For use on ornamental evergreen trees and shrubs such as hemlock, fir, spruce, cypress, white pine, Scotch pine, American holly, Southern magnolia, Western cedar, and juniper
Water the plant or tree well prior to application.
Using a hammer and the plastic driving cap, drive spikes even with the soil’s surface.
Remove the cap and continue hammering spike at least two more inches below the surface. Spikes should be evenly spaced in a circle along the tree’s dripline.
Never insert spikes closer than 30 inches from the tree trunk.
For best results, apply in early spring and late fall.
Confused about the total number of spikes in Jobe's Evergreen Tree Fertilizer Spikes?
A
Jobe's Evergreen Tree Fertilizer Spikes comes in a box of 15 spikes. How many you use depends on the trunk diameter or shrub height. Measure trunk diameter one foot above ground level. For…
Jobe's Evergreen Tree Fertilizer Spikes comes in a box of 15 spikes. How many you use depends on the trunk diameter or shrub height. Measure trunk diameter one foot above ground level. For shrubs, use one spike per three feet of height. Refer to the product label for the number of spikes to use.
Q
How should Jobe's Evergreen Tree Fertilizer Spikes be placed?