Bonide Copper Fungicide Help - Questions and Answers

Bonide Copper Fungicide

Customer Q&A

Bonide Copper Fungicide

(3)

Free Shipping

Info / Buy Now

Ask Question

Asked by Martie from Poland, Oh

08/25/2018

Q

How do I mix Bonide Liquid Copper Fungicide Concentrate?

A

Unless otherwise stated on product label, mix 0.5 to 2.0 fluid ounces of Bonide Liquid Copper Fungicide Concentrate with 1 gallon of water.

Was this answer helpful to you? Yes No

66 of 129 people found this answer helpful.
Asked by Larry from Minneapolis Mn

07/03/2019

Q

How much Bonide Copper Fungicide per 2 gallons of water?

A

You would dilute 2.5 oz. of Bonide Copper Fungicide per 2 gallons of water.

Was this answer helpful to you? Yes No

37 of 59 people found this answer helpful.
Asked by Dan

04/27/2016

Q

Is Bonide Copper Fungicide a dust or a liquid concentrate?

A

Bonide Copper Fungicide comes as dust but has directions to mix with water if you would like to apply as a spray.

Was this answer helpful to you? Yes No

22 of 100 people found this answer helpful.
Asked by Cathye from Sturgis, Mi

10/18/2017

Q

How much Bonide Copper Fungicide do I use for a gallon sprayer?

A

(Using hand or tank sprayers) – Add proper amount (vary depending treatment) of Bonide Copper Fungicide powder to small amount of water, strain, add remainder of water and spray – agitate sprayer to keep nozzle from plugging. Apply 3 gallons of mixed solution to a small tree or bush, 6 gallons o…
Read Full Answer »
(Using hand or tank sprayers) – Add proper amount (vary depending treatment) of Bonide Copper Fungicide powder to small amount of water, strain, add remainder of water and spray – agitate sprayer to keep nozzle from plugging. Apply 3 gallons of mixed solution to a small tree or bush, 6 gallons of mixed solution to a medium size tree, or 9 gallons of mixed solution to a large tree. Thoroughly spray upper and lower surfaces of foliage to the point of runoff. Do not overspray. This product is intended for small garden use only.

Was this answer helpful to you? Yes No

12 of 149 people found this answer helpful.
Asked by Chuck from Spokane Wa

06/22/2019

Q

Is Bonide Copper Fungicide safe to use on mature azalea plants?

A

Yes, Bonide Copper Fungicide can be applied to established azaleas. Please see the product label for complete application instructions.

Was this answer helpful to you? Yes No

9 of 17 people found this answer helpful.
Asked by Richard from Worcester Vt

09/04/2018

Q

How much Bonide Copper Fungicide is needed per gallon of water to treat 1000 sq ft. of grapes?

A

For grapes, Bonide Copper Fungicide can be mixed at anywhere from 2-26 ounces of product per gallon to treat 1000 sq. ft., not to exceed 11.9 lb. annually.

Was this answer helpful to you? Yes No

6 of 24 people found this answer helpful.
Asked by Lynn from Glendale Ri

07/22/2021

Q

How long does the Bonide Copper Fungicide last once mixed in water?
I mixed 1 ounce in 1 gallon of water but did not use it all. Will the solution last.

A

Bonide Copper Fungicide must be used within 24 hours of mixing or discarded.

Was this answer helpful to you? Yes No

6 of 9 people found this answer helpful.
Asked by Tim from Olympia, Washington

05/12/2013

Q

Does Bonide Copper Fungicide contain copper octhanolate. Is it a replacement for phyton 27?

A

This product contains 7% copper sulfate. The Bonide Liquid Copper Fungicide is a 10% copper Octanoate. We are not sure what Phyton 27 is as we do not carry this product. We suggest you contact the manufacturer Bonide for further information at 1-800-536-8231.

Was this answer helpful to you? Yes No

5 of 8 people found this answer helpful.
Asked by John from Ashland Wi 54806

07/12/2014

Q

Bonide Copper Fungicide dust for cabbage in place of Sevin dust

A

Bonide Copper Fungicide will treat for disease on plants. Sevin will treat for insects. We do not ssee any way that you could use Bonide Copper in place of Sevin.

Was this answer helpful to you? Yes No

4 of 7 people found this answer helpful.
Asked by Rafael from Ca

12/11/2018

Q

How do I apply Bonide Copper Fungicide?

A

The application instructions for Bonide Copper Fungicide can vary depending on where and how you are using it. Please refer to the product label for specific application instructions.

