-
Asked by Larry from Lincolnton, Ga09/18/2022QCan Alligare Triclopyr 3 be used around a fish pond?A
Alligare Triclopyr 3Â can be used in fish ponds when applied per the product label instructions. The label advises DO NOT treat more than one third to one half of the water area in a single operation and wait at least 10 to 14 days between treatments. Begin treatment along the shore and proceed outw…
Read Full Answer »Alligare Triclopyr 3Â can be used in fish ponds when applied per the product label instructions. The label advises DO NOT treat more than one third to one half of the water area in a single operation and wait at least 10 to 14 days between treatments. Begin treatment along the shore and proceed outwards in bands to allow fish to move into untreated areas. Consult with the State agency for fish and game before applying to public water to determine if a permit is needed. -
Asked by Steve from Reno, Nv08/05/2022QCan I use this to kill shrubs and aspen saplings that have infiltrated my lawn without killing my grass?A
Alligare Triclopyr 3 is not labeled use in grassy areas or residential areas.
-
Asked by Jacob from Lafayette, In08/23/2022QWhat rate do you mix for a 4 gal. spayer covering approximately 1000 sqf?
Main target weed is wild violet.AAccording to the product label, you would use 3 to 4 pints per acre. After calculating that down per 1000 sq ft, at the highest rate, you may use 1.47 oz per 1000 sq ft when treating wild violet. Please be sure to review the product label of Alligare Triclopyr 3 for more information and complete app…
Read Full Answer »According to the product label, you would use 3 to 4 pints per acre. After calculating that down per 1000 sq ft, at the highest rate, you may use 1.47 oz per 1000 sq ft when treating wild violet. Please be sure to review the product label of Alligare Triclopyr 3 for more information and complete application instructions.