Pur Black Foam (BF01) Help - Questions and Answers

Pur Black Foam (BF01)

Customer Q&A

Pur Black Foam (BF01)

(1)

Free Shipping

Info / Buy Now

Ask Question

Asked by Jeff

06/16/2011

Q

Do rats not chew through Pur Black Foam?
Will rats/mice burrow through? Does this foam have some sort of repellent?

A

Rats can indeed gnaw through just about any type of foam including the Pur Black Foam. In most cases however these pests seek the path of least resistance and will often just look for an opening. Holes 2 inches and smaller should be stuffed with Stuf-Fit Copper mesh and then filled in with Pur Black…
Read Full Answer »
Rats can indeed gnaw through just about any type of foam including the Pur Black Foam. In most cases however these pests seek the path of least resistance and will often just look for an opening. Holes 2 inches and smaller should be stuffed with Stuf-Fit Copper mesh and then filled in with Pur Black Foam. Larger holes need to be repaired using appropriate material such as fine mesh hardware cloth, steel plates or concrete patch.

Was this answer helpful to you? Yes No

22 of 22 people found this answer helpful.
Asked by Seth

11/30/2010

Q

Will mice chew through Pur Black Foam?
If I seal up under the siding around my concrete foundation, will the mice just chew their way in? The holes and spaces are too difficult to see to put copper wool in first, so what should I do?

A

It is possible for mice to chew their way through the foam, but it is not likely. We have never had a report from a customer that a mouse had managed to chew through the foam. That being said, we do recommend putting the Stuf-Fit Copper Mesh into the hole first and then sealing with the Pur Black Fo…
Read Full Answer »
It is possible for mice to chew their way through the foam, but it is not likely. We have never had a report from a customer that a mouse had managed to chew through the foam. That being said, we do recommend putting the Stuf-Fit Copper Mesh into the hole first and then sealing with the Pur Black Foam.

Was this answer helpful to you? Yes No

17 of 20 people found this answer helpful.
Asked by Mark from Phoenix Az

06/07/2012

Q

Will the Pur Black Foam work with the Hilti CF-DS1 gun?
I have a hilti cf-ds1 will it work with that

A

The PUR Black Foam will work great with the Hilti CF-DS1.

Was this answer helpful to you? Yes No

11 of 11 people found this answer helpful.
Asked by Christy from Wheaton, Il

11/13/2014

Q

What color is the Pur Black Foam when it dries?

A

Pur Black Foam dries black in color. Let us know if you have any more questions.

Was this answer helpful to you? Yes No

7 of 7 people found this answer helpful.
Asked by Barbara

09/27/2010

Q

Where do I purchase the gun needed to install this product, and what is the price of the gun?

A

We just added the gun for the Pur Black Foam. It is called a Pageris Foam Gun and the price is $119.99.

Was this answer helpful to you? Yes No

4 of 4 people found this answer helpful.
Asked by Cb from Albany, Vt

08/29/2016

Q

How do I determine how much Pur Black Foam and copper wire I need to exclude pests?

A

Each can of Pur Black Foam (BF01) delivers 2,800 cu. in. of foam that can produce a 1/2" diameter bead of sealant over 1,200 linear feet. The foam must be applied with a foam applicator gun. Each roll of Stuffit Copper Mesh is 6 inches wide, double folded and comes in either 20 ft. or 100 ft…
Read Full Answer »
Each can of Pur Black Foam (BF01) delivers 2,800 cu. in. of foam that can produce a 1/2" diameter bead of sealant over 1,200 linear feet. The foam must be applied with a foam applicator gun. Each roll of Stuffit Copper Mesh is 6 inches wide, double folded and comes in either 20 ft. or 100 ft. long rolls.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by Sean from Yonkers

05/31/2018

Q

Can Pur Black Foam be used around radiator pipes? Is it heat resistant?

A

Per the manufacturer, yes, Pur Black Foam (BF01) can be applied around radiator pipes. When applying this product you want to be sure the pipes are at room temperature and that you allow it to sit for a least 30 minutes after the application. While this product is not necessarily heat resistant, y…
Read Full Answer »
Per the manufacturer, yes, Pur Black Foam (BF01) can be applied around radiator pipes. When applying this product you want to be sure the pipes are at room temperature and that you allow it to sit for a least 30 minutes after the application. While this product is not necessarily heat resistant, you do not have to be concerned about the product catching fire. Temperatures would have to reach 300 degrees in order for this product to start to decompose or become brittle.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by Jesse

04/20/2015

Q

How long will the Pur Black Foam last once you have opened it?
If you leave it attached to the gun how long can it sit unused before becoming unusable.

A

Pur Black Foam will last the same as most aerosols, about 2 years from first used.

Was this answer helpful to you? Yes No

3 of 3 people found this answer helpful.
Asked by David from Windermere, Fl

01/05/2016

Q

How do you you get Pur Black Foam off of your skin?

A

If Pur Black Foam comes in contact with your skin, wipe with a dry cloth and wash immediately with soap and water.

Was this answer helpful to you? Yes No

2 of 21 people found this answer helpful.
Asked by Edward from Tampa, Fl

05/28/2017

Q

Once you insert the Pur Black Foam into the gun, can you remove and use what's left at a later date?
If you have only used say 1/2 can, I would assume that can be used at a later date and does not like become not useable?

