Shockwave 1 Flushing Killing and Residual Aerosol is a newly launched formula from MGK that offers a great solution to your insect control problems. This liquefied aerosol insecticide spray contains a powerful combination of active ingredients which effectively kills cockroaches, as well as flushes German cockroaches, plus provide superior control of other insects such as fleas, fruit flies, stable flies, house flies, centipedes, crickets, scorpions, spiders, earwigs, silverfish, millipedes, sowbugs, pillbugs, clover mites, and more. It also contains NyGuard IGR which helps inhibit the life cycle of insects, plus provide residual control for a long-lasting solution. It is a great alternative for PT PI, PT 565, CB-80 or other aerosol product because of its excellent flushing action and dual killing agents for better synergy. It does not leak or drip even when turned upside down compared to other brands. It can be used indoors and outdoors, plus it is safe for use in food areas of food handling establishments.
DO NOT spray this product into electrical equipment or outlets.
In the home, all food/feed processing surfaces and utensils should be covered during treatment, or thoroughly washed before use. Cover or remove exposed food/feed and drinking water.
Remove pets, birds and cover fish aquariums before spraying.
This product will not stain water-safe fabrics and surfaces, however, care should be taken to test an inconspicuous area for staining prior to use.
Direct Application to food contact surfaces is prohibited.
DO NOT allow adults, children or pets to enter treated area until sprays are dry.
DO NOT allow adults, children or pets to enter until vapors, mists, and aerosols have dispersed, and the treated area has been thoroughly ventilated.
DO NOT apply this product in a way that will contact workers or other persons either directly or through drift.
DO NOT apply to plants or crops.
DO NOT treat areas when occupants are present.
DO NOT wet articles to the point of runoff or drip.
DO NOT use treated articles until spray has dried.
DO NOT allow people or pets to come in contact with treated surfaces until dry.
Outdoor applications are limited to spot treatments to exterior building surfaces.
Do not enter or allow others to enter until sprays have dried.
Do not use in aircraft cabins.
Only protected handlers may be in the area during application.
Do not make applications during rain.
Do not remain in the treated area. Exit area immediately and remain outside the treated area until aerosols, vapors, and/or mists have dispersed.
When used in dairy barns or facilities, close milk bulk lids to prevent contamination from spray and from dead or falling insects. Remove or cover milking utensils before application. Wash teats of animals before milking.
HOLD CONTAINER UPRIGHT WITH NOZZLE POINTED AWAY FROM YOU. PRESS VALVE AND SPRAY TARGET AREA OF SPACE. USE THE CONVENIENT APPLICATOR FOR CRACK AND CREVICE TREATMENT.
HOW TO USE
INDOOR APPLICATIONS: This can be used indoors as a spot, crack and crevice or space spray application.
OUTDOOR APPLICATIONS: This can only be used outdoors under eaves or as a spot treatment on the exterior of buildings.
USE IN CRACKS AND CREVICES: Use the convenient crack and crevice tool for applications. Insert the tool into cracks and crevices, holes, small openings and apply at the rate of 1 second per 3 linear feet. For wall void applications apply at the rate of 2 seconds per 1,000 cu. ft. Apply the product in a manner that adequately treats the void space.
USE AS A SPACE SPRAY: Treatments should be performed in a manner that provides adequate treatment of the space. Calculate the cu. ft. to be treated and use the rate of 2 to 5 seconds per 1,000 cu. ft. Ventilate treated areas before reoccupying.
Use Shockwave 1 as part of an IPM program. For best results, use as part of an integrated pest management program to control the targeted pest.
Effective Cockroach Application.
Flush all potential harborage areas during inspection.
Apply a labeled bait product near harborage areas identified during inspection.
Continue to monitor areas until activity has ceased.
COMMON USE SITES
FOOD AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS: Do not apply more than 1 time per day. When applying as a space spray, food operations should be shut down, all food and utensils or surfaces that might come in contact with food should be covered, removed or thoroughly cleaned if covering or removal is not possible.
