It is not recommended to apply CimeXa Insecticide Dust directly to bedding. We recommend applying the dust in box springs and into wall voids. For seams and folds of mattresses, we recommend a product like Bedlam.
CimeXa Insecticide Dust can be used to treat kennels, pet bedding/rest areas, floor and floor coverings, cracks behind molding and baseboards and other areas where pests may harbor. Do not apply directly to pets.
The inert ingredient part of any product, including CimeXa Insecticide Dust, is a trade secret and is not disclosed to anyone.
You should only apply small amounts of CimeXa Insecticide Dust. The dust should not be piled up as it could deter insects from crossing over it. It’s recommended to keep children and pets out until the dust has settled.
When treating for bed bugs, it is important to treat thoroughly the rooms where you have found evidence of bed bugs. We also recommend using residual spray and dust on the other sides of walls in adjacent rooms. You could potentially use CimeXa Dust under baseboards and behind outlet and switch plate covers in other rooms, too, for general pest prevention since this is a non-selective insecticide. You do not need to try to remove dust unless there is excess dust out in the open; dust in the open can be wiped up using a damp paper towel.
CimeXa dust can be applied to indoor cracks and crevices and joints of the furniture, and the folds, tufts and edges of cushions and other upholstered areas.
Per the Cimexa Insecticide Dust product label: Liquid Application: This product can also be used as a spray. Mix 1 lb. of product with 1 gallon of clean water. Apply approx. 1 qt of solution per 250 sq ft. of area to be treated. The product will be left behind after the water evaporates.
CimeXa and other insecticide dusts should be applied only as a crack and crevice or void application indoors, so it should not have negative impact if used correctly. Dust could cause irritation if it is over-used or applied in open areas where it could become airborne. You should always apply dust using a hand duster or bulb duster. If you have any health concerns, then we recommend wearing a mask or having someone else apply pesticides for you. Please consult a medical professional for any advice directly concerning your health.
CimeXa Dust is safe for pets when applied as directed on the product label. We would recommend only applying CimeXa Dust in cracks and crevices where it cannot be moved around easily and, thus, exposed to pets.
We do not suggest allowing any dust contact the records to avoid damage. We do offer Nuvan ProStrips that most folks will use for pictures, papers, books, music cds, dvds, electronics etc. It is not guaranteed that the treated crates will reach the bedbugs that could be potentially inside the sleeves.
CimeXa Dust is similar to diatomaceous earth in that it is an all-natural product that does not break down over time. However, CimeXa Dust is more finely processed than most DE products, allowing for very low use rates. CimeXa also works as a direct dessicant, meaning the insects only have to contact the dust for a short amount of time rather than actually moving across it, so it does kill a little more quickly than DE. CimeXa Dust will be effective as long as it is present in the treatment area and remains dry.
CimeXa Insecticide Dust is safe if pets are not present during the application when used as directed on the product label. It is best to keep pets out until the dust settles before they return to the treated areas. Typically you would apply in areas where pets are not going to have access to it, such as cracks and crevices or brushed down into carpets.
CimeXa only comes in a powder form.
When treating for bed bugs with CimeXa Insecticide Dust, it should be used in the dust form. The label states the following:
Remove bedding and take the bed apart. Treat the interior framework, joints and cracks in the bed frame. Treat the mattress and box spring, paying particular attention to tufts, folds and edges, and the interior framework of the box spring. Remove wall-mounted head boards and treat the back side. Treat picture frames, moldings, hollow furniture legs, cracks and crevices, along baseboards, and any areas with visible signs of infestation, including rugs and carpet. Treat upholstered furniture by removing or lifting (if possible) the cushions and treating the undersurface. Treat the interior framework, cracks and joints of the furniture, and the folds, tufts and edges of cushions and other upholstered areas. Do not treat toys and stuffed animals with product. Treat wall voids by removing electrical switch plate covers to allow access, but don’t apply dust directly in electrical boxes. Apply about ¼ oz of dust to each accessible void.
