BrushMaster Herbicide can be mixed with oil (mix with water to avoid harming grass). BrushMaster Herbicide will kill many species of weeds and brush that other products will not.

Ornamental Lawns and Turf

(Cool Season Grasses Other Than Bentgrass):

Not for use on turf being grown for sale or other commercial use as sod, or for commercial seed production, or for research purposes.

The best results will be obtained from spring or early fall applications when weeds have emerged and are actively growing. Avoid spraying during long, excessively dry or hot periods unless adequate irrigation is available. Do not irrigate within 24 hours after application.

USE PRECAUTIONS:

• Avoid spray droplets onto vegetables, flowers, ornamental plants, shrubs, trees and other desirable plants. Do not pour spray solutions near desirable plants.
• Do not use on carpetgrass, dichondra, St. Augustinegrass, bentgrass, nor on lawns or turf where desirable clovers are present.
• Use only lawn-type sprayers. Do not exceed specified dosages for any area.
• Do not apply to newly seeded grasses until well established. Seed can be sown 3 to 4 weeks after application.
• Do not spray when air temperatures exceed 85°F.
• Do not apply this product through any type of irrigation system.
• Do not use this product on or near desirable plants, including contact of spray on exposed root systems or adventitious shoots within the drip line of desirable trees and shrubs, since injury may result.

Application Rates

Apply 4 to 6 pints of product in 20 to 260 gallons of water per acre (1.5 to 2.2 fluid ounces of product in 1 to 6 gallons of water per 1,000 square feet). Use higher rates when using the higher volume of water per acre.

Limitations on broadcast treatments for ornamental turfgrass:

The maximum application rate is 6.0 pints of product per acre per application. The maximum number of broadcast applications is limited to 2 per year with a minimum of 30 days between applications. The maximum seasonal rate is 12.0 pints of product per acre.

Small Area Applications (Not Recommended For Hose End Sprayers)

For spot treatments and small areas, mix Gordon’s Brushmaster Herbicide at 1.5 fluid ounces per 1 gallon of water per 1,000 square feet or follow the recommendations for hand operated sprayers presented below. Spray emerged weeds that are actively growing at anytime of the season. On newly established lawns, apply Gordon’s Brushmaster Herbicide after the grass has been mowed at least 3 times. Do not water the lawn within 24 hours after application and observe use precautions.

Limitations on spot treatments for ornamental turfgrass:

Spot treatment is defined as a treatment area no greater than 1,000 sq. ft. per acre. The maximum application rate is 1.5 fl. oz. per 1,000 sq. ft. per application. The maximum number of spot treatments is limited to 2 per year with a minimum of 30 days between applications.