Gilbert 601T The Don Light Trap Help - Questions and Answers

Gilbert 601T The Don Light Trap

Customer Q&A

Gilbert 601T The Don Light Trap

(2)

Free Shipping

Info / Buy Now

Ask Question

Asked by Don from Wildwood, New Jersey

06/10/2015

Q

Is the Gilbert 601T The Don Light Trap intended for exterior use?

A

The Gilbert 601T is designed mostly for interior uses or in exterior areas where the trap is covered from the weather and not in direct competetion with other main light sources.

Was this answer helpful to you? Yes No

5 of 5 people found this answer helpful.
Asked by Jim from Utica New York

04/20/2015

Q

LOOKING FOR REPLACEMENT BULBS FOR THE DON 601T

A

We do have the replacement bulbs for the Gilbert 601T The Don Fly Light. They are the Sylvania F40/350BL/ECO. Please give us a call to order these. Our phone number is 866-581-7378.

Was this answer helpful to you? Yes No

4 of 5 people found this answer helpful.
Asked by Doug from Medina, Ohio

02/22/2017

Q

Will the GIlbert 601T The Don Light Trap work in a dusty environment?
I own a chicken barn and sometimes there is dust in the air but the fans clear it quickly. The unit will be used indoors.

A

You could use the Gilbert 601T The Done Light Trap. You may just need to replace the glue boards more often if there is a lot of dust in the air.

Was this answer helpful to you? Yes No

2 of 5 people found this answer helpful.
Asked by Israel from Mouton

11/15/2018

Q

How many square feet will the Gilbert 601T The Don Light Trap cover if used in a warehouse?

A

According to the manufacturer, the general rule of thumb has been to space large traps such as the Gilbert 601T The Don Light Trap every 40 feet around the inside perimeter wall. If you multiply 40 x 40, you get 1600 square feet. However, the number of traps required will vary with the type and …
Read Full Answer »
According to the manufacturer, the general rule of thumb has been to space large traps such as the Gilbert 601T The Don Light Trap every 40 feet around the inside perimeter wall. If you multiply 40 x 40, you get 1600 square feet. However, the number of traps required will vary with the type and condition of the facility and the extent of the problem. If your building is next to a cow pasture, an unkempt dumpster, or if there are several cracks and crevices you may need more then one every 40 feet.

Was this answer helpful to you? Yes No

2 of 3 people found this answer helpful.
Asked by Khanh from Allentown,pa

07/17/2018

Q

Does the Gilbert 601T The Don Light Trap kill flies instantly and does it use a glueboard?

A

The Gilbert 601T is designed mostly for interior uses or in exterior areas where the trap is covered from the weather and not in direct competetion with other main light sources. This unit does not use a glue board. Flies are lured in by the light and killed instantly when they contact the light.�…
Read Full Answer »
The Gilbert 601T is designed mostly for interior uses or in exterior areas where the trap is covered from the weather and not in direct competetion with other main light sources. This unit does not use a glue board. Flies are lured in by the light and killed instantly when they contact the light.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Jm from Lincoln Nebraska

08/13/2022

Q

On the 601t..how many volts is the load side supposed to produce? I'm reading 160v potential on both sides but
Bugs are landing on zapper rods and flying away just fine.

A

We reached out to Gilbert to speak to a technician on their team about the Gilbert 601T The Don Light Trap. As far as testing the voltage on that unit goes, you would not be able to test it with a standard electricians volt reader. He stated its a special design and a special took that he has to use…
Read Full Answer »
We reached out to Gilbert to speak to a technician on their team about the Gilbert 601T The Don Light Trap. As far as testing the voltage on that unit goes, you would not be able to test it with a standard electricians volt reader. He stated its a special design and a special took that he has to use when their units come in to check for the correct voltage. The unit should be putting out about 4500V, and he said the most common instance they see when what you are describing is occurring, is one of the grid wires is touching another one or something that is causing it to ground out, and not have enough juice to zap the bug. We would suggest unplugging the unit and checking to see that no grid wires or parts are touching to impact this. If this does not solve the issue, you may need to reach out to Gilbert directly for more assistance. Their technical rep Randy can be emailed with photos or video of what you are experiencing for troubleshooting help, and you can reach him at [email protected] .

Was this answer helpful to you? Yes No
Asked by Leonel from Glendale

10/29/2022

Q

How many watts is the light bulb in the Gilbert 601T The Don Light Trap?

A

The Gilbert Fly Light Trap - The Don (601T) uses 2 two 40-watt Sylvania F40/350BL/ECO bulbs per unit.

Was this answer helpful to you? Yes No