The label also states that when using it as a liquid application, the product does not dissolve in water and will be left behind and visible after evaporation.
When treating for bedbugs, it takes a combination of products to take care of the problem. Please view our Bedbug Control Kits and our Bedbug Control Guide for great information on treating for bedbugs and the best products for the job.
If you click through our General Pest Prevention Guide you can see a full array of both chemical and non chemical steps that can be taken to adequately protect any home. For a general use insecticide that would be safe, effective, and easy to use we would recommend using something like Bifen I/T. It can be broadcast across the lawn, bushes, trees, etc as long as its not being sprayed on any edible vegetation like a vegetable garden or fruit/nut trees. It can also be safely sprayed indoors around baseboards, cracks and crevices, behind and under appliances, as well as the perimeter of the home and its window and door frames. It dries clear, is virtually odorless, doesnt stain, and people and pets can resume normal activity in the areas that were treated once all surfaces have dried completely (normally 1-2 hours after you sprayed). An alternative option if you want something that could be sprayed across carpets and flooring for fleas indoors as well as all the other areas previously mentioned for the Bifen, then you could use a product like Onslaught Insecticide. Keep in mind that for fleas an IGR (insect growth regulator) is needed to help stop the reproductive cycle. If you have an active problem indoors and out for fleas you would need to mix in with the Onslaught an IGR like NyGuard to help keep them from continuously growing in number. If you would prefer to not use a concentrated spray mixture indoors on flooring and carpets for fleas, we would recommend instead to go with an aerosol product like Ultracide. Ultracide has the insecticide and IGR all in one product with a lighter and faster drying application method. You can review more info for how to do a complete flea treamtent on your pets, indoors, and outdoors in our Flea Control Guide. For roaches in specific, unless you have a roach infestation indoors you do not need to be putting out baits that come in the tubes. Baits are only usefull in active infestation situations, not for prevention. If you have a current roach problem then you would want to address it directly with one of our Roach Control Kits and look over our Roach Control Guide for all the tips and necessary steps needed to eliminate them completely. As far as insecticide powders/dusts go, Cimexa Dust by far is the best on the market and one of the most economical as well. It is all natural, waterproof, and in undisturbed areas like wall voids it can stay active in protecting your home for up to 10 years. It can be used in carpets for fleas, around furniture for bedbugs, and in wall voids and other crevices for any other pests that may find their way inside. You can apply it with the Bellow Hand Duster and if you scroll down on that product page you will find a handy “How To” video on using the duster and where to apply the Cimexa to get the most benefit from the product.
CimeXa Insecticide Dust can be applied with a bellow hand duster or bulb duster under baseboards, underneath carpeted edges, inside walls, and other tight spaces/voids.
CimeXa Insecticide Dust is a slow kill product and can take up to a week to kill an insect. It should not be the only product used to treat bed bugs for this reason. Using a combination of products is best. We generally recommend using one of our bed bug kits, which contain Cimexa dust along with other products. Beg bug treatments should be done every 7-10 days until you can go 30 days without seeing evidence or being bitten. Please take a look at our article on How to Get Rid of Bed Bugs for more information.
CimeXa Insecticide Dust cannot be used to treat bedding or clothing. These should either be washed and dried at the highest setting. For items that cannot be laundered, you can place in a sealed bag or container along with a Nuvan ProStrip for at least 2 weeks. A steamer would only be effective if you are able to contact the target insects during use.
Yes, to remove Cimexa Dust, you can simply vaccum the area and then rinse with soap and water. You should launder any fabrics that you think may have gotten the dust on them. Be sure to wear gloves while cleaning. Keep in mind that dusts like CimeXa should be use only accorrding to the product label as a crack and crevice or void treatment. You can use a damp paper towel to pick up excess dust during or after application.
Yes, to remove Cimexa Dust, you can simply vaccum the area and then rinse with soap and water. You should launder any fabrics that you think may have gotten the dust on them. Be sure to wear gloves while cleaning. Keep in mind that dusts like CimeXa should be use only accorrding to the product label as a crack and crevice or void treatment.
