Yes, Quali-Pro Dithiopyr 40 WSB does need to be watered in in order to activate the active ingredient.
How much Dithiopyr 40 WSB you use depends on the program you going to use but the amount is not easily measured out for smaller areas since it is in premeasured pouches. The max rate on the label states: Do not apply more than 0.5 lb ai/ acre per application or more than 1.5 lb ai/acre per year using split or sequential applications.
A better option if you have less than an acre to treat would be the liquid version Dimension 2EW. You will use .33 - .73 of an ounce of Dimension 2EW per 1,000 sq ft. The exact usage rate will depend on your location and the application program you choose. Please refer to pages 4-6 of the product label to find the exact usage rate for your needs.
Dithiopyr 40 WSB and 2, 4 D can be mixed and applied together as long as they mix well in the tank. Be sure to apply during the cooler times of the day.
Per the product label for Dithiopyr 40 WSB, when using as a post emergent tank mix for crabgrass: Improved control may be seen by the addition of a nonionic surfactant. The rate will vary depending on the type of grass you have and program you are using. Water is just the carrier so the amount of water you use is dependent on how much it takes to cover the treated area and is not set but you should a minimum of one gallon of water per 1000 sq ft.
Dithiopyr 40 WSB has a shelf life of 3-5 years from the date of purchase if stored at room temperature.
Any mixed Dithiopyr 40 WSB should be used within 24 hours.
The Dithiopyr 40 SWB must be used in a tank sprayer as these are water-soluble sachets that are typically diluted and dispersed into 25 gallons of water at at time. It would not work in a hose-end sprayer. We highly suggest going with a liquid formulation of pre emergent if you are looking to use a hose end sprayer to treat your yard.
Dimension 2EW Herbicide (each 1/2 gallon jug will treat up to roughly 3 acres):
http://www.domyownpestcontrol.com/dimension-2ew-herbicide-p-1494.html
Dithiopyr 40 WSB is only labeled to be used in non-crop areas, so nothing edible can be planted in the area where it was applied within 1 year of application.
Without knowing exactly what nutrients your lawn needs, it can be difficult to recommend fertilizers. Keep in mind that liquid fertilizers are often applied at either very high rates or designed to be used frequently. Turfgrass Pro 28-0-0 would be used weekly or bi-weekly through the growing season at a rate of 6-12 oz per 1,000 sq ft per application. If you are needing a more complete fertilizer, then Ferti-Lome Lawn Food Plus Iron 24-0-4 also contains iron and micronutrients (this is a granule fertilizer). You can browse all our lawn fertilizers here. Keep in mind that Dithiopyr 40 WSB contains water-soluble packets which are each 5 oz, so for use in TX, 1 x 5 oz pouch covers 14,250 square feet. A better choice for you may be either Dimension 2EW (liquid concentrate) or Hi-Yield Weed and Grass Stopper with Dimension (granule).
Per the Dithiopyr 40 WSB product label: Preemergence applications totaling more than 0.5 lb ai/acre (greater than 1.25 lb/acre of Quali-Pro Dithiopyr 40 WSB) must be applied as a split application made at 5- to 10-week intervals. A maximum of 0.5 lb ai/acre (1.25 lb of Quali-Pro Dithiopyr 40 WSB) per application is allowed for early postemergence control.
Dithiopyr 40 WSB is labeled for pre-emergent control sandbur and many other broadleaf and grassy weeds. The application rate is 0.46 oz per 1000 sq ft.
If you do not know the total square footage of the lawn, measure off the area to determine how many sq ft you have and then determine how much water is needed to thoroughly and evenly cover the area to be treated. To determine how many sq ft the 15 gallon sprayer will cover, we recommend doing a mock application where you will fill the tank with plain water, and treat the lawn area just as you would to apply the Dithiopyr 40 WSB. Since water is the carrier, there is no set amount but typically 1 gallon of water per 1000 sq ft is standard.
For protective wear, the product label recommends applicators wear: Long-sleeved shirt and long pants, chemical-resistant gloves made of any waterproof material and shoes plus socks.
Dithiopyr 40 WSB cannot be used in a hose end sprayer, per the product label - Use calibrated sprayers to apply Quali-Pro Dithiopyr 40 WSB in order to ensure an accurate, uniform spray distribution.
View our selection of Hand Pump Sprayers and Backpack Sprayers for sprayer options.
Yes, you can wait 24 hours before activating Dithiopyr 40 SWB. Just be sure to activate the product with irrigation/watering before your target weeds germinte since the product it not effective until it is down in the soil.
Dithiopyr 40 WSB is not labeled for wild onion or wild celery. These weeds are mostly controlle used post emergent herbicides after they have emerged.
Per Dithiopyr 40 WSB label: to ensure establishment of desirable turfgrasses, wait 10 weeks after a single application of Quali-Pro Dithiopyr 40 WSB, or 4 months after a split application program totaling more than 0.46 oz./1000 sq. ft. (1.25 lb./acre) before reseeding, overseeding, or sprigging of treated areas. EXCEPTIONS: In cases where slight injury to perennial ryegrass can be tolerated, overseeding of bermudagrass with perennial ryegrass may be carried out as early as 6 weeks after application. To prevent injury to perennial ryegrass, overseed bermudagrass 8 weeks after the Quali-Pro Dithiopyr 40 WSB application.
How much Dithiopyr 40 WSB you use depends on the program you going to use but the amount is not easily measured out for smaller areas since it is in premeasured pouches. The max rate on the label states: Do not apply more than 0.5 lb ai/ acre per application or more than 1.5 lb ai/acre per year using split or sequential applications.
A better option if you have less than an acre to treat would be the liquid version Dimension 2EW. You will use .33 - .73 of an ounce of Dimension 2EW per 1,000 sq ft. The exact usage rate will depend on your location and the application program you choose. Please refer to pages 4-6 of the product label to find the exact usage rate for your needs.
How much Dithiopyr 40 WSB you use depends on the program you are going to use, however the amount is not easily measured out for smaller areas since it is in premeasured pouches. The max rate on the label states: Do not apply more than 0.5 lb ai/acre per application or more than 1.5 lb ai/acre per year using split or sequential applications. A better option if you have less than an acre to treat would be the liquid version, Dimension 2E. You will use 0.33 – 0.73 of an ounce of Dimension 2EW per 1,000 sq ft. The exact usage rate will depend on your location and the application program you choose. Please refer to pages 4-6 of the product label to find the exact usage rate for your needs.
How much Dithiopyr 40 WSB you use depends on the program you going to use but the amount is not easily measured out for smaller areas since it is in premeasured pouches. The max rate on the label states: Do not apply more than 0.5 lb ai/ acre per application or more than 1.5 lb ai/acre per year using split or sequential applications.
A better option if you have less than an acre to treat would be the liquid version Dimension 2EW. You will use .33 - .73 of an ounce of Dimension 2EW per 1,000 sq ft. The exact usage rate will depend on your location and the application program you choose. Please refer to pages 4-6 of the product label to find the exact usage rate for your needs.
