Tenacity Herbicide
Customer Q&A
Product Question Search
Sort:
Sort Product Questions
  • Asked by Jim from Fort Morgan, Co
    05/04/2015
    Q
    In one answer about watering you state it does not need to be watered in because it is mixed with water;
    however, in another answer you state it does, indeed need to be watered in asap. could you please clarify which is correct. Thank you.
    A

    Tenacity is a systemic preemergence and postemergence herbicide for the selective contact and residual control of weeds in turfgrasses. When applied as a preemergent, weeds absorb Tenacity during emergence from the soil. Dry conditions following application may reduce the preemergence activity. If r…

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    1321 of 1380 people found this answer helpful.
  • Asked by Lori from Keokuk, Ia
    07/20/2015
    Q
    After spraying Tenacity Herbicide, when the weeds turn white, do you pull them or just reseed?
    I was told I had nimblewill in my yard. It was a large portion with green blades and brown plus some other weeds. I purchased tenacity from you and applied it. The areas that were brown and green haven't turned white but the are scattered portions of other weeds that have. Does that mean anything? Also, am I supposed to pull them after they turn white and reseed?
    A

    After spraying with Tenacity Herbicide, the foliage of treated weeds cease growth after application, then turn white (loss of chlorophyll), and death may take up to three weeks. A repeat application is required after two to three weeks for improved postemergence weed control. We would not recommend …

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    1005 of 1088 people found this answer helpful.
  • Asked by Wayne
    04/21/2015
    Q
    How soon can I mow my lawn after an application of Tenacity?
    A

    You can mow your lawn 2 days before application of Tenacity Herbicide and 2-3 days after application. 

    Was this answer helpful to you?   Yes No
    1004 of 1029 people found this answer helpful.
  • Asked by Douglas from Winter Haven, Fl
    10/25/2015
    Q
    What is the amount of Tenacity per gallon for application on a St. Augustine lawn per 1,000 sq ft?
    The label only discusses per acre application. How do you break that down per gallon in a sprayer or per 1000 sq ft application? I am using a 4 gallon backpack sprayer.
    A

    According to the Tenacity product label for smaller applications, you will need to mix 0.5 tsp of Tenacity and 1.5 tsp of surfactant to one gallon of water covering 1,000 sq ft.

    Was this answer helpful to you?   Yes No
    882 of 942 people found this answer helpful.
  • Asked by Mary from Marshfield, Wi
    10/11/2011
    Q
    Do I need to keep the dogs away from the area where I have applied Tenacity?
    A

    You should keep the dogs off of the area while you are applying Tenacity and until the area has had a chance to dry, about 2-4 hours.

    Was this answer helpful to you?   Yes No
    789 of 810 people found this answer helpful.
  • Asked by Frank from Plattsmouth, Ne
    06/09/2015
    Q
    What is the maximum application temperature for Tenacity?
    Heat spell, but I need to get a second spraying on the weeds in the buffalo grass before it rains for the next week or two. Want to know if I can spray it at exterior temps over 90 degrees.
    A

    Tenacity Herbicide should not be applied to the lawn when temperatures are over 90 degrees or on day when you are expecting rainfall.

    Was this answer helpful to you?   Yes No
    605 of 635 people found this answer helpful.
  • Asked by Marlin from Evansville, In
    07/25/2015
    Q
    Would it be OK to apply Tenacity Herbicide in the evening, after it cooled down for the day?
    No application above 80 deg. Does that mean don't apply anytime when temps are consistently above 80 or just not at the exact time it's that hot? Would it be OK to apply in the evening, after it cooled down, even though it gets that hot during the day? Or should I wait a couple of months until consistently cooler temperatures set in?
    A

    When the label states that no applications should be made when temperatures are above 80 degrees, this means that the product should not applied when it is 80 degrees and above. Tenacity Herbicide can be sprayed in the evening time and/or early morning hours.

    Was this answer helpful to you?   Yes No
    554 of 615 people found this answer helpful.
  • Asked by Josh from Trumbull, Ct
    08/09/2017
    Q
    How soon can I reseed after using Tenacity Herbicide?
    Assuming it kills creeping bentgrass in a few weeks, or maybe longer if more applications are needed, how long should I wait before reseeding?
    A

    Tenacity Herbicide can be used at the time of seeding or right after for most grass types. Fine fescue is the only grass seed that should not be used at the time of application. It is recommended that you wait 2-4 weeks after an application of Tenacity Herbicide to reseed with fine fescue.

    Was this answer helpful to you?   Yes No
    527 of 563 people found this answer helpful.
  • Asked by Ty from Spokane, Wa
    06/02/2015
    Q
    How long after application is Tenacity rainfast?
    Applied 4oz/acre to 30 day old seedlings and got 1.5" of rain a few hours later. Rainfall was quick enough to cause flooding, 1.5" in about 2 hours. Will the Tenacity application be effective?
    A

     Tenacity Herbicide will be rainfast 4 hours after it has been applied or after it has dried. 

    Was this answer helpful to you?   Yes No
    490 of 516 people found this answer helpful.
  • Asked by Dale from Leesburg,va
    08/05/2013
    Q
    Is Tenacity Herbicide bad for pets?
    A

    Tenacity herbicide is safe to use in a yard will pets will frequent as long as they are out of the area during the application. They can safely return after the area has dried.