FOOD AND NON-FOOD AREAS IN RESIDENTIAL HOMES: Remove or cover exposed food and drinking water before application. Remove or cover dishes, utensils, food processing equipment, and food preparation surfaces or wash them before use.
FEDERALLY INSPECTED MEAT AND POULTRY PLANTS: When using this product apply only when processing area is not in operation. Foods should be removed or disposed of if contacted by product.
HOSPITALS AND NURSING HOMES: Do not apply this product in hospital rooms while occupied. Apply according to specific directions for pest(s) to be treated. Patients should be removed from room prior to treatment. Room should be thoroughly ventilated after spraying. Do not return patients to room until after ventilation and all treated surfaces have dried.
PLANES: Do not apply in aircraft cabins.
TRANSPORTATION EQUIPMENT: Do not apply when in use. Treat walls and floors and harborage areas, when not in use.
CRAWLING INSECTS: For pests including: ants (excluding fire and carpenter), centipedes, crickets, fleas, spiders, scorpions, silverfish, millipedes, sowbugs and pillbugs. Apply as a crack and crevice treatment into cracks and crevices in all harborage areas including cabinets, meter boxes, sinks, behind and beneath refrigerators, behind baseboards and behind counter tops at the rate of 20 seconds per 100 sq. ft. When applying the product to cockroaches, harvester ants, Argentine ants, pharaoh ants, centipedes and/or scorpions, directly spray the pests.
TO FLUSH AND KILL: Crickets, earwigs, German cockroaches, boxelder bugs, silverfish, springtails, moths, Angoumois Grain Moths, carpet beetles, confused flour beetles, sawtoothed grain beetles, granary weevils, rice weevils, red flour beetles, millipedes, clover mites, foul mites, and bird mites: Apply as a spot or crack and crevice application to areas where other listed crawling pests hide and travel, such as along baseboards, corners, storage areas, closets, around water pipes, cabinets, behind and under refrigerators, furniture, sinks, furnaces and stoves, the underside of shelves, drawers and similar areas.
FLYING INSECTS: For pests including black flies, house flies, horse flies, fruit flies, stable flies, fungus gnats and moths. When applying to house flies, black flies, horse flies and stable flies, directly spray the pest to ensure efficacy. Apply as a space treatment for other listed pests. Close all windows and doors and direct fog upward at a rate of 2 to 5 seconds per 1,000 cu. ft. Disperse evenly throughout the space. Keep area closed for 15 minutes. Open and ventilate before reoccupying. Treatment may be repeated daily if necessary.
TO KILL CARPET BEETLES AND CONTROL FLEAS: Apply as a spot treatment to cracks and crevices and around baseboards, furniture, floorboards and around edges of carpet. Apply at the rate of 20 seconds per 100 sq. ft. Apply enough product to get spray coverage to the bottom of the carpet and pad where larval stages may be feeding. Spray under rugs.
TO KILL STORED PRODUCT PESTS: Apply as a crack and crevices of cabinets, countertops, pantries, food handling equipment and other harborage areas.
TO CONTROL FLEAS IN LISTED PET AREAS: Remove and either launder or destroy pet’s old bedding. To reduce infestation, thoroughly spray the animal’s clean bedding and sleeping quarters. Apply as a spot treatment to cracks and crevices furniture, and around edges of carpet. Apply at the rate of 20 seconds per 100 sq. ft. Apply enough product to get spray coverage to the bottom of the carpet and pad where larval stages may be feeding. Spray under rugs. Allow treated areas to dry thoroughly before allowing pets to re-enter. For best results, pets should be treated with an EPA registered flea control product before they return to the treated area. DO NOT TREAT PETS WITH THIS PRODUCT.
BUILDING SURFACE TREATMENTS FOR INVADING PESTS SUCH AS: Boxelder bugs, stink bugs, ants (excluding fire and carpenter), silverfish, spiders, earwigs and springtails. Spot treatments may be made on outdoor structures such as entry ways, windows, weep holes, and behind siding. Apply at the rate of 1 second per 3 linear feet. Do not apply more than 1 time per day.