Hi-Yield 2, 4-D Selective Weed Killer is safe for pets and children to re enter treated area after drying. Please allow at least 2 hours to completely dry and become rainfast.
Per the label recommendations, you will mix 1 gallon of Hi - Yield 2, 4 - D with 15 gallons of water into your 15 gallon sprayer which will cover 1 acre.
Hi-Yield 2, 4D Selective Weed Killer is labeled for use on lawns, around ponds, drainage ditchbanks, pastures and rangelands. It should not be used on shrubs. It should not penetrate the ground and kill the shrubs. It should last for the entire season but if not, another application can be made afte…
Read Full Answer »
Correct, you want to mix 4 oz. Hi-Yield 2, 4-D Selective Weed Killer per 1 gallon of water to treat for clover and dollarweed.
You would use 1 gallon of Hi-Yield 2, 4-D Selective Weed Killer in 15 gallons of water per acre.
Hi-Yield 2, 4-D Selective Weed Killer can be applied to established listed turfs only.
The mixing ratios will vary according to where you are treating and what you are treating for. According to the Hi-Yield 2, 4-D Selective Weed Killer product label: For Spot treatment in non-crop areas: Use 1 …
You will need to keep all pets and children out of the area while you treat using Hi-Yled 2,4-D Selective Weed Killer and until all plant surfaces have dried completely (1-2 hours at most), Once dry it is completely safe for pets to return to the yard and resume normal activity.
Hi-Yield 2, 4-D Selective Weed Killer is not labeled to treat for Crabgrass. Depending on what type of turf grass you have, we recommend to Drive for Crabgrass control.
You will use 2 gallons of 2,4-D Selective Weed Killer in 15 to 50 gallons of water per acre or Use 16 oz. in 1 to 8 gallons of water per 2,725 sq. ft. The amount of product is what is important when you are using a product like this. Water is only used as a carrier.
Hi-Yield 2, 4-D Selective Weed Killer should be applied when the ground is not saturated and rain is not expected for at least 24 hours.
You would want to dilute Hi-Yield 2, 4-D Selective Weed Killer down to approx. .8oz per 24oz of water.
Hi-Yield 2, 4-D Selective Weed Killer does not list on the product label that it is safe for use around edibles, only in non-crop areas. The Avenger Weed Killer Concentrate is safe for use around edible vegetation and fruit trees as it does not persist in the soil and is approved for organic garde…
Read Full Answer »In general you want to apply Hi-Yield 2, 4-D Selective Weed Killer when rain is not expected within 24 hours of application,
You can apply a fertilizer at any time after applying Hi-Yield 2,4-D. If the fertilizer needs to be watered in, you will need to wait 24 hours to allow the 2,4-D to fully dry before applying the fertilizer.
Hi-Yield 2, 4-D Selective Weed Killer is safe to use on established Bermuda for broadleaf weeds. It can be used as either a spot or broadcast treatment as directed on the product label.
One quart Hi-Yield 2, 4-D Selective Weed Killer yields 6 gallons for spot treatment or treats 5,450 sq. ft. of turf area. 1 gallon treats up to 1/2 acre of ornamental turf area.
You can apply Hi-Yield 2, 4-D Selective Weed Killer to the grass directly after it has rained, however the product may not stick to the grass as well. If you add a surfactant you may get better results. This product will still work, however it may not work as fast, or you may need to treat again.…
Read Full Answer »The mixing ratios for Hi Yield 2,4-D will vary according to where you are treating and what you are treating for. According to the product label: For spot treatment in non-crop areas, use 1 pint in 3 gallons of water or 4 oz. in 3/4 gallon in a hand sprayer. In pastures and range land, use 3 to 4 …
Read Full Answer »Hi-Yield 2, 4-D Selective Weed Killer can be used anytime your weeds are actively growing.
For best results, you should mow 1 to 2 days before application of Hi-Yield 2, 4-D Selective Weed Killer.