    Was this answer helpful to you?   Yes No
    441 of 476 people found this answer helpful.
  • Asked by Thomas from Cut Off, La.
    03/10/2014
    Q
    What is the shelf life of Tenacity?
    A

    The shelf life on most liquid herbicides all depends on how they are stored. If the product has been tightly sealed and kept out of sunlight and extreme temperatures, the shelf life is 3-5 years.

    Was this answer helpful to you?   Yes No
    393 of 413 people found this answer helpful.
  • Asked by Ken from Martinsville, In
    08/09/2015
    Q
    Can Tenacity Herbicide be stored after mixing with water and surfactant for use at a later date?
    I mix Tenacity, a surfactant, and water in one gallon batches to spot treat my lawn using a pump sprayer. I frequently have part of a mixture left over when I finish treating. Can I store it for two weeks and use it for a follow up treatment?
    A

    Tenacity that has been mixed with water and a surfactant should be used within 24 hours of mixing and then discarded. If it is in its original container and stored away from extreme temperatures, it will have a three year shelf life unmixed.
     

    Was this answer helpful to you?   Yes No
    382 of 405 people found this answer helpful.
  • Asked by P from Wisconsin
    05/30/2015
    Q
    Will food coloring work to mark areas on turf that I spot sprayed ?
    A

    Yes, some folks do use food coloring to mark where  Tenacity Herbicide has been applied. 

    Was this answer helpful to you?   Yes No
    380 of 409 people found this answer helpful.
  • Asked by Dale from Crete, Ne
    06/16/2016
    Q
    If it is 70 degrees in the morning and will get up to 95 in the afternoon, can I still apply Tenacity Herbicide?
    I noticed a question about temperature and application of Tenacity, you stated it can be applied up to 80 degrees. Is that during application?
    A

    When mentioning Tenacity Herbicide and temperature, we are referring to the temperature at time of application. If it gets above 70 degrees after your application has dried, that is okay. 

    Was this answer helpful to you?   Yes No
    380 of 397 people found this answer helpful.
  • Asked by Steve from Allison Park Pa
    06/14/2015
    Q
    Does Tenacity Herbicide need to be watered in after applying?
    A

    After treating with Tenacity, you want the product to have at least 6 hours of dry time before any rain or irrigation occurs. You do not want/need to water after a post emergent application. We recommend using the spot treatment rate of Tenacity in the dense areas so as to not cause damage to y…

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    351 of 381 people found this answer helpful.
  • Asked by Linda from Mcmurray Pa
    09/14/2013
    Q
    Does Tenacity control creeping charlie?
    A

    Yes, Tenacity is labled to control Ground Ivy "Creeping Charlie" as post emergent control. We highly recommend using a temporary turf colorant like Turf Mark Blue so that you can see where you spray with the Tenacity to avoid overlapping. Tenacity is a great product, but also a very strong product s…

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    285 of 300 people found this answer helpful.
  • Asked by Mike from Wilton, Ct
    07/12/2015
    Q
    How long does Tenacity take to kill plants?
    I used the recommended spot treatment amounts of Tenacity with surfactant. Even applied 2nd treatment to most of it. Most leaves turned white as expected but not all and the weeds did not die. Now all it of appears to have recovered as most of it is a normal green. What do I do now? Try again? I am worried about applying too much but the nimblewill will not die but turned white.
    A

    The foliage of weeds treated with Tenacity cease growth after the application, then turn white (loss of chlorophyll), so death may take up to three weeks. A repeat application is required after two to three weeks for improved postemergence weed control.

    Was this answer helpful to you?   Yes No
    231 of 283 people found this answer helpful.
  • Asked by Scott from Grosse Ile Michigan
    03/08/2012
    Q
    After applying Tenacity and surfactant how long do you have to wait to seed or sod?
    A

    According to the Tenacity product label "Apply Tenacity at 5-8 fl. oz. per acre in at least 30 gallons of water per acre prior to seeding or post seeding of tolerant turfgrass species listed on this label, except fine fescue. Tenacity may reduce density of fine fescue seedings. Tenacity can be used …

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    227 of 314 people found this answer helpful.
  • Asked by Marty from Meriden, Ct
    09/25/2015
    Q
    How long after apply Tenacity Herbicide can the grass be cut?
    Answer to Wayne is 2-3 days. Answer to Nancy is 5-7 days. Big difference! Also after applying tenacity when can the lawn go back to its watering cycle. Both of my questions, cutting and watering either pre or post, strive to allow the best conditions to get the best per application. I must have missed reading these things in your attached literature. Thank you. Lastly when can I continue with fertilizing the lawn after an application?
    A

    When using Tenacity Herbicide or other post-emergent herbicides, you should not mow at least 2 days before or 2 days after applying the product. You should avoid spraying on newly germinated turgrass plants, and wait until newly germinated turf has been mowed 2 times or 4 weeks after emergence (whic…

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    223 of 233 people found this answer helpful.
  • Asked by Mike from Groton, Ma
    04/21/2014
    Q
    Is it possible to use a hose end sprayer to apply Tenacity?
    A

    Tenacity should not be applied with a hose end applicator. Tenacity if not applied evenly across the yard can temporarily whiten your lawn and cause you to not see full control of the weeds you want to eliminate. Also most hose end sprayers will not dial down to the small amounts needed per 1000 sq/…

    Read Full Answer »
    Was this answer helpful to you?   Yes No
    206 of 225 people found this answer helpful.
×