A

Pur Black Foam (BF01) can be removed from the gun and stored for up to 2 years from the first application if properly stored

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Joy from Novato, Ca

06/21/2017

Q

Can I use Pur Black Foam (BF01) with my Great Stuff Pro 14 Dispensing Gun?

A

Unfortunately, we are not familiar with Great Stuff Pro 14 Dispensing Gun and would not able to confirm the Pur Black Foam would be compatable. We recommend contacting Pur Black Foam manufacturer Todol Products directly at 508-651-3818

Was this answer helpful to you? Yes No

2 of 4 people found this answer helpful.
Asked by Joseph from Manhattan, Ks

07/27/2017

Q

What is the best way to clean excess Pur Black Foam off vinyl siding?

A

Remove uncured Pur Black Foam with mineral spirits, paint thinner, acetone or nail polish remover, and soap and water. Cured foam can be removed by abrasion, wear, and scrubbing with soap and water.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Stephan from Stuarts Draft, Virginia

12/28/2014

Q

Can a "can" of Pur Black Foam BF01 be reused after applying it in the gun, then removing the can?

A

We need more information in order to answer your question. Are you wanting to reuse an empty can or are you wanting to know can you use some of the contents in the can and use it at a later time? Please let us know.

Was this answer helpful to you? Yes No

2 of 9 people found this answer helpful.
Asked by Joe from Spicewood

06/21/2016

Q

Does Pur Black Foam expand?

A

Yes, Pur Black Foam expands and bonds in place.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Sandy from Brooklyn

07/09/2016

Q

Does Pur Black Foam have a bitter flavoring added to it to discourage mice from chewing? If not, what makes this foam mouse resistant?

A

Pur Black Foam does not have any type of flavoring added to it. It is technically possible for mice to chew their way through the foam, but it is not likely. We have never had a report from a customer that a mouse had managed to chew through the foam. That being said, we do recommend putting the …
Read Full Answer »
Pur Black Foam does not have any type of flavoring added to it. It is technically possible for mice to chew their way through the foam, but it is not likely. We have never had a report from a customer that a mouse had managed to chew through the foam. That being said, we do recommend putting the Stuf-Fit Copper Mesh into the hole first and then sealing with the Pur Black Foam.

Was this answer helpful to you? Yes No

1 of 3 people found this answer helpful.
Asked by Andrew

08/04/2017

Q

What do you use to remove Pur Black Foam from surfaces where you do not want it?
One of my workers got Pur Black on my new work truck side. He immediately wiped it so now there is a huge smear. What can I use to get this off after drying?

A

According to the manufacturer, there is no solvent that would dissolve the Pur Black Foam without potentially damaging the paint or finish on a truck, so you should use a regular scrub brush and soapy water that you would use to clean the vehicle, and it should come off over time with scrubbing. The…
Read Full Answer »
According to the manufacturer, there is no solvent that would dissolve the Pur Black Foam without potentially damaging the paint or finish on a truck, so you should use a regular scrub brush and soapy water that you would use to clean the vehicle, and it should come off over time with scrubbing. The product will also degrade in sunlight, so it will be easier to clean over time.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Carol from Maumee,ohio

09/05/2019

Q

What do you recommend for interior garage walls at bases?
Garage is finished with drywall and baseboards but there is a 1-2 inch gap to concrete floor. Farm behind our home and preparing for winter. Increased rodent activity this summer around the outside and our garage door rubber base strip was replaced after being chewed up and all side stripping also needs replaced.

A

The best solution would be an additional baseboard or moving the boards lower so that you have a solid barrier between the baseboards and the flooring. Spaces larger then about 2" are difficult to treat with other exclusion products since this is considered a fairly large space to fill. You could us…
Read Full Answer »
The best solution would be an additional baseboard or moving the boards lower so that you have a solid barrier between the baseboards and the flooring. Spaces larger then about 2" are difficult to treat with other exclusion products since this is considered a fairly large space to fill. You could use a foam such as the Pur Black Foam to fill a long area like this, but keep in mind that you will need a foam gun to apply this product, and you may need to layer multiple beads to fill that entire space. Another option is Xcluder fabric, which is a very thick mixed material fabric that you can stuff into the space. Be sure you wear thick gloves when handling this product, such as those in this kit.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Patrick from Tyler, Tx

01/05/2021

Q

How much does the Pur Black Foam expand once applied? Looking for a very low expansion rate for small voids.

A

Pur Black Foam (BF01) delivers 2,800 cu. in. of foam that can produce a 1/2 in. bead of sealant 1,200 linear ft. long. For more specific product questions, you may wish to contact the manufacturer Todol Products directly at 508-651-3818, or via email at [email protected].

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Skyler from Salt Lake, Ut

01/28/2022

Q

Does Pur Black Foam (BF01) have the potential to freeze while still pressurized in the can and possibly attached to the foam gun?

A

It is not recommended to store or keep the Pur Black Foam (BF01) in freezing conditions or areas that will experience freezing temperatures.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Steve from Farmington Hills, Mi.

06/10/2019

Q

How do you remove Pur Black off of decking and siding?

A

Remove uncured Pur Black Foam with mineral spirits, paint thinner, acetone or nail polish remover, and soap and water. Cured foam can be removed by abrasion, wear, and scrubbing with soap and water.

Was this answer helpful to you? Yes No