We do not recommend treating the inside of the home with Talstar P for flea control. It is a crack and crevice application indoors only. Fleas will be on the majority portion of the flooring and furniture. We recommendt that you treat with the products in our Indoor Flea Kit. Please take a few minutes to read our How to Get Rid of Fleas Article for more helpful information on eradication inside.
Camel spiders certainly look scary but are basically harmless. You can treat the exterior and interior of structures if needed with a product such as Talstar P. Talstar works well for spiders, scorpions and other invading pests. We usually would not recommend Termidor for spider control as it is a very slow acting insecticide.
According to the Talstar P product label "all pesticide handlers must wear a respiratory protection device when working in a non-ventilated space." Respiratory devices are not required for well ventilated spaces or outdoor applications. The Talstar P product label also says "all applicators should wear longsleeved shirt and long pants, socks, shoes and chemical-resistant gloves."
Talstar P is one of our most popular general pest control products that can be mixed with with water at 1 oz per gallon. It dries clear and is odorless. You will apply once a month to the exterior of the garage and other listed areas on the product label and quarterly to the interior crevices in the home and garage. It will eradicate crickets and over 75 other pests. Please see our Cricket Control page for additional information.
Talstar is often the go to product for interior plantscapes. The product is labaled for most plant infesting insects and can be used on plants indoors as long as they are non-edible.
Talstar P is not specifically labeled for lace bugs. Sevin Concentrate is labeled for treating lace bugs on azaleas.You will mix 1.5 fl oz per gallon of water per 1,000 sq ft.
Yes, Talstar P can be used with a garden hose end sprayer. Be sure to change the settings on the hose end sprayer to ensure you are mixing the correct amount.
Per the Talstar P label, when applying mixed solution, the applicator needs to wear shirt, shoes, socks, pants and waterproof gloves. If applying in a non-ventilated area, applicator will need to wear a resperatory mask. You may look at our Basic Safety Kit for the necessary protective gear.
Talstar P is labeled to be sprayed around ornamentals and in landscaped areas. So it should be safe for the arborvitae that you are asking about. As with any new area of spraying we suggest that you do a small test area just to be sure that it is tolerant of the product before doing a complete broadcast over the entire area.
Talstar P can be mixed at 0.5-1 fl oz per gallon per 1,000 sq ft for spittlebugs per the product label.
Unfortunately, Talstar P is not labeled to treat for fruit flies. Getting rid of fruit flies doesn't have to be diffucult. The most important step is to be sure that you discard or refrigerate any ripe produce as insects are naturally drawn to overripe, rotting, and spoled produce. Regularly rinse out and clean gargabe cans and recycling bins. Most times doing these small little things will take care of the problem. However, should you need to use a product to help you get rid of them one of the best ways to kill fruit flies is to use a fuit fly trap like the Vector 960 Furit Fly Trap. These have attractants in them that attract the fruit flies to them, and once they are inside they cannot get out. You can also use an aerosol product to help with the populations as well like 565 Plus XLO.
Yes, Talstar P is labeled for thrips, but it will take time to kill thrips and you should allow several weeks to see complete results.
Once you have added Talstar to the water for your mixed solution it should be used within 24 hours. It is not recommended to leave any solution in a sprayer for longer than that as it will loose effectivness.
Talstar P (Talstar One) is mixed at 1 oz per gallon per 1,000 sq ft. You will need approx. 44 fl oz to cover an acre (43,560 sq ft). It will offer a 90 day interior residual and 30 day exterior residual.
Talstar P (Talstar One) should be applied at 1 fl oz per gallon of water so 30 fl oz per 30 gallons of water.
No, unfortunately Talstar P (Talstar One) is not labeled for application directly into a vent as this could result in the insecticide making its way through your air vents and you could possibly inhale the product and breathe it in. If you feel that roaches are coming from your neighbor's apt we would suggest using a bait right outside of your vents. You could use Maxforce FC Magnum or any of the other excellent roach bait gels that we sell.
