Permethrin SFR 36.8% is not labeled for chiggers and may not provide adequate results for you. Onslaught insecticide is labeled for chiggers and can be used both indoors and outdoors as a broadcast spray. Chiggers are not known to infest structures. Chiggers are most likely outdoors in your yard. Many people are lead to believe that the infestation is indoors because they do not feel the effects of the chigger bites right away and then are lead to believe they are being bitten at a later time. If you feel strongly that you are being bitten inside by something we would urge you to get a sample of the pest and have it professionally identified by an entomologist. You can find an entomologist in your area by contacting your local cooperative extension office.
Permethrin SFR 36.8% is only labeled for fly control as a perimeter treatment or for animal quarters such as barns. A more appropriate product would be Talstar P. You should locate and eliminate the breeding source of the flies, since control will be very difficult relying on sprays. An easy and effective tool is the Flies Be Gone Fly Trap, which catches thousands of flies from up to 100 yards away. This trap is disposable and should be hung about 30 feet away from the house or other areas where you spend time. Please see our Flies Pest Guide for more information.
Yes, Permethrin SFR 36.8% is labeled for use on livestock such as horses and cattle as well as other animals. We have listed the specifications for horses below but you can find more information on the Product Label.
For use on Horses to control:Horn flies, face flies,stable flies, house flies,horse flies, black flies,eye gnats, mange mites,scabies mites, ticks, lice and fleas: Use ¼ fl. oz. to 1 pt. water, 0.6257% AI. Low pressure spray. Application: 1-2 fl. oz. spray per animal. Spot treat back, face, legs tail and ears.
Permethrin SFR can be used in animal housing areas containing swine and for use on swine. Per the product label, you would use 4 oz in 25 gallons of water to treat 50-100 head of swine, and thoroughly wet or dip animals including ears. You must allow 5 days between the last treatment and slaughter.
Permethrin SFR is not labeled for use on grazing areas. For this treatment, we would recommend Essentria All Purpose Insecticide.
You did not state in your question or other detail what you are treating for. Permethrin SFR 36.8% per the product label can be mixed with either water, diesel oil, or suitable mileral oil. For most structural pest control applications, you will dilute Permethrin SFR with water.
Permethrin SFR 36.8% can be applied to indoor cracks and crevices when the children and pets are not present. They can return once the treated areas are completely dry. Depending on the mix ratio used and how heavily you sprayed, it could be anywhere from just as the product has has had time to dry, or several hours after application before the smell of the Permethrin SFR completely goes away. If the odor is objectionable, then you may want to consider switching to a water-based insecticide, rather than an oil-based one. You may contact our Customer Service staff at 866-581-7378 M-F 9a-5p for further assistance selecting an alternative product.
Permethrin SFR 36.8% has a 30 day residual outside and a 90 day residual inside. It is safe for and pets if applied according to the instructions on the label. In the original wet state, it can irritate the skin. Pets need to be kept out of the area during application and until everything is fully dry.
You do not state exactly what type of worms you would be trying to use Permethrin SFR 36.8% to treat. This product has several pests on the label. If you happen to be speaking of things like heartworm or intestinal worms, no this product would not treat for anything like that.
Permethrin SFR 36.8% is recommended to be used when the grass is dry, however it can be used when the ground it a little wet from the rain but the wet ground will make the product take longer to dry. Please let us know if you have any other questions
Permethrin SFR will not kill maggots. For maggots, try and locate the source of the maggots and clean and eliminate the breeding site for the flies. Permethrin SFR would be applied with any standard pump sprayer across carpet after mixing with water and following the instructions on the product label.
Permethrin SFR cannot be added to house paint to other coatings or materials. Permethrin will kill termites on contact, but it is not recommend for treating or preventing termite infestations. Please see our Termite Treatment Guide for the best recommendations for this pest. If you would like to treat wood to help prevent termite infestations, the best product is Boracare. You can apply paint, stain, or sealant after a Boracare applicaiton is dry.
Talstar P is not labeled for lice. Suspend SC is labeled for lice, however, it is not labeled for use inside of chicken coops.
We would recommend using something like Permethrin SFR in the area. It is labeled for lice and mites in poultry houses. The mixing ratio is 1 2/3 fl. oz. of product per gallon of water.
The mixing rate of Permethrin SFR 36.8% for fire ants is 1 2/3 fl oz per gallon of water. For an acre, it is recommended that you use 32 fl oz in 20 gallons of water. The label recommends that you treat each mound directly and treat at least 4 feet around each mound so that the ants do not move their mounds.
You will need 1 1/3 oz. of Permethrin SFR per gallon of water when treating for roaches. Everyone should be kept out of the treated area until everything is fully dry. It is not necessary to air out the house as long as there is adequate ventilation. You may want to look over our Roach Control Guide for more information on treating and preventing roaches.
