral oil to use with CSI 4-4 Mosquito, Fly & Gnat Control? Will it harm fish and pets?

A

CSI 4-4 can be used undiluted or diluted with mineral oil per the product label. You can use mineral oil at local stores. The label also states this pesticide is extremely toxic to aquatic organisms, including fish and aquatic invertebrates. When this product is used according to the product labe…
Read Full Answer »
CSI 4-4 can be used undiluted or diluted with mineral oil per the product label. You can use mineral oil at local stores. The label also states this pesticide is extremely toxic to aquatic organisms, including fish and aquatic invertebrates. When this product is used according to the product label it is not harmful to pets.

Was this answer helpful to you? Yes No
Asked by Kevin from Riverside, Ca.

02/17/2021

Q

How long after applying CSI 4-4 can we use the backyard?
Should I try a 3-1 ratio to get started and adjust from there!

A

Depending on the application method,CSI-4 may be applied either diluted or undiluted. You would want to keep people and pets out of the area until the product has completely dried typically after 4-6 hours. Please see the label for complete application instructions.

Was this answer helpful to you? Yes No
Asked by B from Albemarle, Nc

05/20/2021

Q

Is it safe to use CSI 4-4 Mosquito, Fly & Gnat Control in pastures where goats eat?

A

CSI 4-4 Mosquito, Fly & Gnat Control is not labeled for use in any livestock or grazing areas and would not be recommended for use where goats eat. You may consider Naprovit PRO Plus if you need a product for mosquito control or misting systems around livestock or pastures.

Was this answer helpful to you? Yes No