We would recommend contacting the manufacturer of Demand CS directly to see if it would be advisable to plant anything in the area that was treated, or the best method to remove the product from the soil, if possible. You can reach Syngenta at 866-796-4368.
One gallon of finished solution should treat approx. 1,000 sq ft when treating with Demand CS.
Demand CS should kill Yellow Jackets after they come in contact with it, however it is not specifically labeled for them. This would not be our number one recommendation for Yellow Jackets because it can take some time to kill them. Please check out our article "How to Get Rid of…
Read Full Answer »How long it will take to dry will depend entirely on how heavily you sprayed the product and how well the air circulation in the home is. It could take 30 minutes up to 2 hours for a full dry time so keeping the people out of the home for at least 2 hours should be sufficient.
Yes, Demand Cs will treat black widow. Your mixing ratio would be 24mL per gallon of water. After spraying, Demand CS leaves thousands of micro particles that bind to the surface offering long-term protection and fast insect knock-down.
There is no valid reason to mix Transport Mikron and Demand CS together, it would not make either product work better or produce better results, though it could make treated areas repellent to insects which lessening the effectiveness of the treatment. You should choose one product, read the product…
Read Full Answer »Yes, Demand CS is applied to lawns at the rate of 7ml per 1,000 sq ft. Treatments for chiggers should begin in May and could need to continue through the summer as new chiggers move into the area. Treating the entire lawn is of little benefit because chiggers avoid direct sunlight and normally wi…
Read Full Answer »Demand CS should be mixed at 6-12 ml per one gallon of water per 1,000 sq ft per the product label, which is 3-6 mL or 0.1 – 0.4 oz per half gallon of water.
Yes, you can use Demand SC even though you have already sprayed, although you would want to wait 7 days between treatments. Stink Bugs will try to emerge in the spring and common places that people find stinks bugs are in the window sills and this is a great place to treat along with the baseboards,…
Read Full Answer »You should use within 24 hours of mixing for best results. Â Demand SC starts to break down pretty quickly once mixed with water.
Biting midges do generally not enter structures, but midges are small enough to get through 16 mesh screens. Getting mesh screens with a higher number can keep these and other very tiny insects out of your home. Our experts recommend using a pyrethrin spray such as 565 Plus or Microcare to get ri…
Read Full Answer »It would be best to make the Demand CS application when temperatures are above freezing. This way, the residual does not break down as quickly as when temps are below freezing.
Demand CS is a water-based insecticide and should not cause damage to any surface that water would not damage.
As long as it is not freezing outside you can safely use Demand CS outdoors. Since the product is water based trying apply it in below freezing temperatures would not yield positive results.
It is highly recommended to apply mixed solution of Demand CS within 24 hours of mixing. This will make sure you are applying the freshest and most effective mixture.
If back spray or drift for a Demand CS application were to get on any edibles, fruits or vegetables, they would need to be discarded and not consumed.Â
Demand CS is safe for animals if applied according to the instructions on the product label. Animals need to be kept out of the area while the product is being applied. They can return once the product has completely dried.Â
When used as directed on the product label, Demand CS is safe to use outdoors in areas where birds frequent. Be sure the birds are out of the area when the Demand is being applied and try to keep the birds away until the area is dry.
Bed Bugs have shown resistance to Suspend SC. Demand CS is microencapsulated and will have a longer residual. It takes more than one product to treat for Bed bugs and this is why we recommend using one of our Bed Bug Kits.
At the highest usage rate you will use .8 fl oz of Demand CS per gallon of water to cover a 1,000 sq ft area so each quart of Demand CS will make 40 finished gallons of solution which will treat 40,000 sq ft.