GENERAL INFORMATION

Bifen XTS used in and around structures and building construction will prevent and control termite infestations.

To institute a barrier between the wood and the termites in the soil, the chemical dilution must be effectively dispersed in the soil. It is important to remove unnecessary materials that contain cellulose and wood from around foundation walls, crawl spaces (inside of structure), and porches, and fix damaged plumbing and construction grade in order to deny termite access to moisture. Treat the soil around untreated structural wood in contact with soil.

APPLICATION

Subterranean Termite Control

Lawns:

Bifen Xts may be used as a broadcast treatment. To accomplish uniform control when applying to dense grass foliage, use volumes of up to 10 gallons per 1,000 square feet. For low water volume usage, less than 2 gallons/1,000 square feet, addition of a non-ionic or silicone based surfactant (0.25% v/v) is recommended, as is immediate irrigation of treated area with at least 0.25 inches of water following application to ensure efficacy of sub-surface pests including mole crickets.

Ornamentals and Trees:

dilute 0.26 to 1.28 fl. oz. of Bifen Xts per 10 gallons of water and apply at the rate of 10 gallons per 4,356 square feet. One gallon of finish spray will treat 435 sq. ft. If a higher volume application is needed to sufficiently cover the plant canopy, Bifen Xts can be diluted in large volumes of water and applied through low volume equipment as long as the maximum label rate (1.28 fluid ounces per 4,356 square feet) is not exceeded.

WARNING: This product can expose you to chemicals including naphthalene which is know to the State of California to cause cancer. For more information go to https://www.P65Warnings.ca.gov