Was this answer helpful to you? Yes No

4 of 34 people found this answer helpful.
Asked by Paula from Columbia, Va

07/02/2021

Q

Can Bonide Copper fungicide be mixed with Bonide Dead Bug and sprayed at the same time on tomato plants?

A

Yes, two Bonide Copper Fungicide and Bonide's Captain Jacks Dead Bug Concentrate can be combined and used in a hose end sprayer. Be sure to do a small tank test to ensure there is no clumping between the two products.

Was this answer helpful to you? Yes No

3 of 4 people found this answer helpful.
Asked by Margaret from Chicago, Il 60618

11/04/2019

Q

How much Bonide Copper Fungicide to use on plant in 6

A

Bonide Copper Fungicide is not labeled to be used on containerized plants.

Was this answer helpful to you? Yes No

2 of 8 people found this answer helpful.
Asked by Jacqueline from Sherburne

06/22/2022

Q

How much dry copper fungicide do I use for spraying roses?

A

According to the manufacturer's product label, to apply Bonide Copper Fungicide as a spray to roses, add 8 oz. of product to water and strain. Then, add that solution to 3 gallons of water to cover 1,000 sq. ft. of area, while continuing to agitate your sprayer to prevent the nozzle from clogg…
Read Full Answer »
According to the manufacturer's product label, to apply Bonide Copper Fungicide as a spray to roses, add 8 oz. of product to water and strain. Then, add that solution to 3 gallons of water to cover 1,000 sq. ft. of area, while continuing to agitate your sprayer to prevent the nozzle from clogging. Thoroughly spay upper and lower surfaces of foliage to the point of runoff, but do not overspray. Please refer to the linked product label above, and use as directed.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Dianne from Seattle, Wa

06/23/2022

Q

I have an empty copper fungicide hose end sprayer from last year. Can I use concentrate in it?

A

Yes, you can use the Bonide Copper Fungicide in the hose end sprayer you have but be sure you are mixing at the proper ratios.

Was this answer helpful to you? Yes No

1 of 3 people found this answer helpful.
Asked by Pat from Moore

03/30/2022

Q

Can Bonide Copper Fungicide be used in a fogger?

A

Bonide Copper Fungicide is not able to be used in fogging equipment and applied as dust or spray application. Please refer to the product label for complete application instructions.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Brigitte from Gates Mills, Oh

08/09/2021

Q

Can mixed solution of Bonide Copper Fungicide be saved and used at a later date?

A

Bonide Copper Fungicide should be used within 24 hours once mixed with water.

Was this answer helpful to you? Yes No

1 of 2 people found this answer helpful.
Asked by Patsy from Shreveport, La

02/24/2024

Q

How much of the Bonide Copper Fungicide do I use to spray a fig tree using a 2 gallon sprayer?
Use for a fig tree

A

You would dilute 2.5 oz. of Bonide Copper Fungicide per 2 gallons of water. Please see the product label for complete application instructions.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Dennis from Dahlonega

06/01/2021

Q

What is the per gallon mix of Bonide Copper Fungicide to water for tomatoes?

A

The rate for tomatoes when using Bonide Copper Fungicide is 2-4 1/3 oz in 3 gallons of water per 1000 sq ft. Please read over the label for complete application instructions.

Was this answer helpful to you? Yes No

1 of 4 people found this answer helpful.
Asked by Jim from Bolivar, Ohio

03/03/2024

Q

Can Fruit Tree and Plant Guard be mixed with Bonide Copper Fungicide, both Bonide products.
Mixing products

A

Bonide Copper Fungicide should be made in a separate application as directed from your application of the Fruit Tree and Plant Guard product.

Was this answer helpful to you? Yes No
Asked by Serhii from Schaumburg Il

04/29/2023

Q

How many ounces are needed to make a 1% copper solution in 1 gallon of water?
For thuja

A

The amount of Bonide Copper Fungicide powder to use will vary depending on the treatment. Please refer to the Spray Table beginning on page 4 of the product label. Application rates are based on what disease you are targeting and if you are applying to Fruits, Nuts, Vegetables, Herbs, or ornamentals…
Read Full Answer »
The amount of Bonide Copper Fungicide powder to use will vary depending on the treatment. Please refer to the Spray Table beginning on page 4 of the product label. Application rates are based on what disease you are targeting and if you are applying to Fruits, Nuts, Vegetables, Herbs, or ornamentals, flowers, shrubs, and/or vines.

Was this answer helpful to you? Yes No