The Ortho Dial N Spray Hose End Sprayer needs to be set to one of the 14 dilution settings (1 tsp to 8 oz per gallon of water) . The product will not dispense if the arrow above the dial points between settings.
Make sure the dial on the Ortho Dial N Spray Hose End Sprayer is set to a specific setting. The product will not dispense if the arrow above the dial points between settings. You should also remove the strainer from the end of the suction tube, clean under running water and put back on the end…
Read Full Answer »Make sure the dial on the Ortho Dial N Spray Hose End Sprayer is set to a specific setting. The product will not dispense if the arrow above the dial points between settings. You should also remove the strainer from the end of the suction tube, clean under running water and put back on the end…
Read Full Answer »The Ortho Dial N Spray Hose End Sprayer settings are measured from 1 tsp to 8 oz. You will set the product amount per gallon per product label instructions.
Ortho Dial N Spray Hose End Sprayer would not be recommend to apply hydrogen peroxide so we cannot advise on the rates for this use. The Chapin Industrial Poly Bleach 1 Gallon Sprayer can be used with hydrogen peroxide according to the manufacturer and would be a better option for your 50/50 s…
Read Full Answer »The Ortho Dial N Spray Hose End Sprayer needs to be set to one of the 14 dilution settings (1 tsp to 8 oz per gallon of water). The setting is based on the rate for the product you are using. We do not have the setting information for bleach and water mix nor recommend using bleach in this spra…
Read Full Answer »If setting the dial on the Ortho Dial N Spray Hose End Sprayer to 1 fl oz, this will be equal to 1 fl oz per gallon of water. If 4 fl oz of concentrate is in the container, that is equal to 4 gallons of mixed solution. This hose end sprayer disperses 2 gallons of mixed solution per minute theref…
Read Full Answer »There are 14 dial settings on the Ortho Dial N Spray Hose End Sprayer which are listed below. If the rate per gallon of water is not listed as one of the dial settings, please contact Ortho directly at (888) 270-3714 for their recommendations on the best dial setting or possibly doing the applic…
Read Full Answer »If you wish to use a Ortho Dial N Spray Hose End Sprayer to apply Bonide Fruit Tree Spray Concentrate at the recommended labeled rate of 1.5 to 2.5 tbs per gallon of water, you will need to calibrate the sprayer in order to find the proper setting for your application. There are 14 dilution s…
Read Full Answer »If the product you are using says to use 250 mL in 10 L of water, then that would equate to 8.45 oz in 2.64 gallons of water, or 3.25 oz in 1 gallon of water, regardless of what kind of sprayer you are using including the Ortho Dial N Spray Hose End Sprayer. We recommend that you always ready and fo…
Read Full Answer »
The Ortho Dial N Spray Hose End Sprayer needs to be set to one of the 14 dilution settings (1 tsp to 8 oz) per gallon of water. You may need to use a regular pump style sprayer to accurately measure your product.
The the 14 dilution settings on the Ortho Dial N Spray Hose End Sprayer range from 1 tsp to 8 oz per gallon of water. View the full product label for additional information.
Please provide the name of the the liquid copper product you will be applying with Ortho Dial N Spray Hose End Sprayer and what you are targeting for proper product rates. Thank you.
We apologize but cannot provide rates for home remedy's. Only products that give labeled instructions of rates per gallon can be used.