We recommend contacting your local waste management facility for instructions on where to take Alpine WSG waste in your area.
After the Alpine WSG applicaton has been mixed with water, sprayed and allowed to completely dry in the area behind the baseboard heater, this application should not pose any risk when the water pipes heat up. For further questions or concerns, please reach out to the manufacturer BASF directly for more information. BASF can be reached at 800-777-8570.
Alpine WSG and Cy-kick CS should not be tank mixed together as the Cy Kick CS will counteract the non repellency of the Dinotefuran actve ingrdient.
If the stink bugs and spiders are your primary concern, we recommend using the 30 gram per gallon rate of Alpine WSG. If ants are your primary target, then using 20 grams per gallon will give you a slightly slower kill to improve the transfer effect.
Please view the product label for more information.
Alpine WSG is not labeled for ornamental pests such as scale. We suggest Safari 20SG which has many applications for ornamental plants. Since orchids can be very sensitive, we always recommend testing a small area first for tolerance or consulting with a local or national orchid care group for their advice as well.
Alpine WSG uses soley the active ingredient Dinotefuran which is a Class 4A Neonicotinoid.
Demand Duo using Thiamethoxam (4A) and Lambda-cyhalothrin (3A) is referred to a “dual mode of action” insecticide meaning it contains 2 different class active ingredients which help prevent resistance or aversion that can develop with using the same class insecticide over a period of time.
You can mix Alpine WSG with 1 to 2 oz of Essentria IC3 Insecticide Concentrate in place of ExciteR Insecticide.
Please follow tank mixing procedures per the individual product labels and follow the more restrictive label on tank mxing.
Alpine WSG is not suppose to stain surfaces. We would recommend contacting the manufacturer at 1 800 526-1072 for more information on this matter.
Alpine WSG is not labeled to have a transfer effect like Phantom Termiticide Insecticide.
Yes, Alpine WSG would leave behind some residual on a porous surface, however some will inevitably absorb in as well. When treating exterior surfaces, it is recommended to treat the foundation and soil around the exterior perimeter as well as where utilities enter the home, gaps and voids in siding, around windows, doors and other entry points where insects may enter.
View page 7 for more information on the product label.
There really would be no reason to tank mix Alpine WSG with Cy-Kick CS or Taurus. They both are considered adulticides, but with different active ingredients. Exciter is meant to be added to insecticides to only give a faster initial knockdown and would not be good as a boost with Alpine WSG which is a non-repellent insecticide. Mixing something that is considered repellent with a non-repellent would null this aspect of the product until its residual was gone.
Alpine WSG does not need to be mixed with Fipronil. Fipronil can only be sprayed up a foot and out a foot from the foundation so if you are wanting to get more coverage, you do not want to mix the two together.
We are not medical professionals and we are not qualified to give medical advice. We recommend that your customer speaks to his doctor before Alpine WSG is sprayed.
No, Alpine WSG cannot be used in a car or vehicles. Maxforce Roach Bait Stations or the Advion Roach Bait Arenas can be used in vehicles for roaches. Bait stations need to be replaced every 2 weeeks unitl roach activity has stopped and depending on the infestation level, it will likely take several weeks to completely get rid of the roaches.
Before treating, we recommend vacuuming the car thoroughly focusing on really getting deep into the cushions/seats, around the center consoles, floorboards,as well as under the seats and trunk area. Wipe down all surfaces (cupholders, consoles, seat adjusments, door panels, etc with an approved auto cleaner to remove any liquid residue. Keep the vehicle free from food, eating dishes or utensils, cups or water sources, clothing, bags, cardboard boxes, etc that will attract roaches.
Alpine WSG is not labeled for carpet beetles.
We would recommend our Carpet Beetle KIt for a complete treatment program using NyGuard Plus Aerosol and Cimexa Dust. Please review our Carpet Beetle Treatment Guide for more information.
Alpine is highly toxic to all aquatic life and should not be used near any bodies of water including rivers, ponds or lakes. Applications should be avoided in areas where any runoff or drainage could occur from irrigation or heavy rainfall.
EcoVia EC or Essentria IC3 are both options for treating insects around bodies of water without harming aquatic life. Please reivew the product labels for application rates and more information.