HOW TO APPLY
Determine the area of lawn you want to treat by measuring the width and length in feet. Multiply the width by the length to determine the area in square feet. For areas less than 2,500 square feet, only one ampule (0.06 fl. oz) (1.8 ml) is needed. For areas greater than 2,500 square feet, two ampules (0.12 fl. oz) (3.6 ml) will be needed for proper treatment.

Lawn size = Width x Length

2,500 sq. ft = 50 feet x 50 feet

5,000 sq. ft = 100 feet x 50 feet

Ampule Opening Instructions

• Separate ampules by cutting or bending and breaking apart.
• Hold ampule carefully and bend top back to open.
• Squeeze entire contents of ampule into sprayer.

Adjustable Rate Hose-End Sprayer

TopShot Weed Killer for Lawns can be used in adjustable rate ready-to-spray hose-end sprayers that have at least a 16 ounce capacity. For proper coverage, apply enough product through the sprayer to wet the top of the lawn. Do not over-saturate, or attempt to water the roots of the weeds. Simply wet the top of the lawn, and let TopShot Weed Killer for Lawns do the work. When connecting any chemical dispensing device to your home water supply make sure that the sprayer has a built in back flow preventer or make sure there is a back flow preventer on your faucet.

Mixing Instructions

1. Make sure water faucet to garden hose is off.
2. Attach hose-end sprayer to garden hose.
3. Adjust the metering dial to 1-1/2 ounces per gallon.
4. Remove bottle from hose-end nozzle apparatus.
5. Squeeze the entire contents of one ampule (1.8mL) of TopShot Weed Killer for Lawns into the bottle and then add 16 ounces of water.
6. Reattach bottle to hose-end sprayer nozzle apparatus.
7. Ensure the hose-end sprayer nozzle apparatus is in the “OFF” position, or if trigger activated:make sure the trigger is not pressed.
8. Shake well before spraying to ensure that the contents are well mixed.

Spraying Instructions

1. Measure off 2,500 square feet of lawn. Example: 25’ x 100’ or 50’ x 50’, approximately half the size of a basketball court.
2. Turn on water faucet to garden hose.
3. Aim hose-end sprayer at lawn and spray entire 2,500 square feet of lawn.
4. When applying, simply wet the top of the turf, and let TopShot Weed Killer for Lawns do the work.
5. It should take less than 5 minutes to treat all 2,500 square feet and use up all 16 ounces of mixture in the bottle.
6. Repeat mixing and spraying instructions to treat an additional 2,500 square feet of lawn with second ampule of TopShot Weed Killer for Lawns.

.Hose-End Sprayer Cleaning

1. Fill the jar to full capacity with clean water.
2. Spray previously treated area until bottle is empty. Do not rinse bottle and pour onto ground.

Only use sprayers dedicated to herbicide use.

Handheld Pump-Up Pressure Sprayer

If you prefer you may use a handheld pump-up pressure sprayer with a capacity of 1 to 3 gallons.

Mixing Instructions:

1. Remove the top of pump-up sprayer to allow filling.
2. Squeeze the entire contents of one ampule (1.8 mL) of TopShot Weed Killer for Lawns into the sprayer container.
3. Fill the sprayer with water to capacity.
4. Reattach the top of the pump-up sprayer to contain the contents.
5. Shake well before spraying.

Spraying Instructions

1. Measure off 2,500 square feet of lawn. Example: 25’ x 100’ or 50’ x 50’, approximately half the size of a basketball court.
2. Pump up spray to manufacturer recommended pressure.
3. Aim pump-up sprayer at lawn and spray entire 2,500 square feet of lawn.
4. When applying, simply wet the top of the turf, and let TopShot Weed Killer for Lawns do the work.
5. Repeat mixing and spraying instructions to treat an additional 2,500 square feet of lawn with second ampule of TopShot Weed Killer for Lawns.